User:PowerfulBacon/Sandbox: Difference between revisions

From BeeStation Wiki
Jump to navigation Jump to search
Line 91: Line 91:


== Building your shuttle ==
== Building your shuttle ==
=== 1. Building the frame ===
To start, build the frame of your shuttle.
-The frame must be airtight and all corners must be filled, place walls over where you want your thrusters to be, and remove them later.
-The frame must have at least 1 door.
-Any turfs that extrude from the hull will not be included
-The frame must not include parts of the station ('''WARNING, THIS INCLUDES THE LATTICES CONNECTED TO THE STATION. DO NOT BUILD OVER THEM''')


== Using your shuttle ==
== Using your shuttle ==

Revision as of 17:17, 9 April 2020

Custom shuttles are a way to build functioning shuttles that can maneuver around the station and other z-levels. While normal space ruin shuttles are free, custom shuttles require fuel and a lot of time to get working properly, so be ready for a huge commitment if you want to fly around on your own private shuttle.

An example of shuttles being used.

How custom shuttles function

Custom shuttles require a lot more maintenance than other shuttles, such as the Whiteship ruin however, they don't require you to get lucky and hope that it spawns.

Shuttle Machinery

Flight Console
Flight Console
Found in: Built using a circuitboard from engineering or science.
Used for: Selecting and flying to destinations. Once built use the rapid shuttle designator to link to the shuttle.
Description
The flight console is the main controller of the shuttle, this machine is important for shuttles and will allow you to target and fly to destinations.

The flight console can target 2 destinations by default:

- The auxiliary docking port.
- Custom target selected through the shuttle docking station.

This computer doesn't actually have to be built on the shuttle and can be placed station-side if you need to recall your ship in a pinch because someone peacefully borrowed it for their needs.

Calculate Stats

The 'calculate stats' button calculates the stats of the shuttle allowing you to see how it will perform.

Sublight Velocity

The subspace velocity of a shuttle is a measure of the engine power relative to the size of the shuttle. If this value is lower than 1, the shuttle will not operate and higher values will knock or even throw the people inside around. The advantage, however, of making this higher is that you will reach your destination faster.

Shuttle Mass

A measure of how much is on the shuttle. This is directly proportional to the number of turfs on the shuttle, so filling your shuttle with heavy machines will not decrease its speed.

Engine Force

Engine force is a measure of the combined power of all of the active engines. Engines that have no fuel or an incorrect setup (no heater) will not be included in this calculation. The more force you have, the greater the sublight velocity will be.

Fuel Consumption

This is the combined amount of plasma that the engines will use per distance moved. Fuel Consumption * Distance = Plasma Cost

Engine Cooldown

The time it takes for you to be able to move again after you move the ship. In practice, even if this value is very high, the shuttle will still be able to move only a short amount of time after moving, so there isn't much to worry about for this.

Private Navigation Computer
Private Navigation Computer
Found in: Built using a circuitboard from engineering or science.
Used for: Choosing a custom destination to fly to, for when you want to actually go somewhere other than the auxillery port. Once built use the rapid shuttle designator to link to the shuttle.
Description
The private navigation computer allows for the pilot(s) to select a destination to fly to on the current z-level. Much like the whiteship docker, it can jump to any Bluespace Gigabeacon, but by default will only allow you to view the current z-level and the station z-level.

Using the console will give you a view of the ship, as well as a map of the current z-level allowing you to move around freely and set a target destination, which takes 10 seconds. If war is declared, this console will not be usable and the shuttles will only be able to travel to the station's auxiliary docking port, as well as most ships (such as the nuclear operative ship) being invisible on this camera.

Plasma Thruster
Plasma Thruster
Found in: Built using a circuitboard from engineering or science.
Used for: Required by shuttles to actually move.
Description
The plasma thruster is a thruster thats cheap in research, but quite expensive to operate.
Required Components

Capacitor (Any) *2 Cable Coil *5 Laser (Any) *1

Statistics

Thrust = 25N Fuel Use = 0.24 plasma per unit distance Cooldown = 2.4 seconds


Void Thruster
Void Thruster
Found in: Built using a circuitboard from engineering or science.
Used for: Required by shuttles to actually move.
Description
The void thruster is an incredibly powerful (overpowered) thruster that requires no heater, no fuel and produces a ridiculous amount of thrust, however it requires alien tech to be researched prior to the research that unlocks it.
Required Components

Capacitor (Quadric) *2 Cable Coil *5 Laser (Quad Ultra) *1

Statistics

Thrust = 400N Fuel Use = Does not use fuel Cooldown = 9 seconds

Notes

Does not require an engine heater at all to operate.

Building your shuttle

1. Building the frame

To start, build the frame of your shuttle. -The frame must be airtight and all corners must be filled, place walls over where you want your thrusters to be, and remove them later. -The frame must have at least 1 door. -Any turfs that extrude from the hull will not be included -The frame must not include parts of the station (WARNING, THIS INCLUDES THE LATTICES CONNECTED TO THE STATION. DO NOT BUILD OVER THEM)

Using your shuttle

Additional Infomation