Guide to the Supermatter: Difference between revisions

From BeeStation Wiki
Jump to navigation Jump to search
imported>Kingfish
 
(163 intermediate revisions by 32 users not shown)
Line 1: Line 1:
The Supermatter Crystal is the primary power source in most stations. A Supermatter Shard can be ordered from [[Cargo]], which works the same way, but can be moved around. Its primary features are emitting tons of radiation, making everyone who could theoretically see it hallucinate, releasing hot oxygen and plasma, heating the air around, and exploding or creating singularity/tesla if you screw up. It begins inert but being hit by an object or projectile will activate it and it'll start producing huge amounts of radiation, which can be converted to power with the radiation collectors.
The Supermatter Crystal is the primary power source in most stations. A Supermatter Shard can be ordered from [[Cargo]], which works the same way, but can be moved around. Its primary features are emitting tons of radiation, making everyone who could theoretically see it hallucinate, releasing hot oxygen and plasma, heating the air around, and exploding or creating singularity/tesla if you screw up. It begins inert but being hit by an object or projectile will activate it and it'll start producing huge amounts of radiation, which can be converted to power with the radiation collectors.
{| width='95%' height='60' style='background-color:#FFCCCC;' align='center'
|align='center'|'''Do NOT run into the Supermatter to commit suicide! You will be banned.'''
|}
== Words of Warning ==
# The Supermatter is '''VERY DANGEROUS'''. Activating the Supermatter should be the last step in setting up any form of Supermatter based power! If you ordered it from cargo the crate should stay '''LOCKED AND SECURED''' until everything is ready.
#Do NOT setup the Supermatter's air alarm until you are ''<u>absolutely satisfied</u>'' the supermatter pipe loop. A common delamination occurs when engineers scrub the gases from the supermatter first without replacing it with a suitable gas. A void of gases will quickly spawn '''MASSIVE''' amounts of oxygen and heat, which can only be stopped by an extremely robust Atmosian.
# You require safety gear. A full radiation suit and meson scanners.
# Most of "setting up the Supermatter" involves a gas loop that is designed to cool down the Supermatter chamber. While not required, please have some knowledge of gasses or atmospheric properties.
# Anything that bumps into the Supermatter is fundamentally annihilated. '''Don't touch it.'''
# Hardsuits, excluding the CE's hardsuit, have limited radiation protection. The engineering hardsuit has 75% radiation protection. [[Chief_Engineer|CE's]] hardsuit has 100%. [[Atmospheric_Technician|Atmos]] hardsuit has 25%. [[Research_Director|RD's]] and [[Chief_Medical_Officer|CMO's]] have 60%. If working near an active Supermatter Engine, use a radiation suit instead.
== The Safe Setup ==
The supermatter engine on current (2021) rotation maps can be set up in many different ways and experienced engineers are encouraged to experiment. The less experienced engineers can refer to the safe guide below. This is a simple nitrogen setup, easy to maintain and has two methods to handle sabotage (freezer backup and N<sub>2</sub> preset). It will almost always last the entire round, and almost always generates enough power for the entire station.


'''Do NOT run into the Supermatter to commit suicide! You will be banned.'''
There is an old video setup guide [https://www.youtube.com/watch?v=Avec0T2-Xhk here], but the recommended guide below has changed since that video was made.
==== Step One: Gear Up ====
# Put on an optical meson scanner [[File:MGlasses.png]] or Engineering scanner goggles [[File:EngiScanners.png]] on meson mode. All races except IPCs and Plasmamen will require a radiation suit [[File:RadiationSuit.png]][[File:RadiationSuitHood.png]] in case someone prematurely activates the supermatter crystal.
#:'''Why:''' Meson Scanners protect from hallucinations, while the suit protects from radiation. IPCs, Skeletons, and Plasmamen are inorganic and thus are immune to most of radiation's effects, but they CAN still suffer hallucinations. Once the engine is started, it will emit both.
# Grab both a Rapid Piping Device [[File:Rpd.png]] and wrench [[File:wrench.png]]. You will be using these tools to edit or optimize the SM near constantly, so it's always good to keep them on your character.
#:'''Why:''' The Piping Device can place or destroy pipes, as needed. While the wrench is the device to either secure or unsecure the item in place.
[[File:Meta_SM.png|400px|thumb|right|Meta Station SM. Enable and max green circles. Works counter clockwise. Toggle yellow squares, set gas. Enable cyan triangles and minimize temperature.]]
[[File:Box_SM.png|400px|thumb|right|Box Station SM. Works counter-clockwise.]]
[[File:Pubby_SM.png|400px|thumb|right|Pubby Station SM. The gas loop works clockwise here.]]
[[File:Delta_SM.png|400px|thumb|right|Delta Station SM. Works clockwise. The freezers are optional security in N2 setups. You would need to reconstruct part of the pipe and deconstruct the heater in order to enable them.]]
==== Step Two: Prepare The Gas Loop ====
# Unwrench and replace '''gas pumps''' (green circle in picture) and replace them with straight pipes.
#:Why: Whoever designed this horrible loop has no idea how gases actually operate. If you expect to be constantly pumping gases through an area, the pumps will actually ''slow them down.'' Be certain
# Toggle the '''gas filters''' (yellow square in picture) ON and set to desired gas. By default, the filters have the correct N<sub>2</sub> setup preselected, thus you can turn on all five. The first filter leading to canisters (green square) is for farming gases. If you want a panic button, you can set one filter to N<sub>2</sub>O also, as N<sub>2</sub>O is effective at extinguishing flames, should you get sabotaged. However, at VERY high temperatures, this will backfire.
#:Why: The gas filters work by separating individual gases from a pipe. In the safe setup, this means that N<sub>2</sub> is removed from an array of other harmful gases that exhaust from the SM like plasma. The exhaust exits the red pipe to space. By setting a filter to N<sub>2</sub>O, you can easily wrench in an N<sub>2</sub>O canister [[File:N2O_Canister.png]] to extinguish most early destabilization.
# Wrench [[File:wrench.png]] '''one of the''' red '''N<sub>2</sub> canisters''' [[File:N2_Canister.png]] to activate the gas loop. This should be done when you have finished setting up the rest of the loop. Keep the other unwrenched so if, for some reason, the supermatter is deprived of nitrogen and you need new Nitrogen quickly. Wrenching them both when not needed is a waste.
#:Why: Nitrogen (or whichever gas you end up using) must be put in the pipes in order to circulate. If you need to add other gases, you can add them here also or through the ATMOS to SUPERMATTER pump.
# Set the '''air alarm''' [[File:AirAlarm.png]] next to the crystal room. Open the air alarm menu (on most maps it will start unlocked), click ''Scrubber Controls'' and change the scrubbers to '''siphon''' (by clicking "scrubbing") and Expanded Range. You don't need to change any of the filter settings besides the mode, since, on "siphon", all gases get sucked out. The scrubbers will show an animation if they are set up to siphon correctly. '''Do NOT set the operating mode to "panic siphon"''' as that's not the same thing. Picture (click it): [[File:SM_safe_setup_scrubbers_aug_2019.png|30px|Scrubber Controls]]
#:Why: Siphon makes the scrubbers remove all gases. This is to ensure hot gasses are removed from the chamber as fast as possible, to prevent too high pressure in the chamber.
# In the same air alarm, from the main menu, click ''Vent Controls'' and disable both regulators.
#:Why: Some players insist that "Internal 0" is the best setting for the vents, but it is functionally identical to simply disabling both regulators, the former is also far less confusing.
==== Step Three: Starting The Radiation Collectors ====
# Obtain six plasma tanks [[File:Plasma tank.png]]. One can be found by the radiation collectors, and up to ten more can be taken from the tank dispenser. [[File:Tank Dispenser.png]] Feel free to unwrench the dispenser for easier transportation.
#Use either the Plasma canister in Secure Storage to fill the tanks, or ask/fill one yourself from atmospherics.
# Insert each plasma tank into a radiation collector [[File:Radiation Collector.gif]], then turn each on by clicking it with an empty hand. Lock them with your ID card when you are done.
# It's worth pointing out that you may have to fill the tanks with extra plasma from a canister. Otherwise, the tanks will run out of plasma mid-shift and thus not produce power.
The engine is now ready to produce power.
==== Step Four: Start the Engine! ====
# '''Double-check to ensure the cooling loop is active, you don't want to have an active supermatter with a pump still set to 101kPa or the vents/scrubbers inactive!'''
# Align the reflectors so that the emitter beams are deflected towards the supermatter crystal.
# Head into the emitter chamber. It is on the right side of the picture above. Just click each emitter [[File:Emitter On.gif]] with an empty hand to turn them on. '''Don't stand in front of them unless you want some serious laser burns!'''
# Close the radiation shutters with the ''Radiation Shutters Control'' button (if available).
The supermatter is now generating power.
==== Final Step: Set Up the Power Storage Units (SMES) ====
# Go to the room in engineering with multiple SMES [[File:SMES_Turn_on.gif]].
# Set each of their target inputs to 200 kW and target outputs to 190 kW.
#:'''Why:''' This increases how much power they forward to the rest of the station. 10 kW will be used to keep the SMES fully charged for backup power.
=== Delta Station Irregularities ===
'''Delta Station''' setup follows the same philosophy, but the coolant loop is arranged somewhat differently. A much more detailed explanation is stated above.
The same rules apply:
# Enabling gas pumps not labeled bypass (or straight pipe every pump).
# Enable gas filters.
# Don't forget the last gas pump on the right side!
# Set the air alarm [[File:AirAlarm.png]].
# Add the plasma tanks [[File:Plasma tank.png]] to the radiation collectors [[File:Radiation Collector.gif]].
# Close the shutters at the switch.
# On Delta station, the reflectors [[File:Energy_reflector_double.png]] require being moved before being turned on emitters. You must unweld [[File:Welder.png]] then unwrench [[File:wrench.png]] them, then drag them into the proper position. Alt-clicking them changes rotation. A 90 degree angle will send a laser beam in a 90 degree angle, nothing too crazy. Optimal Settings are as follows: 225 for the left reflectors and 135 for the right reflectors
# Turn on the emitters!<br>
=== TEG-based SM Irregularities ===
Some stations, including ,pubbystation, and corgstation start off with a Thermo-electric generated (TEG). A supermatter crystal emits oxygen and plasma when hit with an emitter, and these are scrubbed out, burnt and fed into the hot side of the TEG. Note that you can also set up a TEG on all other stations provided there is a source of gas, preferably plasma(it has the highest heat absorbance).


[https://forums.beestation13.com/t/a-noobs-guide-to-the-dreaded-pubbysm-confirmed-working-july-7th-2021/ Read the PubbyStation SM setup guide here]


== Words of Warning ==
[https://forums.beestation13.com/t/a-noob-s-guide-to-the-dreaded-corgsm-confirmed-working-july-9th-2021/ Read the CorgStation SM setup guide here]
# The Supermatter is VERY DANGEROUS. Activating the Supermatter should be the last step in setting up any form of Supermatter based power! If you ordered it from cargo the crate should stay LOCKED AND SECURED until everything is ready.
 
# You require safety gear. A full radiation suit or radiation-proof hardsuit AND meson scanners.
'''Congratulations! The supermatter engine is set! Best bolt it so people so unauthorized personnel don't rush in.'''
# Most of "setting up the Supermatter" involves a gas loop that is designed to cool down the Supermatter chamber. While not required, please have some knowledge of gasses, or atmospheric properties.
== A Robust Setup ==
# Anything that bumps into the Supermatter is fundamentally annihilated. Don't touch it. This means weld, and ask the AI to bolt the door to the Supermatter .
This requires a bit more prepwork than the basic Safe Setup, but it pays off by being able to recover from disasters that would hopelessly delaminate other setups. Specifically, it can self-recover from completely voiding the SM chamber by using naturally generated Pluoxium as recovery coolant, and it's also possible (although maybe not advisable) to run at up to 96% CO2 without needing to upgrade the freezers or the heat-exchange pipes.
[[File:Robust_Meta_SM.png|400px|thumb|right|Robust Setup. Changes are in grey. Compare to Safe Setup picture above.]]
==== Step One: Gear Up ====
Get the same gear as usual. You may additionally want an ATMOS holofan projector if you are expanding the waste gas outlet, but that doesn't need to happen immediately.
==== Step Two: Prepare The Gas Loop ====
The image shows the setup for MetaStation; it is basically an extension of The Safe Setup and extends in natural ways on the other stations.
# Straight-pipe over everything that is a grey pipe in the picture. (This is generally former pumps.)
#:Why: For the same reasons as The Safe Setup. The pump right in front of the door is also straight-piped, making '''the entire loop a single pipenet''', allowing gas to flow directly from the scrubbers to the vents without any chance of clogging.
# Bypass the filter in front of the yellow canisters with layer adaptors.
#:Why: This is needed to connect everything as one pipenet. (You can also straight-pipe over the filter, if you don't intend to extract Plasma or Pluoxium from the SM.)
# Replace the pressure pumps in front of the N2 cannisters with volume pumps. Wrench both down so they are ready to be used. These are for emergencies only; by default we won't use them.
#:Why: Volume pumps pump much faster, and at higher pressures. They will also empty the tank, unlike straight-piping.
# Install two dedicated scrubbers in the SM chamber for waste gas, one on layer 4 next to the SM and one on layer 3 under the SM. '''DO NOT CLICK ON THE SM CRYSTAL TO PLACE ANYTHING!''' You have to alt-click the tile, and select the floor from the list, in order to safely construct the scrubber with your RPD. Same goes if you mess up and need to unwrench/deconstruct it. The layer adaptor is placed in the plasma window.
#:Why: Having dedicated waste-gas scrubbers provides a clog-free way to filter the gas, and is also more versatile. The only downside is that it is easier to sabotage everything via the Air Alarm.
# Optional: For safety, replace the 3 vents in the SM chamber with injectors.
#:Why: They perform the same, but they can't be controlled from the Air Alarm, which makes them much more resistant to tampering. However, replacing these is somewhat time-consuming (remember to turn them off before they can be removed), and it can only be done before the SM is started.
# Optional: For safety, add additional injectors to the waste gas output. Put the other injectors on layers 2 and 4, and deconstruct the window both for materials and to make room. With good use of the holofan projector, you can set all of it up from inside the station, without a hardsuit. Switch the regular pipe for the layer adaptor as the last change.
#:Why: This has no effect during "standard" running conditions, but it can make all the difference during a fire, when the waste gas line gets clogged on the output. On maps like Meta that only have one Injector, this is ''highly'' recommended. However, it's very time-consuming, and it can be done while the SM is running, so you can put this off until after everything else.
==== Step Three: Configure the Air Alarm ====
# Set both freezers to "cooling", at their minimum temperature, and turn them on.
#:Why: Even though un-upgraded freezers only go down to 73K, and thus will ''warm'' the coolant in some circumstances, in fires their huge cooling power makes an enormous difference. It's better to be prepared for disaster, than to be a few degrees colder in a situation where it doesn't matter.
# Ensure the SM monitor is running before you mess with the Air Alarm!
#:Why: There's a bunch of things that can go wrong if you missed a pipe or a pump, and if you don't notice quickly the SM will probably delaminate.
# If you didn't replace the vents, disable the regulators on all 3 vents. Otherwise, there should be nothing in the ''Vent Controls'' menu.
#:Why: This vents at the fastest rate. (Faster even than "Internal 0.")
# Set the last two scrubbers to Expanded Range and scrub everything *but* N2, CO2 and Pluoxium.
#:Why: These are the waste-gas scrubbers, and everything that you're not keeping should be disposed of ASAP.
# Set the first three scrubbers to Expanded Range and scrub (only) N2, CO2 and Pluoxium.
#:Why: These are the gasses for the cooling loop. N2 and Pluoxium are both good, safe cooling gases. CO2 is not, but in case of fire it will rapidly form Pluoxium, which we will want more of. It also won't be created ''unless'' there's a fire, or you're adding it yourself. So it's best to keep it around.
At this point the monitor should show only N2, at a pressure that is decreasing but proportional to temperature. If it seems like all the N2 is being sucked out, turn off the scrubbers and/or check your gas meters! Definitely don't let the SM chamber become a vacuum, that's a one-way ticket if everything isn't already set up properly.


== Mechanics ==
If everything looks good, you can let the engine chill while you set up the rad collectors as usual.
==== Step Four: Start the Engine! ====
You can start the engine in the normal way, of course. But because of its robustness, there are a couple of additional options you can use in case of a complete power outage. If you have to resort to these, you should use wirecutters to cut power to the rest of the station, so that Engineering will get a chance to recharge first.
# Wire the solars.
#:Why: This is the safe, sane solution. So of course we won't do that.
# Get Atmos to deliver CO2 and set the intake pump to 50-300kPa.
#:Why: An engine running on CO2 will self-start. At high enough mole concentrations and CO2 percentage of 95-96%, the engine stabilizes around 4500 power without any emitters being active. At lower pressures that don't trigger CO2's power cascade, it will still self-start, but in the 1000-1200 power range, and be much safer to work with.
# Deliberately void the engine by setting the scrubbers to scrub N2 until it catches fire.
#:Why: If you've upgraded the number of outlets, the engine ''can'' self-recover from this before it delaminates, although it will get ugly. Dumping emergency N2 in via the volume pumps will cut this cycle short and make this a not completely awful idea. If you have controlable vents, you can turn off the vents so that the N2 is merely backed up instead of vented; in this case when you turn the vents back on you should be able to recover before integrity gets below 90%. In all cases, the boost of power hopefully is enough to let you run the emitters normally in the future.
== A Deeper Look: Mechanics ==
The supermatter is an extremely unstable crystal with particular properties. Here's how it behaves:
The supermatter is an extremely unstable crystal with particular properties. Here's how it behaves:
=== Power ===
=== Power ===
The crystal's power determines how much energy is produced each tick, and also the range and amount of radiation and hallucinations generated. (a 'tick' usually takes around 1-5 seconds depending on lag)
The crystal's power determines how much energy is produced for each tick, and also the range and amount of radiation and hallucinations generated. (a 'tick' usually takes around 1-5 seconds depending on lag)
 
* Power decays over time.
* Power decays over time.
* Hitting the crystal with a non-physical bullet (usually emitters) will increase its power.
* Hitting the crystal with a non-physical bullet (usually emitters) will increase its power. When hit by a "bullet" it increases power by the damage dealt multiplied by two.
* Power is increased every tick depending on the gas mix. This scales with the gas' temperature.
* Power is increased every tick depending on the gas mix. This scales with the gas' temperature.
* Consuming an object or mob will increase the power by a significant amount, independently from the object's size.
* Consuming an object or mob will increase the power by a significant amount, independently from the object's size.
* Power decay can be lowered or even completely prevented with CO2.
* Power decay can be lowered or even completely prevented with CO<sub>2</sub>.
* Too much power will result in dangerous sideeffects, like arcs of lightning or anomalies.
* Too much power will result in dangerous side effects, like arcs of lightning or anomalies.
===Instability===
The crystal must be kept stable if you don't want it to explode.
*Stability will not change by itself.
*The crystal grows unstable if the gas mix is hotter than 310K and stabilize if below.
*Physical bullets will destabilize the crystal, depending on the damage they do.
*Large amounts of power will destabilize the crystal. The highest safe limit of the supermatter is 5000 EER/cm³.
*Large amounts of moles will not only destabilize the crystal but also prevent the stabilizing effect of cold gases. This effect starts at about 12000 moles of any gas on the supermatter's tile.
===Gas Interactions===
Each gas has a different effect when it surrounds the supermatter crystal. The strength of each effect depends on the percentage of it in the gasmix in the supermatter chamber.


=== Instability ===
<s>[[File:Pluoxium.png]][[Guide to Atmospherics#Pluoxium|Pluoxium]]
The crystal must be kept stable if you don't want it to explode.
'''Safety: Pillow Fort'''</s>


* Stability does not change by itself.
<s>Pluoxium is like a weaker N<sub>2</sub>O without any of the risks. At 15% of the total gas or higher, it will lower the heat production of the Supermatter slightly less than N<sub>2</sub>, and increase the heat resistance by half that of N<sub>2</sub>O. However unlike N<sub>2</sub>O it does not decay, making it the perfect emergency gas if you can get enough. Pluoxium has the side effect of reducing radiation relative to its ratio in the mix, causing lowered power output at high concentrations.</s>
* The crystal grows unstable if the gas mix is hotter than 310K. It will instead stabilize when it is cooler than 310K.
* Physical bullets will destabilize the crystal, depending on the damage they do.
* Large amounts of power will destabilize the crystal.
* Large amounts of moles will not only destabilize the crystal but also prevent the stabilizing effect of cold gases.


=== Gas Interactions ===
Each gas has a different effect when it surrounds the supermatter crystal. The strenght of each effect depends on the percentage of it in the gasmix in the supermatter chamber.


[[File:Freon_canister.png]]<s>Freon
[[File:N2_Canister.png]][[Guide to Atmospherics#N2|N<sub>2</sub>]]
'''Safety: Extremely safe'''
'''Safety: Very Safe'''


Freon is a good emergency gas. It cools down all other gases in the loop and slowly dissipates away into nothing.<br>
N<sub>2</sub> is, in a large majority of situations, the safest gas to dump into the cooling loop. It actively lowers the temperature and the amount of waste gases that the supermatter crystal produces. A side effect of the safety it provides is that it also reduces power output of the engine. Precooled N<sub>2</sub> is good to have around for emergencies. Straight piped default setup with three emitters should generate around 65 kW per rad. collector.
It is not suitable for producing power though, because it severely lowers the power transmission rate.</s>


As of 10-27-17, Freon has been removed.
[[File:N2O_Canister.png]][[Guide to Atmospherics#N2O|N<sub>2</sub>O]]
'''Safety: Risky'''


[[File:N2_Canister.png]]N<sub>2</sub>
N<sub>2</sub>O reinforces the heat resistance of the supermatter crystal, allowing for much hotter setups than usual. '''However''', at higher temperatures (such as during a heat delamination) it will decay into O<sub>2</sub> and N<sub>2</sub>. While N<sub>2</sub> is good for the supermatter, O<sub>2</sub> most certainly is not. This O<sub>2</sub> will also react with the Plasma to create Tritium and then, to the further horror of many an Engineer, a Tritium fire. At lower temperatures and in more controlled setups, it can also combine with Plasma to create low amounts of BZ inside the loop.<br>
'''Safety: Very Safe'''
Marked as risky only to stop you from throwing N<sub>2</sub>O into the SM mindlessly. Yes, ''you''.


N2 is a good safety gas. It actively lowers the temperature and the amount of waste gases that the supermatter crystal produces.<br>
[[File:CO2_Canister.png]][[Guide to Atmospherics#CO2|CO<sub>2</sub>]]
Precooled N2 is good to have around for emergencies.
'''Safety: Very Risky'''


[[File:N2O_Canister.png]]N<sub>2</sub>O
CO<sub>2</sub> is a potentially dangerous yet very rewarding gas - in concentrations below 60% CO<sub>2</sub> your safe while on a normal loop, it will increase the crystal's power generation and can be used to produce Pluoxium as well.<br>
'''Safety: Safe'''
In high concentrations (above 60% CO<sub>2</sub>), however, it will raise the crystal's energy to extremely high levels. If you take precaution and upgrade the loop to with 3 layer space cool loop and freezers at Tier 4 parts you will be safe between 60% to 92%, this is a phenomenal way to generate power.


N2O reinforces the heat resistance of the supermatter crystal, allowing for much hotter setups than usual.
With poor management and insufficient or downright bad preparation(or [[Traitor|perhaps good preparation from certain points of view]]), it will eventually exceed safe energy levels and begin a charge delamination past 5000MeV, producing electric arcs and anomalies until it eventually explodes into a [[Tesla]] ball. This is however the premium SM gas.<br>
[[File:O2_Canister.png]][[Guide to Atmospherics#O2|O<sub>2</sub>]]
'''Safety: Relatively Dangerous'''


[[File:O2_Canister.png]]O<sub>2</sub>
Oxygen provides a boost to power transmission without actively increasing the waste gas amount or temperature.<br>
Pretty risky to use, as any disruption of the cooling loop will soon cause a plasma fire in the crystal chamber. Even just a high concentration of O<sub>2</sub> will activate and continuously power the crystal.<br>
If you're badass enough to run an O<sub>2</sub> setup: Always precool it before flooding the Supermatter chamber.<br>
[[File:BZ_canister.png]][[Guide to Atmospherics#BZ|BZ]]
'''Safety: Dangerous'''
'''Safety: Dangerous'''


Oxygen is the gas with the best power/danger ratio. It provides a boost to power transmission without actively increasing the waste gas amount or temperature.<br>
BZ increases the heat produced by the supermatter, as well as the radiation. Higher concentrations increase the radiation production up to 5 fold, but will become difficult to manage without significant set up. BZ also has the side effect of lower the power the radiation from the Supermatter grants, meaning while the produced rads increase 5 fold, the power does not. At a 40% of the mix, the Supermatter will start to fire irradiating nuclear particles. Don't get hit by these, regardless of your clothing.
Pretty risky to use, as any disruption of the cooling loop will soon cause a plasma fire in the crystal chamber. Even just a high concentration of O2 will activate and continuously power the crystal.<br>
 
If you're badass enough to run an O2 setup: Always precool it before flooding the Supermatter chamber.<br>


[[File:Plasma_Canister.png]][[Plasma]]
[[File:Plasma_Canister.png]][[Plasma]]
'''Safety: Very dangerous'''
'''Safety: Very dangerous'''


Plasma is very similar to Oxygen but provides a much higher power boost and waste and heat penalty. The extreme pressures and volumes of gas produced by this gas are very likely to clog pipes.<br>  
Plasma is very similar to Oxygen but provides a much higher power boost as well as waste and heat penalty. The extreme pressures and volumes of gas produced by this gas are very likely to clog pipes.<br>
WARNING: The roundstart setup can not handle pure plasma setups.
WARNING: The roundstart setup cannot handle pure plasma setups.


[[File:CO2_Canister.png]]CO<sub>2</sub>
[[File:Tritium.png]][[Guide to Atmospherics#Tritium|Tritium]]
'''Safety: Oh shit what are you doing'''
'''Safety: OH GOD OH F*CK'''


CO2 is a very dangerous gas - it can raise the power generation to infinitely high levels. This will cause catastrophic side effects long before delamination.<br>
Tritium increases the radiation production of the Supermatter by up to 3 times, without BZ's downside of lowering energy production. There is one slight issue with it.
In low concentrations, it doesn't do much but after a certain threshold is passed, it will slowly stabilize the internal crystal charge reactions and reduce the amount of power that the crystal loses every second.


=== Gas Production ===
Tritium is dangerous. Tritium is very dangerous. Tritium makes Plasma seem safe. Even with extremely robust cooling systems, Tritium is a horrifyingly irritable and jumpy gas. While it isn't as harmful to the heat level as Plasma is (just barely), it also has the second worst heat capacity of all gasses while Plasma has the second highest. This means that Plasma can be kept happy with enough cooling, whereas Tritium eagerly goes from a safe space loop into a burning hellfire. Add to this the byproduct of large amounts of Oxygen production (not exclusive to Tritium. An issue in a Plasma engine too), and you have a tritium fire and a very hot crystal. Do not use this gas unless you have a very strong understanding of atmospherics and the Supermatter, and are willing to get creative. What ever cooling method that works on a Co2 SM will need to be tripled for tritium.
===Gas Production===
The crystal produces plasma and oxygen while it's active.
The crystal produces plasma and oxygen while it's active.
*Plasma and Oxygen burn if they're hot enough. This will heavily increase the temperature and reduce the oxygen percentage; if not kept under control this can end up destabilizing the crystal.
*The amount and temperature of the produced gas are determined by the current crystal power.
*The amount of oxygen is proportional to the temperature of the absorbed gases. Very cold gas input will result in very little oxygen.
===Irradiation===
The crystal will affect nearby mobs while it's active.
*The range and power are determined by the current power. Being further away from the crystal also mitigates the effect.
*The crystal will cause hallucinations to nearby mobs if they're not wearing meson scanners or equivalents.
*The crystal will irradiate nearby mobs. A radsuit or other protective clothing can negate this effect. IPCs are immune to this effect, but will still be irridated.
===Consuming===
Anything that touches the crystal will be consumed and turned into dust. No exceptions. The only way to "safely" transport a shard is to pull it, being careful to not be pushed back into it by someone else.
===Collapsing===
If the crystal reaches 100% instability, it will delaminate. There are several different events that may happen when the crystal delaminates and they all depend on the state of the crystal during delamination.
*A crystal in a heavily pressurized gas environment with large amounts of moles will always collapse into a singularity.
*A crystal that has excessive amounts of power stored inside it will cause an explosion and release several tesla energy balls.
*A crystal that is neither heavily overpressurized or overcharged to meet the prior criterium will simply explode, with several factors including its power amount or pressurization contributing to the resulting explosion size.
==Beyond the Safety: Improving the Power Output and Endangering Crew==
Here are some pointers and hints on how to get more power out of this engine:
*Coordinate with other engineers. Don't just silently adjust gases and pumps or you might end up causing accidents or decreasing efficiency.
*Higher temperatures generate more energy.
*Higher amounts of oxygen moles result in more power.
*You can pump gas from the atmos mixing loop directly into the engine by using the orange pipe.
*The supermatter crystal will glow in a distinct orange color if the gas composition and pressure levels in the chamber are ideal. This will reduce the impact of heat on the generation of power.
*Consider setting the first filter of the loop to plasma. The supermatter produces plasma, which can be collected and used to refill the radiation collectors if the round goes on for too long.
*The gas loop isn't that efficient at roundstart! Consider tuning it to run better by adding better cooling or improving the current loop efficiency.
*Gasses leaving the SM go straight to the heat exchangers then to the filters, this means you cool all your gasses and then remove gasses. If you filter first you can get improved cooling (since you don't waste energy cooling unused gas) allowing for more dangerous gasses to be used easier.
*Plasma is terrible inside of the SM, potentially worse than Carbon Dioxide. Despite being terrible inside the chamber, it is incredible for its heat .
*Producing loads of power sounds great, but as soon as you go over 5000 MeV/cm³ anomalies will start forming rapidly and the SM will likely delaminate.
*You can place 2 heat exchange pipes on one tile as long as one is horizontal and one is vertical, double the cooling power!
<br>
''' But I don't want to experiment! '''<br>
#Grab N<sub>2</sub>O canisters from atmospherics
#Set one of the filters to allow N<sub>2</sub>O
#Wrench the N<sub>2</sub>O canister into place
#???
#Profit
OR
#Add more reflectors
#Add more emitters
#???
#Profit
==Troubleshooting AKA Oh god it's on fire what do I do!?==
[[File:SM DEFLAM.png|alt=Supermatter Sabotage|right|500x500px]]
The supermatter's in trouble! You should be able to locate where the issue is from the screenshot alone. [https://tgstation13.org/wiki//images/9/9a/Smproblemsolution.gif Here's the answer.]
===Handy Guide To SM Repair===
Inspect the gas loop to confirm it is intact and operational.<br>
Check the [[File:Meter.png]]meters to quickly ascertain where a problem may lie.<br>
'''If any of the meters report an unusually high or low amount of gas, then you're close to finding the issue!'''
Common gas loop failures include:
*Gas pumps are OFF or left on the wrong pressure (Crank them up to 4500kpa!).
*Gas filters are OFF or set to the wrong gas. '''Remember!''' Filters do not allow ANY gas to pass through if they're turned off! If you don't wish to filter anything, leave them online but set to filter nothing.
*Part of the coolant loop has been broken or unwrenched. You must don a space-worthy suit and go fix it! This may mean wrenching it back or recreating it with your RPD [[File:Rpd.png]].
*Supermatter chamber air alarm [[File:AirAlarm.png]] has the vents improperly configured. Set them to internal, turn off external, make sure ON is toggled.
*Supermatter chamber scrubbers not siphoning or turned off. Set to siphoning, expanded range, and ON.
*One of the pipes has been broken or unwrenched. You can easily put it back in place with a wrench [[File:Wrench.png]] or recreate it with your RPD.
*Too much gas for standard setup! Remember that gas pumps are the lowest tier for circulation. If a section has too high of a pressure, the pumps cannot push anything more into it! This will cause a slow delamination.
*Too little gas! The more (cold) gas there is, the faster the gas will be able to siphon heat away from the crystal. A supermatter crystal in near-vacuum is just looking for an excuse to overheat.
*One or all of the tiles around the crystal is missing! This will siphon gases directly into space. Make sure they're built, replace any piping that might have existed there.
*The tile under the crystal is missing! Get and Rapid Constructor and place a tile with alt+click! '''Do not touch it with a normal click'''
*Did you set one of the air filters to N<sub>2</sub>O, as stated earlier in the guide? Bringing a container of N<sub>2</sub>O [[File:N2O_Canister.png]] from atmospherics can extinguish flames inside the chamber without needing to risk firefighting. It also increases the power output of the SM!
==Sabotaging the Supermatter==
Want to sabotage the crystal but can't figure out how to pull it off? Here are some pointers and hints:
===General hints===
*You can break the APC of the room to stop all pipes and scrubbers from working.
*Cut cameras near the engine.
*Straight piping the supermatter coolant loop greatly increases the rate of delamination. It can also be saved easier, so ensure it is not corrected fast. A non-robust engineering department is doomed.
*Instead of turning off pumps and filters, you can just set them to extremely low values instead. They'll still appear to be working.
*Taking out all the engineers before attempting a delamination helps a lot.
*Opening a canister of plasma in engineering and igniting it will make it a lot harder for people to fix your sabotage. Even more effective if the radiation levels are high.
*Keep a flash or EMP on hand. The AI and its borgs are pretty much guaranteed to try and intervene to prevent harm.
*Stay around and pretend to be helping so you can undo all the repair attempts by other people.
*With a little bit of tinkering, you can sabotage the station's distribution loop with any of the multitude of harmful waste gases produced.
===Regular delamination===
These are the easiest to pull off and require no special conditions. You can cause a normal delamination by:
*Turning down or turning off gas pumps
*Turning off or changing the gas on a gas filter
*Unwrenching any pipe. '''Note:''' This will release all gases stored in said pipe (bad if plasma or superheated gas).
*Shooting guns at the crystal is extremely effective, but it's likely that you'll end up in the blast.
*Disabling the scrubbers or vents in the air alarm.
*Adding a very harmful gas like plasma, but make sure you have the gas filters set to allow it in circulation first.
*If you plan to delaminate the supermatter, consider cutting telecommunications or edit it so it filters Engineering out. They wont hear the warnings until it is too late...
*'''Stealth sabotage:''' Unwrench a portion of the space loop. Generally, no one looks in space to correct this, and it is not obvious a piece is not connected.
===Overcharged delamination===
This kind of delamination requires careful gas management but is faster, far more destructive and there's a good chance it will irradiate, burn and shock the engineers who are trying to fix it.
#Wear as much radiation protection as you can. Hide or destroy the rest.
#Wear insulated gloves so you are not shocked by arcs. Destroy any other gloves remaining.
#Shut off all cameras.
#Keep the emitters online and firing. Add extra emitters if possible. You can swipe an ID to lock them(which even the AI is unable to bypass), but the wires can still be cut.
#Break into atmos and configure pure CO<sub>2</sub> to be sent to the engine coolant loop. A better way of doing this removing the pipe into atmos from space and rerouting it that so it cannot be turned off.
#(Optional) Deal with tcomms through destruction, depowering, or filtering out the Engineering Radio Channel.
#Now to start the delamination. Set all air filters to CO<sub>2</sub>.
#If needed, enable the pipe of CO<sub>2</sub> from atmos you configured earlier.
#Access the air alarm and turn off scrubbers. Pump as much CO<sub>2</sub> into the chamber as possible.
#Sabotage entry to the room, and/or release plasma in the room around the SM chamber.
#The anomalies, gravity pulses and lightning arcs will quickly turn the engine room into a deathtrap. Make sure you have everything set up correctly before this starts happening.
#The engine will start broadcasting obvious and dire messages that something is very wrong over common radio frequencies. If comms are down, this is not a problem. '''Note:''' People carrying laptops can still see the engine status.
#Stick around only long enough to ensure that it is not stopped.
#''<u>Embrace the energetic god</u>''
===Critical mass delamination===
A critical mass delam is one of the more difficult methods. It takes longer and there is a chance it reverts to an overcharged delamination. It follows the steps of the previous delamination, but instead we will be pumping plasma from atmospherics. The goal is to have as much gases selected at the filters.
#Get the gear.
#Straight pipe the system.
#Cut the cameras.
#Select four different harmful gases - Oxygen, Plasma, Tritium, CO<sub>2</sub>. Alternatively if you immediately start pumping N2 from atmospherics to the SM at the start of the round it will delaminate within 12 minutes.
#Disable the scrubbers from the air alarm OR unwrench part of the pipe leading out.
#Sabotage the room.
#Stay close until it's too late to save.
#Run like hell.
#'''The Lord arrives'''
==Cold gas, a glowy crystal, some lasers, and you: A deeper dive into the Supermatter Engine==
'''This is very rambly, but useful information will be given throughout. It's recommended to read it all, as it covers critical aspects of atmospherics functionality and, thus, the Supermatter. But if you just want the conclusion on a whole lot of theory, skim read the bulk of it but pay attention at the end.'''
===The basics of gas. Rule 0 of atmospherics and the Supermatter===
First things first, and extremely importantly: gas does not work like you think it does.
A common, and reasonable, misconception is that gas flows. In atmospherics, gas does not move from one pipe to another. Instead, gas “Exists omnipresently within a pipenetwork”. What this means is that gas within a pipenetwork (commonly referred to as just a pipenet) exists in perfect equilibrium of both gas and temperature. If you have a pipenetwork from one end of the universe to the other, and added let’s say 1 mole of oxygen, then there would immediately be gas at the other end of the universe. Every single pipe would have the exact same gas, at the exact same pressure, at the exact same temperature. Say we then add some N<sub>2</sub>O, then the exact same thing would happen. The gas, mixed perfectly with the oxygen, across every single pipe.


* Plasma and Oxygen burn if they're hot enough. This will heavily increase the temperature and reduce the oxygen percentage; if not kept under control this can end up destabilizing the crystal.
'''tldr; gas behaves more like electricity moving across wires(I.E. instantly) than IRL gases'''
* The amount and temperature of the produced gas is determined by the current crystal power.
* The amount of oxygen is proportional to the temperature of the absorbed gases. Very cold gas input will result in very little oxygen.


=== Irradiation ===
Now it’s important to clarify what exactly a pipenetwork is. A pipenetwork is any connection of pipes wherein a pipe can be traced to another pipe via at least 1 pipe. So it doesn’t matter how many pumps you have between your pipes if even 1 length of pipes can be traced around those pumps. At which point, it’s part of the same pipenetwork, and the pump is irrelevant.
The crystal will affect nearby mobs while it's active.
 
This might sound a little weird. To clarify, don’t think of pipes like a method of transport. Nothing travels through pipes. Think of pipes like a container for gas.
 
For this, I like to use the basin analogy. Imagine you have 3 things: A basin or bucket or something similar, a cup, and some liquid. The pipes are the basin, the cups are the pumps, and the liquid is the gas. If you add something into the basin, it doesn’t travel in a direction towards the next area, it simply enters equilibrium with the rest of the contents (please ignore brownian motion for this analogy. If you don’t know what this is, good, it’s not helpful here). If you want to move something from one basin to another, you dip a cup in and pour it into the next basin. That’s how pumps work. They, like the cup, move the contents from one container to another in bulk loads.
 
Call back to what I said about pipenetworks and pumps a moment ago. Having a pump inside of a pipenetwork is like using your cup to take out of the basin and pour back into it. It accomplishes nothing, because the contents aren’t changing.
 
So with this in mind, how does clogging occur?
 
 
===A horror story of pumps and hot gas===
Pipes do not clog, period. Filters clog, pumps clog, scrubbers clog, vents can clog (depending on settings). But pipes, however, do not. There is no upper limit on the pressure of pipes. A pipe, in theory, can store infinite pressure and, thus, infinite gas.
 
However, there is an upper limit on what pressure pumps, filters, and scrubbers can get into pipes. This may sound similar, but it has large consequences.
 
For example, a pressure pump has a maximum pressure of 4500 kPa. That means that every time it pumps gas, it can move up to but no more than 4500 kPa of that gas. It also means that if the pressure of the pipenetwork it’s pumping into is equal to or greater than that value, it will be unable to move the gas. This is referred to as a pump becoming backed up or clogged.
[[File:Supermatterboxnew_pipenet.png|650px|right]]
To the right you'll find an image used earlier in this guide, but it is updated to show the separate pipenetworks the roundstart Supermatter has on Box station. Each of these pipenetworks is separate, but are in perfect equilibrium within themselves. So if you checked the gas in the green pipenetwork, it doesn’t matter where you checked, it would display the same. Likewise, the blue pipenet may be different than the green pipenet. But everywhere in the blue pipenetwork you check would, again, be identical to anywhere else in the blue pipenetwork.
 
But dear Mr. Guide Writer, why does this matter, at all? Why show me just how many pipenetworks exist in the round start setup, what does it matter? Two reasons.
*Pumps, filters, and mixers do not efficiently pump connected pipenetworks at all.
*Gas. as mentioned earlier, is always evenly spread through a pipenetwork and without direction to it. (“Gas exists omnipresently within a pipenetwork”)
Let's start with the first thing, pumps. All types of pumps (not filters and mixers and the like) have 200L volume in the small bit of pipe before them, and 200L in the small bit of pipe after them. As such, a volume pump pumps all the gas that is in that node to the other side of the pump, per second (the maximum pump rate for volume pumps is 200L/s). As such, if a pipe network has 2000L of volume, connected to a volume pump that is pumping at its max rate, it will pump 1/10th of all gas in the network, per second. However, you also have to take into account that it's always 1/10th of the gas that is in the pipes, as such, pumps will pump less moles of gas per second as there is less and less gas in the network before the pump.
 
Put simply, pumps exist to restrict and direct gas by their very nature. If you need to move gas from one place to another quickly, adding a pump will only slow it down. Starting to see where this is going? Well, there’s another reason pumps are bad, and it ties back in to the previous section.
 
Pumps have an upper-pressure limit, same for filters and mixers. For the gas pump, and the others, the pressure limit is plain to see, 4500 kPa. However, the volume pump also has a pressure limit, rated at 9000 kPa. Scrubbers in fact also have a pressure limit, sitting around 5200 kPa.  


* The range and power is determined by the current power. Being further away from the crystal also mitigates the effect.
Gas pumps and mixers are especially poor, as their pumping slows down the closer they get to their pressure limit.  
* The crystal will cause hallucinations to nearby mobs if they're not wearing meson scanners or equivalents.
* The crystal will irradiate nearby mobs. A radsuit or other protective clothing can negate this effect.


=== Consuming ===
What does this mean for the Supermatter, especially in case of delamination? Well, the room is probably on fire, so the gas has expanded, which in turn makes it far more pressurized. The knock-on effect? Follow along with the image to the right. We’re starting at the left side of the central Supermatter chamber. The yellow pipenet before the red.
Anything that touches the crystal will be consumed and turned into dust. No exceptions. The only way to "safely" transport a shard is to pull it, being careful to not be pushed back into it by someone else.
*Yellow: First, the scrubbers work their butt off to get to their pressure limit. The gas is hot, so that doesn't take very much.


=== Collapsing ===
*Red: While this happens, a gas pump takes the tiny amount of moles in the pipenetwork the scrubbers are connected to and shoves a small amount of it into the pipenetwork beyond it. Slowing down even further, as the gas is so hot it easily reaches the pressure limit.
If the crystal reaches 100% instability, it will delaminate. There are several different events that may happen when the crystal delaminates and they all depend on the state of the crystal during delamination.


* A crystal in a heavily pressurized gas environment with large amounts of moles will always collapse into a singularity.
*Blue: This then reaches the filter, which again tries to pump the small amount of moles beyond it, with another case of pressure limit slowness and the fact, not all gas is available for pumping at any moment.
* A crystal that has excessive amounts of power stored inside it will cause an explosion and release several tesla energy balls.
Repeat the above for all the following pumps. Add to this the fact that the Supermatter produces plasma and oxygen, which are reacting with each other and burning in the pipes, likely pushing the pressure above the limits of what the pumps can handle and... well you got the point right? That’s what happening to your pumps every single time the Supermatter ignites.
* A crystal that is neither heavily overpressurized or overcharged will simply explode.


== Box- and MetaStation Setup ==
Well, that all sounded horrid, how can we prevent this?
The supermatter engine on Box and Meta can be set up in many different ways and experienced engineers are encouraged to experiment. The less experienced engineers can refer to the safe guide below.


=== The safe setup ===
===How removing pumps made me a billionaire===
This is a simple setup, easy to maintain, will almost always last the entire round, and almost always generates enough power for the entire station.
The title gives it away, really. You want to replace most pumps you can find with either straight pipes, or with valves to allow for easier modification and changing where the gas goes on the fly. '''ESPECIALLY THE FILTERS NEED TO EITHER BE REMOVED OR UTILISED PROPERLY IN THE CASE OF A DELAMINATION OR WHEN OPTIMISING.'''


There is a video setup guide [https://www.youtube.com/watch?v=Avec0T2-Xhk here.]
Now, to explain why this is the proper option in most cases. As mentioned continuously, gas in a network is always evenly spread through all connected pipe. it's always the same ratio of gasses, it's always the same temperature. It’s always in perfect equilibrium in every sense of the word.


==== Step one: Safety ====
If you’ve been following along, then you likely know what this means. By replacing all the pumps up to the space loop with pipes, clogging is no longer an issue. The gas will leave the supermatter and immediately be cooled by space. No delay, no travelling, because the pipe connected to the scrubber holds the exact same amount, temperature, etc as any of the pipes in the space loop (marked as Green)
# Put on an optical meson scanner [[File:MGlasses.png]] (Engineering scanner goggles [[File:EngiScanners.png]] work too, if changed to meson mode) and a radiation suit [[File:RadiationSuit.png]][[File:RadiationSuitHood.png]] (an engineering hardsuit works too) in case someone prematurely activates the supermatter crystal.
#:'''Why:''' Meson Scanners protect from hallucinations, while the suit protect from radiation. Once the engine starts, it will start emitting both.
[[File:Supermatterboxnew.png|right]]
[[File:Supermattermetanew.png|right]]


==== Step two: Prepare the gas loop ====
But, why stop there? You already know that gas doesn’t travel inside of pipenetworks, so these other two pumps (Blue to Red | Green to Red) aren’t actually assisting in cooling after all* (There will be a small note at the end of this section) so why not simply replace them with pipes? Well, that has an added bonus. In a standard setup, or any setup which stops gas flowing from Blue to Red, the only connection between the gas return filters (Green circled filters at the bottom) is the heat exchange pipes in the space loop. If somewhere were to cut one, then the gas could no longer reach the return filters. Eventually the supermatter would run out of coolant, and a delam would begin.
# Your first step should be wrenching the N2 canisters in place. Then start turning pipes on or off according to the picture on the right. Red circled pumps should be set on and to max pressure. Turn the ones without a circle in the image off.
#:'''Why:''' When the crystal is generating power it also makes toxic gases and heats up the air surrounding it immensely, thus it needs to be properly ventilated. We start by making the gas loop push N2 counter-clockwise around the loop, cooling it on the left side with the coldness of space before re-entering the engine room again from the right side.
# Make sure that the top filter (green circle) is set on, filtering "None" with max pressure. Set the bottom filters to filter (from left to right) "N2", "None", "None" and a bunch of other gases. Turn them all on and set them to max pressure as well.
#:'''Why:'''  The bottom filters separate the gases produced by the supermatter crystal to keep the gasmix constant. There is a loss of oxygen this way, but it is safer. (The first filter could also be used to collect plasma from the output mix into the canisters.)
# Swipe your ID at the air alarm [[File:AirAlarm.png]] next to the crystal room and take a look inside the chamber. Open the air alarm menu and set the vents to 5000 kPa pressure and the scrubbers to '''siphon''' and expanded range. The scrubbers will show an animation if they are set up to siphon correctly.
#:'''Why:''' The air alarm controls the chamber's vents (which puts gas in on the right) and scrubbers (which take gas away on the left). This step makes sure they're active and gases are moving in the chamber as fast as possible.


With these all done, the nitrogen should be cycling through the system and getting nice and cool.
But, say those pumps were both turned into pipes. Well, then cutting a single pipe in the space loop would do next to nothing. We’d lose the gas from that one cut pipe, but the rest of the piping is still connected, and the engine continues safely. You won’t even notice the change.


==== Step three: Starting the radiation collectors ====
“Wait!” you may be thinking, “the pipes will leak!”
# Open the secure storage. You will need someone with access (CE, Captain, or ask the AI) to press the button in the CE office. This gives you access to the plasma canister. [[File:Plasma Canister.png]]
#:'''Alternative''': Swipe an engineering ID on the APC to unlock it. Turn the APC off. Use a crowbar on the blast door to force it open. Return to the APC and turn turn it back on, then swipe your ID to lock it again.
# Obtain six plasma tanks.[[File:Plasma tank.png]] One can be found by the radiation collectors, and up to ten more can be taken from the tank dispenser. [[File:Tank Dispenser.png]]
# Fill each plasma tank with the plasma canister. First, click the canister with a plasma tank in your active hand. Then open the canister menu and set the pressure to max. Double check to see if the tank was inserted correctly, then open the valve and close it after the tank has been filled. Eject the tank.
#:'''It's very important to only open the valve if a tank is inserted, or you'll be releasing a huge cloud of flammable, poisonous plasma in the air.'''
# Insert each plasma tank into a radiation collector [[File:Radiation Collector.gif]], then turn each on by clicking it with an empty hand. Lock them with your ID card when you are done.
#:'''Why:''' Radiation collectors produce the power from the crystal's radiation. They become much more efficient if the plasma tanks are packed to the brim.


The engine is now ready to produce power.
Thankfully, that makes far too much sense for atmospherics. Pipes don’t leak. At all. Now, the gas that was within that specific pipe will be expelled into the air, yes. But the gas from other pipes can and will not exit out of the newly made ‘opening’, if you can call it that.


==== Final step: Start the engine! ====
So that’s two very nice bonuses. Gas is immediately cooled, and the supermatter is harder to tamper with. It’d would be fine if that was all these changes gave us. There’s one more nice bonus, though.
# '''Double-check to ensure the cooling loop is active, you don't want to have an active supermatter with a pump still set to 101kPa or the vents/scrubbers inactive!'''
# Head into the emitter chamber. It is on the right side of the picture above. Just click each emitter [[File:Emitter On.gif]] with an empty hand to turn them on. '''Don't stand in front of them unless you want some serious laser burns!'''


Congratulations! The supermatter engine is set! You can now continue to set up the SMES so the power is provided to the rest of the station.
The volume of the pipenetwork is increased massively. Pumps, as we’ve discussed, have a pressure limit. The greater the number of pipes in front of a pump, the greater the volume that the pump perceives, and the more gas it can put in. Put simply, if you have a single pipe of 4500 kPa, a pressure pump cannot continue pumping. Add another pipe, and suddenly it’s 2250 kPa each, and the pressure pump will continue until both pipes are 4500 kPa. Every time a pipe is added, the ‘capacity’ increases. By replacing all these pumps with pipes you have changed a number of pipenetworks of only 10-20 each to a full pipenetwork of 50+. Suddenly the scrubbers don’t have to worry about pressure as much, especially on top of the instant cooling.


==== Beyond the safety ====
Lastly, though only vaguely related, keep your vents on internal 0, not on external 5000. Vents do not actually have a pressure limit at all. They can continue to add pressure constantly, however, they do work faster if the chamber they are connected to is lower pressure, and the gas they're pumping is cold, but this is always true. Essentially, vents pump a static amount of pressure when they're at maximum speed. If nothing very, very strange is happening, the gas that the vents are attempting to pump in is colder than what is in the chamber, as it already went through the cooling part of the pipes. As such, having the vents on internal 0, and with it, always pumping the hardest they can, they are adding gas that is colder than what is currently in the chamber itself. This contributes to the cooling down of the chamber, and is often enough to prevent a heat delamination by itself.
Here are some pointers and hints on how to get more power out of this engine:
* Coordinate with other engineers. Don't just silently adjust gases and pumps or you might end up causing accidents or decreasing efficiency.
* Higher temperatures generate more energy.
* Higher amounts of oxygen moles result in more power.
* You can pump gas from the atmos mixing loop directly into the engine by using the orange pipe.
* The supermatter crystal will glow in a distinct orange color if the gas composition and pressure levels in the chamber are ideal. This will reduce the impact of heat on the generation of power.
* Consider setting the first filter of the loop to plasma. The supermatter produces plasma, which can be collected and used to refill the radiation collectors if the round goes on for too long.
* The gas loop isn't that efficient at roundstart! Consider tuning it to run better by replacing some of the pumps with volume pumps or adding better cooling.


==== But I don't want to experiment! ====
External 5000 suffers from the same issues as a pump does, vents will completely stop pumping in gas when the room it is trying to pump into is 5000 kPa or above, which happens fairly quickly in a small room that is white hot. So remember, internal 0, unless there is too much gas in the room (see singularity delamination).


# Make sure the SMES has enough power stored to power the entire station for a couple of minutes
<nowiki>*</nowiki> ''The small note at the end of the section:'' You can consider placing restrictive pumps in certain areas so hot gas can't travel through quickly and give it more time to cool, though there are often better ways to do this that are less dangerous. Still, the option is there.
# Turn off the emitters
# Turn on the blue circled pump to max pressure, turn off the two pumps leading to the supermatter chamber
# Unwrench the N2 canisters, replace them with oyxgen canisters (steal these from atmospherics)
# Let the oyxgen run through the coolant loop for a couple of minutes (if the atmos techs haven't fucked off, you could ask them to cool the oxygen beforehand, since there's a space coolant loop in atmosia, but that happens once in a blue moon)
# Turn off the blue circled pump, turn on the two pumps leading to the supermatter chamber
# Congratulations, you've just made the supermatter more efficient!


Other ways you can make the supermatter generate more power include adding more emitters or ordering a supermatter shard from cargo and shoving it into the supermatter chamber (nothing can go wrong with that!)
===Breaking the laws of thermodynamics and a final word===
EDIT: Space is now 2.7K making it the best cooling solution at round start and equal to t4 freezers.


== Troubleshooting AKA Oh god it's on fire what do I do!? ==
Freezers. That is all. Freezers are magical machines that break the laws of thermodynamics by even existing and work to extremely quickly heat or cool gas to the temperature they are set at. They are much, much quicker than space could ever hope to be when upgraded, and even colder. Space, at its coldest, is about 26K. Freezers can go as low as 2.7K when fully upgraded, and are much quicker at cooling.
[[File:Supermatterproblem.png|500px|right|alt=Supermatter Sabotage]]
A word of warning, however. Freezers will attempt to change the temperature of the gas that is in them to the temperature it is set at, this seems obvious, but that also means it can heat gas. As space is around 26K, and unupgraded freezers only go to 73.15K. As the gas is returning from space, this will often serve the heat the gas. However, as 73.15K is still far cooler than any worrisome temperature for the Supermatter, it’s worth considering leaving them on depending on your setup. As during a delam, gas can return from the space loop still warmer than you’d like it, and it adds a second layer of security just in case. Especially if something… Unfortunate happens to the piping out there.


The supermatter's in trouble! You should be able to locate where the issue is from the screenshot alone. [https://tgstation13.org/wiki//images/9/9a/Smproblemsolution.gif Here's the answer.]
If you somehow read through all that, I very strongly applaud you, and I applaud you on likely becoming an engineer that is a few times less clueless. Despite all the things you now may know, there is a lot to experiment with, and lots of ways left to mess up in spectacular ways. Try to keep learning more and more as you go, and good luck in your attempts to not blow up the station.
[[Category:Guides]]
==How to cool your Supermatter to where it may become a problem==
===Your Tablet===
Normally, most people just throw this away at the start of the shift but your tablet has a program to monitor the SM. Its good practice to take out your tablet to immediately download the Supermatter Monitoring app at roundstart. Simply keep your tablet on this and in your pocket and you will <u>be able to constantly see</u> the monitor for the entire round, instead of having to go to a static computer every time you want to look at its status.
===Pressure vs. Volume===
Normally, your Supermatter is equipped with pressure pumps which max out at 4500 kPa, the problem is that they aren't that fast. In theory Volume pumps are just as fast, but they can pump until 9000 kPa. This means that in case of a heat delamination they can continue pumping even when normal gas pumps would already have given up. By replacing everything that uses pressure pumps to volume pumps you can make the cooling of your SM a lot faster.
===Pump Cleanup===
The even faster way to cool your SM is to remove all of your pumps except for the ones infront of the canisters and the atmos to loop pump and then replace all of your pumps with pipes after. Pipes have no upper pressure limit, so they will never get clogged. Another benefit of straight-piping is that gas is omnipresent within a pipenet, meaning that if you have no pumps between your scrubbers and the space loop your gas is going to get cooled immediately!
===The other layers===
A huge part of the SM is the speed you can get gasses from the scubbers to the vents, the first and third layer helps a ton with this. By setting all your things with layer adaptors behind them and a device for every layer you can make everything a lot faster.
[[File:Filtering with the Other Layers.png|right|356x356px]]
===Filtering with the other layers ===
Normally you get 4 filters all on the second layer, but these are useless and just slow down the unfiltered gasses. Instead of having one filter you're gonna need 3 filters with layer adaptors before them.  


===First and foremost===
Each filter normally filters at 200 L/s but with the layer adapators you're gonna get to 600 L/s, making your gas a lot faster since all filters can move the gas at the same time (Since gas is omnipresent within a pipenet) instead of moving it from one filter to the next.
Inspect the gas loop to confirm it is intact and operational.<br>
Check the [[File:Meter.png]]meters to quickly ascertain where a problem may lie.<br>
'''If any of the meters report an unusually high or low amount of gas, then you're close to finding the issue!'''


You are also gonna need two of these for the next cooling strategy, one for going into the cooling loop and one for going into the SM.
===Plasma Cooling===
Plasma may be seen as a gas that can heat up quickly and makes fires, but it can be used to cool down your SM way more. The reason for that is that Plasma has a very high [[Guide to Atmospherics#Physical Characteristics of Gases|heat capacity]] (200) compared to other gases (for example, Nitrogen has a heat capacity of 20). The higher the heat capacity, the more energy it takes to raise the temperature of the gas. So you could disconnect the space loop from the rest of the cooling loop, fill it with plasma and connect both loops with heat exchangers so the cold plasma cools down the gas inside the normal cooling loop.


Common gas loop failures include:
Plasma can keep a very cold temperature for a long time and if you filter it out of the SM into the cold loop and use it for further cooling you can keep your SM very cold.
* Gas pumps offline.
===Space cooling with the other layers===
* Gas pumps left on default pressure. (Crank them up to 4500kpa!)
Just what it sounds like, add 2 more layers to your space cooling and it provides a great boost to how cold your SM is.
* Gas filters offline. '''Remember! Filters do not allow ANY gas to pass through if they're turned off! If you don't wish to filter anything, leave them online but set to filter nothing'''
===Your Freezers===
* Gas filters left on default pressure.
The freezers you are given can be your savior but also your demise. The problem is unless you have upgraded their parts to T4 parts (the bluespace ones) <u>it will actually heat up</u> your gas instead of cooling it down. If you ever turn these on it will provide a great cooling boost but is not recommended below T4 parts or in an emergency.
* Supermatter chamber vents improperly configured.
===The useless Additions===
* Supermatter chamber scrubbers not siphoning.
The pump infront of the SM, the bypass pump. I don't even know why it exsists but you should always remove this and change the pipes from manifolds to normal pipes. Edit: I was told this was used so rather then pumping gas into the SM you could put it into the cold loop to keep gas colder, but I've never used this myself.
* Heat exchange pipes broken. Space dust can slip through the defenses on occasion. Or a traitor may detach a section.
* Too much gas! If a section has too high of pressure, the gas pumps cannot push anything more into it!


===Second===
The Filter to canister in the upper left corner of the cooling loop can be useful if you want to farm gases like Pluoxium with a CO<sub>2</sub> SM, but in most cases you should remove this and replace it with a normal pipe so your coolant isn't getting slowed down on the way to the space loop.  
If the gas temperature is too high to stabilize with the cooling loop alone - hope that Atmos have a canister of precooled N2 or even Hyper-Noblium around.


===Third===
However, you can also place a layer adaptor in front and after the filter and connect it with a straight pipe on another layer. Through that, the gas will not be slowed down because it can travel through the normal pipes, but you can also farm gases because the filter is still functional, meaning this setup has no real downsides.
If the supermatter is delaminating and the gas loop is operational, use an [[File:Analyzer.png]]analyzer to check for problem gases in the loop. Someone may have slipped in some carbon dioxide. Double-check the filters to see if they're getting rid of unwanted gases.
=== Passive venting===
Normally a SM has unary vents which if you set your air alarm up correctly will try to deplete its pipes to 0 kPa. Passive vents however link the atmosphere to the pipes, so the scrubbers will be scrubbing directly from the pipes and it will make gases going into the SM a lot faster. '''Be very careful when putting these into the SM room, one touch of the SM and you are dead. It is also recommended to put a holofan infront of the SM so gas isn't leaked. Also, this will cause your SM to lose gas because the gas goes into the pipes so make sure everything else is ready before putting these in.'''
===Scrubbing and cooling under the SM===
[[File:Under the Sm.png|right|477x477px]]
Putting things under the SM is dangerous, but if you want to cool it more this is the next step and recommended for setups that involve dangerous gases. By alt-clicking the SM you can view the floor under it and put pipes and devices under the SM. You're gonna need heat transfer pipes and scrubbers.
====The Scrubbers====
The scrubbers should not be scrubbing all the air but instead should be scrubbing all the O<sub>2</sub> so a fire doesn't start and heat up the SM a ton.
====The Heat Transfer Pipes====
By adding heat transfer pipes with plasma and freezers hooked up to them you can greatly cool the SM. But if you change these to heaters you can also greatly heat the SM, resulting in a delamination. The freezers have to be equipped with Tier 4 parts or they will be less efficient than space.
===The Anomalies===
{{main|Anomalies}}
Once reaching 5k MeV (More at 7k MeV, however 5k is the safe upper limit), 7000 Kelvin or enough pressure, anomalies will start appearing outside the SM. This is a big problem because of their affects:


===And lastly===
'''The easiest way to prevent anomalies from causing harm in engineering is completely removing all floor tiles leaving the cold space surrounding the SM, wrenching or remove anything that can move and welding the regular vents and scrubbers around the engine. Make sure you have a spacesuit or hardsuit of course.'''
If all else failed, pray that an Atmosian elder investigates and finds the problem before it's too late.


== Delta station setup ==
Don't forget that these anomalies can yield anomaly cores which science loves.
====The Pyroclastic Anomaly====
The Pyroclastic Anomaly will spew out burning plasma and slimes which can make it very hard to contain the SM because everyone without sufficent heat protection will burn to death, or if you somehow survive the fire you will be greeted by very angry slimes. The best way to reduce the affect of this anomaly will be spacing the area around the SM so all the plasma from the anomaly will go into space and no fire will start. The slimes will also die from space if you do this because slimes do not like cold things. However, make sure to avoid the slimes because they do cellular damage which is very hard to heal.
====The Gravitational Anomaly====
The Gravitational Anomaly will pull anything unwreched and unanchored in its surrounding to itself. While not directly harmful, it can be quite annoying because it can throw you around aswell (This can be stopped by wearing magboots). It can also cause all the slimes from the pyroclastic anomalies to get sucked into the SM and slam them into it, causing a boost in MeV. This may be funny when it first happens, however the resulting power boost can result in even more anomalies or speed the delamination up.
====The Shock (Flux) Anomaly====
The Flux Anomaly is probably the most dangerous anomaly, as it can easily just shock you in a corner and kill you. Not even wearing a hardsuit and insulated gloves will protect you, so avoid these at all costs or you may die easily.
===If you have done all of this you should be ready for a SM of pure CO<sub>2</sub> or a little bit of tritium or something.===


FIRST OFF, WEAR A GODDAMN RADSUIT AND MESONS WHILE IN THE SUPERMATTER ENGINE ROOM


[[File:Supermatterdeltastationnew.png|650px|right]]
== AN IDIOT'S TL;DR ==
Welcome to bottom of the page, friend.


# See those pumps in the red circles? Crank them to max (4500 kPa) and turn them on. Three in total.
Did that seem like a lot of information? It sure feels like it.
# See those filters circled in blue? Same deal, turn those on and max their output. Set the one labeled 1 to filter plasma and 2 to nitrogen.
# See that air alarm circled in yellow? Swipe an atmos id to unlock it or just click it if you're a sillycon.
# Click on Vent Controls
# Scroll down the list until you see Atmospherics Engine vent pump #5, #6, and #7.
# Click both pressure regulator buttons so that internal is highlighted green and external is blue.
# Now go back and go to the scrubber controls.
# Set Atmospherics Engine air scrubber #3, #4, and #6 to siphoning, click the button that says Mode: Scrubbing to do that.
# Lock it or not, your choice. There's easier ways for a traitor to sabotage the engine if they want.
# Now go fetch some nitrogen canisters. Take them to the connectors circled in green and have the gas pumps empty them out into the loop. I use four in total.
# Let the loop run for a while to get it nice and cool. In the meantime, get a plasma canister (Either fill one up at atmos or get one from engineering's secure storage) and fill six plasma tanks up. Slap those tanks into these collectors circled in white, then click them to turn them on. If you need to retrieve a tank, turn it off and apply crowbar.
# The loop should be all cooled off by now. But before doing anything else, TURN OFF THE GAS PUMP CIRCLED IN GREEN.
# Fire the engine up! Click click those emitters circled in pink up top and don't stand on those green tiles to the right. Or you'll die and the observers will laugh at you.
# Once it's going, go to the SMES units (Follow the red arrow) and configure those. Max out input, set output to reasonable (or not) levels, simple.
# Go set up the [[Tesla Engine|tesla]]/[[Singularity Engine|singularity]], which is located below atmos, because delta is speshul and needs two engines to operate


BONUS: You know that plasma filter you set up at the start? If the round lasts long enough, it'll fill up those red pipes with cold plasma. Hook up an air pump to one of the connectors and use it to refill the plasma tanks. (Max out the regulator, set direction to in, attach tank, turn power on. Don't forget to turn it off before removing the tank.)
Cold plasma is longer lasting and much more effective in the radiation collectors.


== Sabotaging the supermatter ==
<u>Hell, maybe you didn't even read it!</u>
Want to sabotage the crystal but can't figure out how to pull it off? Here are some pointers and hints:


=== General hints ===
'''''FINE!'''''
*'''You can break the APC of the room to stop all pipes and scrubbers from working.'''
*Disable the telecomms APC with the CE console to prevent the supermatter from anouncing its status.
*Cut cameras near the engine.
*Instead of turning off pumps and filters, you can just set them to extremely low values instead. They'll still appear to be working.
*Taking out all the engineers before attempting a delamination helps a lot.
*Opening a canister of plasma in engineering and igniting it will make it a lot harder for people to fix your sabotage. Even more effective if the radiation levels are high.
*Keep a flash or EMP on hand. The AI and its borgs are pretty much guaranteed to try and intervene to prevent harm.
*Stay around and pretend to be helping so you can undo all the repair attempts by other people.


=== Regular delamination ===
These are the easiest to pull off and require no special conditions. You'll want to keep the supermatter chamber very hot and full of plasma or CO2.
*Use the filters near the emitter room to filter out N2 and N2O while keeping Plasma, Oxygen and CO2 in the loop.
*Pump in pure plasma or burn mix from atmos.
*Disable or break the cooling array. Deconstructing a single piece of the heat exchanger can be enough.
*Shooting guns at the crystal is extremely effective, but it's likely that you'll end up in the blast.
*Disable the scrubbers once the chamber is hot enough.


=== Overcharged delamination ===
Here a few pointers. ''Just'' for you, buddy.
This kind of delamination requires careful gas management but is faster, far more destructive and there's a good chance it will irridiate, burn and shock the engineers who are trying to fix it.
# Heat bad
*Ensure that only CO2 is in the supermatter chamber at all times. Filter all other gases and keep the scrubbers running.
# Pressure bad
*Keep the emitters online and firing if you can.
# High N2 good
*Get as much CO2 into the chamber as possible. Larger amounts of CO2 can even compensate for the oxygen and plasma waste.
# low O2 good
*Wear as much radiation protection as you can. Consider bringing some charcoal aswell.
# low plasma good
*Try to keep radiation suits away from engineers, they won't be able to get near the overcharged engine without one.
# Pumps bad
*Make sure you are wearing insulated gloves to protect yourself from the lightning arcs.
# straightpipes good
*Disabling the cooling is not required. In fact, keeping the chamber cool might help you get more power.
#''Mess with the SM air alarm scrubbers and vents <u>'''LAST'''</u>''
*The anomalies, gravity pulses and lightning arcs will quickly turn the engine room into a deathtrap. Make sure you have everything set up correctly before this starts happening.


=== Critical mass delamination ===
This is by far the most difficult but also the simplest one.
*Pump in as much gas as possible into the chamber. The easiest way to do this is to disable the pressure checks on the vent air alarms.
*Reverse the scrubber pump. It's a subtle alteration that might get overlooked in the heat of the moment and will prevent the excess gas from being pumped out.
*Make sure no gas leaves the chamber. Put up walls, deconstruct scrubber pipes, do whatever possible to keep the gas inside.


[[Category:Guides]]
Hope that helps, pal.

Latest revision as of 10:58, 8 July 2023

The Supermatter Crystal is the primary power source in most stations. A Supermatter Shard can be ordered from Cargo, which works the same way, but can be moved around. Its primary features are emitting tons of radiation, making everyone who could theoretically see it hallucinate, releasing hot oxygen and plasma, heating the air around, and exploding or creating singularity/tesla if you screw up. It begins inert but being hit by an object or projectile will activate it and it'll start producing huge amounts of radiation, which can be converted to power with the radiation collectors.

Do NOT run into the Supermatter to commit suicide! You will be banned.

Words of Warning

  1. The Supermatter is VERY DANGEROUS. Activating the Supermatter should be the last step in setting up any form of Supermatter based power! If you ordered it from cargo the crate should stay LOCKED AND SECURED until everything is ready.
  2. Do NOT setup the Supermatter's air alarm until you are absolutely satisfied the supermatter pipe loop. A common delamination occurs when engineers scrub the gases from the supermatter first without replacing it with a suitable gas. A void of gases will quickly spawn MASSIVE amounts of oxygen and heat, which can only be stopped by an extremely robust Atmosian.
  3. You require safety gear. A full radiation suit and meson scanners.
  4. Most of "setting up the Supermatter" involves a gas loop that is designed to cool down the Supermatter chamber. While not required, please have some knowledge of gasses or atmospheric properties.
  5. Anything that bumps into the Supermatter is fundamentally annihilated. Don't touch it.
  6. Hardsuits, excluding the CE's hardsuit, have limited radiation protection. The engineering hardsuit has 75% radiation protection. CE's hardsuit has 100%. Atmos hardsuit has 25%. RD's and CMO's have 60%. If working near an active Supermatter Engine, use a radiation suit instead.

The Safe Setup

The supermatter engine on current (2021) rotation maps can be set up in many different ways and experienced engineers are encouraged to experiment. The less experienced engineers can refer to the safe guide below. This is a simple nitrogen setup, easy to maintain and has two methods to handle sabotage (freezer backup and N2 preset). It will almost always last the entire round, and almost always generates enough power for the entire station.

There is an old video setup guide here, but the recommended guide below has changed since that video was made.

Step One: Gear Up

  1. Put on an optical meson scanner or Engineering scanner goggles on meson mode. All races except IPCs and Plasmamen will require a radiation suit in case someone prematurely activates the supermatter crystal.
    Why: Meson Scanners protect from hallucinations, while the suit protects from radiation. IPCs, Skeletons, and Plasmamen are inorganic and thus are immune to most of radiation's effects, but they CAN still suffer hallucinations. Once the engine is started, it will emit both.
  2. Grab both a Rapid Piping Device and wrench . You will be using these tools to edit or optimize the SM near constantly, so it's always good to keep them on your character.
    Why: The Piping Device can place or destroy pipes, as needed. While the wrench is the device to either secure or unsecure the item in place.
Meta Station SM. Enable and max green circles. Works counter clockwise. Toggle yellow squares, set gas. Enable cyan triangles and minimize temperature.
Box Station SM. Works counter-clockwise.
Pubby Station SM. The gas loop works clockwise here.
Delta Station SM. Works clockwise. The freezers are optional security in N2 setups. You would need to reconstruct part of the pipe and deconstruct the heater in order to enable them.

Step Two: Prepare The Gas Loop

  1. Unwrench and replace gas pumps (green circle in picture) and replace them with straight pipes.
    Why: Whoever designed this horrible loop has no idea how gases actually operate. If you expect to be constantly pumping gases through an area, the pumps will actually slow them down. Be certain
  2. Toggle the gas filters (yellow square in picture) ON and set to desired gas. By default, the filters have the correct N2 setup preselected, thus you can turn on all five. The first filter leading to canisters (green square) is for farming gases. If you want a panic button, you can set one filter to N2O also, as N2O is effective at extinguishing flames, should you get sabotaged. However, at VERY high temperatures, this will backfire.
    Why: The gas filters work by separating individual gases from a pipe. In the safe setup, this means that N2 is removed from an array of other harmful gases that exhaust from the SM like plasma. The exhaust exits the red pipe to space. By setting a filter to N2O, you can easily wrench in an N2O canister to extinguish most early destabilization.
  3. Wrench one of the red N2 canisters to activate the gas loop. This should be done when you have finished setting up the rest of the loop. Keep the other unwrenched so if, for some reason, the supermatter is deprived of nitrogen and you need new Nitrogen quickly. Wrenching them both when not needed is a waste.
    Why: Nitrogen (or whichever gas you end up using) must be put in the pipes in order to circulate. If you need to add other gases, you can add them here also or through the ATMOS to SUPERMATTER pump.
  4. Set the air alarm next to the crystal room. Open the air alarm menu (on most maps it will start unlocked), click Scrubber Controls and change the scrubbers to siphon (by clicking "scrubbing") and Expanded Range. You don't need to change any of the filter settings besides the mode, since, on "siphon", all gases get sucked out. The scrubbers will show an animation if they are set up to siphon correctly. Do NOT set the operating mode to "panic siphon" as that's not the same thing. Picture (click it): Scrubber Controls
    Why: Siphon makes the scrubbers remove all gases. This is to ensure hot gasses are removed from the chamber as fast as possible, to prevent too high pressure in the chamber.
  5. In the same air alarm, from the main menu, click Vent Controls and disable both regulators.
    Why: Some players insist that "Internal 0" is the best setting for the vents, but it is functionally identical to simply disabling both regulators, the former is also far less confusing.

Step Three: Starting The Radiation Collectors

  1. Obtain six plasma tanks . One can be found by the radiation collectors, and up to ten more can be taken from the tank dispenser. Feel free to unwrench the dispenser for easier transportation.
  2. Use either the Plasma canister in Secure Storage to fill the tanks, or ask/fill one yourself from atmospherics.
  3. Insert each plasma tank into a radiation collector , then turn each on by clicking it with an empty hand. Lock them with your ID card when you are done.
  4. It's worth pointing out that you may have to fill the tanks with extra plasma from a canister. Otherwise, the tanks will run out of plasma mid-shift and thus not produce power.

The engine is now ready to produce power.

Step Four: Start the Engine!

  1. Double-check to ensure the cooling loop is active, you don't want to have an active supermatter with a pump still set to 101kPa or the vents/scrubbers inactive!
  2. Align the reflectors so that the emitter beams are deflected towards the supermatter crystal.
  3. Head into the emitter chamber. It is on the right side of the picture above. Just click each emitter with an empty hand to turn them on. Don't stand in front of them unless you want some serious laser burns!
  4. Close the radiation shutters with the Radiation Shutters Control button (if available).

The supermatter is now generating power.

Final Step: Set Up the Power Storage Units (SMES)

  1. Go to the room in engineering with multiple SMES .
  2. Set each of their target inputs to 200 kW and target outputs to 190 kW.
    Why: This increases how much power they forward to the rest of the station. 10 kW will be used to keep the SMES fully charged for backup power.

Delta Station Irregularities

Delta Station setup follows the same philosophy, but the coolant loop is arranged somewhat differently. A much more detailed explanation is stated above. The same rules apply:

  1. Enabling gas pumps not labeled bypass (or straight pipe every pump).
  2. Enable gas filters.
  3. Don't forget the last gas pump on the right side!
  4. Set the air alarm .
  5. Add the plasma tanks to the radiation collectors .
  6. Close the shutters at the switch.
  7. On Delta station, the reflectors require being moved before being turned on emitters. You must unweld then unwrench them, then drag them into the proper position. Alt-clicking them changes rotation. A 90 degree angle will send a laser beam in a 90 degree angle, nothing too crazy. Optimal Settings are as follows: 225 for the left reflectors and 135 for the right reflectors
  8. Turn on the emitters!

TEG-based SM Irregularities

Some stations, including ,pubbystation, and corgstation start off with a Thermo-electric generated (TEG). A supermatter crystal emits oxygen and plasma when hit with an emitter, and these are scrubbed out, burnt and fed into the hot side of the TEG. Note that you can also set up a TEG on all other stations provided there is a source of gas, preferably plasma(it has the highest heat absorbance).

Read the PubbyStation SM setup guide here

Read the CorgStation SM setup guide here

Congratulations! The supermatter engine is set! Best bolt it so people so unauthorized personnel don't rush in.

A Robust Setup

This requires a bit more prepwork than the basic Safe Setup, but it pays off by being able to recover from disasters that would hopelessly delaminate other setups. Specifically, it can self-recover from completely voiding the SM chamber by using naturally generated Pluoxium as recovery coolant, and it's also possible (although maybe not advisable) to run at up to 96% CO2 without needing to upgrade the freezers or the heat-exchange pipes.

Robust Setup. Changes are in grey. Compare to Safe Setup picture above.

Step One: Gear Up

Get the same gear as usual. You may additionally want an ATMOS holofan projector if you are expanding the waste gas outlet, but that doesn't need to happen immediately.

Step Two: Prepare The Gas Loop

The image shows the setup for MetaStation; it is basically an extension of The Safe Setup and extends in natural ways on the other stations.

  1. Straight-pipe over everything that is a grey pipe in the picture. (This is generally former pumps.)
    Why: For the same reasons as The Safe Setup. The pump right in front of the door is also straight-piped, making the entire loop a single pipenet, allowing gas to flow directly from the scrubbers to the vents without any chance of clogging.
  2. Bypass the filter in front of the yellow canisters with layer adaptors.
    Why: This is needed to connect everything as one pipenet. (You can also straight-pipe over the filter, if you don't intend to extract Plasma or Pluoxium from the SM.)
  3. Replace the pressure pumps in front of the N2 cannisters with volume pumps. Wrench both down so they are ready to be used. These are for emergencies only; by default we won't use them.
    Why: Volume pumps pump much faster, and at higher pressures. They will also empty the tank, unlike straight-piping.
  4. Install two dedicated scrubbers in the SM chamber for waste gas, one on layer 4 next to the SM and one on layer 3 under the SM. DO NOT CLICK ON THE SM CRYSTAL TO PLACE ANYTHING! You have to alt-click the tile, and select the floor from the list, in order to safely construct the scrubber with your RPD. Same goes if you mess up and need to unwrench/deconstruct it. The layer adaptor is placed in the plasma window.
    Why: Having dedicated waste-gas scrubbers provides a clog-free way to filter the gas, and is also more versatile. The only downside is that it is easier to sabotage everything via the Air Alarm.
  5. Optional: For safety, replace the 3 vents in the SM chamber with injectors.
    Why: They perform the same, but they can't be controlled from the Air Alarm, which makes them much more resistant to tampering. However, replacing these is somewhat time-consuming (remember to turn them off before they can be removed), and it can only be done before the SM is started.
  6. Optional: For safety, add additional injectors to the waste gas output. Put the other injectors on layers 2 and 4, and deconstruct the window both for materials and to make room. With good use of the holofan projector, you can set all of it up from inside the station, without a hardsuit. Switch the regular pipe for the layer adaptor as the last change.
    Why: This has no effect during "standard" running conditions, but it can make all the difference during a fire, when the waste gas line gets clogged on the output. On maps like Meta that only have one Injector, this is highly recommended. However, it's very time-consuming, and it can be done while the SM is running, so you can put this off until after everything else.

Step Three: Configure the Air Alarm

  1. Set both freezers to "cooling", at their minimum temperature, and turn them on.
    Why: Even though un-upgraded freezers only go down to 73K, and thus will warm the coolant in some circumstances, in fires their huge cooling power makes an enormous difference. It's better to be prepared for disaster, than to be a few degrees colder in a situation where it doesn't matter.
  2. Ensure the SM monitor is running before you mess with the Air Alarm!
    Why: There's a bunch of things that can go wrong if you missed a pipe or a pump, and if you don't notice quickly the SM will probably delaminate.
  3. If you didn't replace the vents, disable the regulators on all 3 vents. Otherwise, there should be nothing in the Vent Controls menu.
    Why: This vents at the fastest rate. (Faster even than "Internal 0.")
  4. Set the last two scrubbers to Expanded Range and scrub everything *but* N2, CO2 and Pluoxium.
    Why: These are the waste-gas scrubbers, and everything that you're not keeping should be disposed of ASAP.
  5. Set the first three scrubbers to Expanded Range and scrub (only) N2, CO2 and Pluoxium.
    Why: These are the gasses for the cooling loop. N2 and Pluoxium are both good, safe cooling gases. CO2 is not, but in case of fire it will rapidly form Pluoxium, which we will want more of. It also won't be created unless there's a fire, or you're adding it yourself. So it's best to keep it around.

At this point the monitor should show only N2, at a pressure that is decreasing but proportional to temperature. If it seems like all the N2 is being sucked out, turn off the scrubbers and/or check your gas meters! Definitely don't let the SM chamber become a vacuum, that's a one-way ticket if everything isn't already set up properly.

If everything looks good, you can let the engine chill while you set up the rad collectors as usual.

Step Four: Start the Engine!

You can start the engine in the normal way, of course. But because of its robustness, there are a couple of additional options you can use in case of a complete power outage. If you have to resort to these, you should use wirecutters to cut power to the rest of the station, so that Engineering will get a chance to recharge first.

  1. Wire the solars.
    Why: This is the safe, sane solution. So of course we won't do that.
  2. Get Atmos to deliver CO2 and set the intake pump to 50-300kPa.
    Why: An engine running on CO2 will self-start. At high enough mole concentrations and CO2 percentage of 95-96%, the engine stabilizes around 4500 power without any emitters being active. At lower pressures that don't trigger CO2's power cascade, it will still self-start, but in the 1000-1200 power range, and be much safer to work with.
  3. Deliberately void the engine by setting the scrubbers to scrub N2 until it catches fire.
    Why: If you've upgraded the number of outlets, the engine can self-recover from this before it delaminates, although it will get ugly. Dumping emergency N2 in via the volume pumps will cut this cycle short and make this a not completely awful idea. If you have controlable vents, you can turn off the vents so that the N2 is merely backed up instead of vented; in this case when you turn the vents back on you should be able to recover before integrity gets below 90%. In all cases, the boost of power hopefully is enough to let you run the emitters normally in the future.

A Deeper Look: Mechanics

The supermatter is an extremely unstable crystal with particular properties. Here's how it behaves:

Power

The crystal's power determines how much energy is produced for each tick, and also the range and amount of radiation and hallucinations generated. (a 'tick' usually takes around 1-5 seconds depending on lag)

  • Power decays over time.
  • Hitting the crystal with a non-physical bullet (usually emitters) will increase its power. When hit by a "bullet" it increases power by the damage dealt multiplied by two.
  • Power is increased every tick depending on the gas mix. This scales with the gas' temperature.
  • Consuming an object or mob will increase the power by a significant amount, independently from the object's size.
  • Power decay can be lowered or even completely prevented with CO2.
  • Too much power will result in dangerous side effects, like arcs of lightning or anomalies.

Instability

The crystal must be kept stable if you don't want it to explode.

  • Stability will not change by itself.
  • The crystal grows unstable if the gas mix is hotter than 310K and stabilize if below.
  • Physical bullets will destabilize the crystal, depending on the damage they do.
  • Large amounts of power will destabilize the crystal. The highest safe limit of the supermatter is 5000 EER/cm³.
  • Large amounts of moles will not only destabilize the crystal but also prevent the stabilizing effect of cold gases. This effect starts at about 12000 moles of any gas on the supermatter's tile.

Gas Interactions

Each gas has a different effect when it surrounds the supermatter crystal. The strength of each effect depends on the percentage of it in the gasmix in the supermatter chamber.

Pluoxium Safety: Pillow Fort

Pluoxium is like a weaker N2O without any of the risks. At 15% of the total gas or higher, it will lower the heat production of the Supermatter slightly less than N2, and increase the heat resistance by half that of N2O. However unlike N2O it does not decay, making it the perfect emergency gas if you can get enough. Pluoxium has the side effect of reducing radiation relative to its ratio in the mix, causing lowered power output at high concentrations.


N2 Safety: Very Safe

N2 is, in a large majority of situations, the safest gas to dump into the cooling loop. It actively lowers the temperature and the amount of waste gases that the supermatter crystal produces. A side effect of the safety it provides is that it also reduces power output of the engine. Precooled N2 is good to have around for emergencies. Straight piped default setup with three emitters should generate around 65 kW per rad. collector.

N2O Safety: Risky

N2O reinforces the heat resistance of the supermatter crystal, allowing for much hotter setups than usual. However, at higher temperatures (such as during a heat delamination) it will decay into O2 and N2. While N2 is good for the supermatter, O2 most certainly is not. This O2 will also react with the Plasma to create Tritium and then, to the further horror of many an Engineer, a Tritium fire. At lower temperatures and in more controlled setups, it can also combine with Plasma to create low amounts of BZ inside the loop.
Marked as risky only to stop you from throwing N2O into the SM mindlessly. Yes, you.

CO2 Safety: Very Risky

CO2 is a potentially dangerous yet very rewarding gas - in concentrations below 60% CO2 your safe while on a normal loop, it will increase the crystal's power generation and can be used to produce Pluoxium as well.
In high concentrations (above 60% CO2), however, it will raise the crystal's energy to extremely high levels. If you take precaution and upgrade the loop to with 3 layer space cool loop and freezers at Tier 4 parts you will be safe between 60% to 92%, this is a phenomenal way to generate power.

With poor management and insufficient or downright bad preparation(or perhaps good preparation from certain points of view), it will eventually exceed safe energy levels and begin a charge delamination past 5000MeV, producing electric arcs and anomalies until it eventually explodes into a Tesla ball. This is however the premium SM gas.
O2 Safety: Relatively Dangerous

Oxygen provides a boost to power transmission without actively increasing the waste gas amount or temperature.
Pretty risky to use, as any disruption of the cooling loop will soon cause a plasma fire in the crystal chamber. Even just a high concentration of O2 will activate and continuously power the crystal.
If you're badass enough to run an O2 setup: Always precool it before flooding the Supermatter chamber.
BZ Safety: Dangerous

BZ increases the heat produced by the supermatter, as well as the radiation. Higher concentrations increase the radiation production up to 5 fold, but will become difficult to manage without significant set up. BZ also has the side effect of lower the power the radiation from the Supermatter grants, meaning while the produced rads increase 5 fold, the power does not. At a 40% of the mix, the Supermatter will start to fire irradiating nuclear particles. Don't get hit by these, regardless of your clothing.


Plasma Safety: Very dangerous

Plasma is very similar to Oxygen but provides a much higher power boost as well as waste and heat penalty. The extreme pressures and volumes of gas produced by this gas are very likely to clog pipes.
WARNING: The roundstart setup cannot handle pure plasma setups.

Tritium Safety: OH GOD OH F*CK

Tritium increases the radiation production of the Supermatter by up to 3 times, without BZ's downside of lowering energy production. There is one slight issue with it.

Tritium is dangerous. Tritium is very dangerous. Tritium makes Plasma seem safe. Even with extremely robust cooling systems, Tritium is a horrifyingly irritable and jumpy gas. While it isn't as harmful to the heat level as Plasma is (just barely), it also has the second worst heat capacity of all gasses while Plasma has the second highest. This means that Plasma can be kept happy with enough cooling, whereas Tritium eagerly goes from a safe space loop into a burning hellfire. Add to this the byproduct of large amounts of Oxygen production (not exclusive to Tritium. An issue in a Plasma engine too), and you have a tritium fire and a very hot crystal. Do not use this gas unless you have a very strong understanding of atmospherics and the Supermatter, and are willing to get creative. What ever cooling method that works on a Co2 SM will need to be tripled for tritium.

Gas Production

The crystal produces plasma and oxygen while it's active.

  • Plasma and Oxygen burn if they're hot enough. This will heavily increase the temperature and reduce the oxygen percentage; if not kept under control this can end up destabilizing the crystal.
  • The amount and temperature of the produced gas are determined by the current crystal power.
  • The amount of oxygen is proportional to the temperature of the absorbed gases. Very cold gas input will result in very little oxygen.

Irradiation

The crystal will affect nearby mobs while it's active.

  • The range and power are determined by the current power. Being further away from the crystal also mitigates the effect.
  • The crystal will cause hallucinations to nearby mobs if they're not wearing meson scanners or equivalents.
  • The crystal will irradiate nearby mobs. A radsuit or other protective clothing can negate this effect. IPCs are immune to this effect, but will still be irridated.

Consuming

Anything that touches the crystal will be consumed and turned into dust. No exceptions. The only way to "safely" transport a shard is to pull it, being careful to not be pushed back into it by someone else.

Collapsing

If the crystal reaches 100% instability, it will delaminate. There are several different events that may happen when the crystal delaminates and they all depend on the state of the crystal during delamination.

  • A crystal in a heavily pressurized gas environment with large amounts of moles will always collapse into a singularity.
  • A crystal that has excessive amounts of power stored inside it will cause an explosion and release several tesla energy balls.
  • A crystal that is neither heavily overpressurized or overcharged to meet the prior criterium will simply explode, with several factors including its power amount or pressurization contributing to the resulting explosion size.

Beyond the Safety: Improving the Power Output and Endangering Crew

Here are some pointers and hints on how to get more power out of this engine:

  • Coordinate with other engineers. Don't just silently adjust gases and pumps or you might end up causing accidents or decreasing efficiency.
  • Higher temperatures generate more energy.
  • Higher amounts of oxygen moles result in more power.
  • You can pump gas from the atmos mixing loop directly into the engine by using the orange pipe.
  • The supermatter crystal will glow in a distinct orange color if the gas composition and pressure levels in the chamber are ideal. This will reduce the impact of heat on the generation of power.
  • Consider setting the first filter of the loop to plasma. The supermatter produces plasma, which can be collected and used to refill the radiation collectors if the round goes on for too long.
  • The gas loop isn't that efficient at roundstart! Consider tuning it to run better by adding better cooling or improving the current loop efficiency.
  • Gasses leaving the SM go straight to the heat exchangers then to the filters, this means you cool all your gasses and then remove gasses. If you filter first you can get improved cooling (since you don't waste energy cooling unused gas) allowing for more dangerous gasses to be used easier.
  • Plasma is terrible inside of the SM, potentially worse than Carbon Dioxide. Despite being terrible inside the chamber, it is incredible for its heat .
  • Producing loads of power sounds great, but as soon as you go over 5000 MeV/cm³ anomalies will start forming rapidly and the SM will likely delaminate.
  • You can place 2 heat exchange pipes on one tile as long as one is horizontal and one is vertical, double the cooling power!


But I don't want to experiment!

  1. Grab N2O canisters from atmospherics
  2. Set one of the filters to allow N2O
  3. Wrench the N2O canister into place
  4. ???
  5. Profit

OR

  1. Add more reflectors
  2. Add more emitters
  3. ???
  4. Profit

Troubleshooting AKA Oh god it's on fire what do I do!?

Supermatter Sabotage

The supermatter's in trouble! You should be able to locate where the issue is from the screenshot alone. Here's the answer.

Handy Guide To SM Repair

Inspect the gas loop to confirm it is intact and operational.
Check the meters to quickly ascertain where a problem may lie.
If any of the meters report an unusually high or low amount of gas, then you're close to finding the issue!

Common gas loop failures include:

  • Gas pumps are OFF or left on the wrong pressure (Crank them up to 4500kpa!).
  • Gas filters are OFF or set to the wrong gas. Remember! Filters do not allow ANY gas to pass through if they're turned off! If you don't wish to filter anything, leave them online but set to filter nothing.
  • Part of the coolant loop has been broken or unwrenched. You must don a space-worthy suit and go fix it! This may mean wrenching it back or recreating it with your RPD .
  • Supermatter chamber air alarm has the vents improperly configured. Set them to internal, turn off external, make sure ON is toggled.
  • Supermatter chamber scrubbers not siphoning or turned off. Set to siphoning, expanded range, and ON.
  • One of the pipes has been broken or unwrenched. You can easily put it back in place with a wrench or recreate it with your RPD.
  • Too much gas for standard setup! Remember that gas pumps are the lowest tier for circulation. If a section has too high of a pressure, the pumps cannot push anything more into it! This will cause a slow delamination.
  • Too little gas! The more (cold) gas there is, the faster the gas will be able to siphon heat away from the crystal. A supermatter crystal in near-vacuum is just looking for an excuse to overheat.
  • One or all of the tiles around the crystal is missing! This will siphon gases directly into space. Make sure they're built, replace any piping that might have existed there.
  • The tile under the crystal is missing! Get and Rapid Constructor and place a tile with alt+click! Do not touch it with a normal click
  • Did you set one of the air filters to N2O, as stated earlier in the guide? Bringing a container of N2O from atmospherics can extinguish flames inside the chamber without needing to risk firefighting. It also increases the power output of the SM!

Sabotaging the Supermatter

Want to sabotage the crystal but can't figure out how to pull it off? Here are some pointers and hints:

General hints

  • You can break the APC of the room to stop all pipes and scrubbers from working.
  • Cut cameras near the engine.
  • Straight piping the supermatter coolant loop greatly increases the rate of delamination. It can also be saved easier, so ensure it is not corrected fast. A non-robust engineering department is doomed.
  • Instead of turning off pumps and filters, you can just set them to extremely low values instead. They'll still appear to be working.
  • Taking out all the engineers before attempting a delamination helps a lot.
  • Opening a canister of plasma in engineering and igniting it will make it a lot harder for people to fix your sabotage. Even more effective if the radiation levels are high.
  • Keep a flash or EMP on hand. The AI and its borgs are pretty much guaranteed to try and intervene to prevent harm.
  • Stay around and pretend to be helping so you can undo all the repair attempts by other people.
  • With a little bit of tinkering, you can sabotage the station's distribution loop with any of the multitude of harmful waste gases produced.

Regular delamination

These are the easiest to pull off and require no special conditions. You can cause a normal delamination by:

  • Turning down or turning off gas pumps
  • Turning off or changing the gas on a gas filter
  • Unwrenching any pipe. Note: This will release all gases stored in said pipe (bad if plasma or superheated gas).
  • Shooting guns at the crystal is extremely effective, but it's likely that you'll end up in the blast.
  • Disabling the scrubbers or vents in the air alarm.
  • Adding a very harmful gas like plasma, but make sure you have the gas filters set to allow it in circulation first.
  • If you plan to delaminate the supermatter, consider cutting telecommunications or edit it so it filters Engineering out. They wont hear the warnings until it is too late...
  • Stealth sabotage: Unwrench a portion of the space loop. Generally, no one looks in space to correct this, and it is not obvious a piece is not connected.

Overcharged delamination

This kind of delamination requires careful gas management but is faster, far more destructive and there's a good chance it will irradiate, burn and shock the engineers who are trying to fix it.

  1. Wear as much radiation protection as you can. Hide or destroy the rest.
  2. Wear insulated gloves so you are not shocked by arcs. Destroy any other gloves remaining.
  3. Shut off all cameras.
  4. Keep the emitters online and firing. Add extra emitters if possible. You can swipe an ID to lock them(which even the AI is unable to bypass), but the wires can still be cut.
  5. Break into atmos and configure pure CO2 to be sent to the engine coolant loop. A better way of doing this removing the pipe into atmos from space and rerouting it that so it cannot be turned off.
  6. (Optional) Deal with tcomms through destruction, depowering, or filtering out the Engineering Radio Channel.
  7. Now to start the delamination. Set all air filters to CO2.
  8. If needed, enable the pipe of CO2 from atmos you configured earlier.
  9. Access the air alarm and turn off scrubbers. Pump as much CO2 into the chamber as possible.
  10. Sabotage entry to the room, and/or release plasma in the room around the SM chamber.
  11. The anomalies, gravity pulses and lightning arcs will quickly turn the engine room into a deathtrap. Make sure you have everything set up correctly before this starts happening.
  12. The engine will start broadcasting obvious and dire messages that something is very wrong over common radio frequencies. If comms are down, this is not a problem. Note: People carrying laptops can still see the engine status.
  13. Stick around only long enough to ensure that it is not stopped.
  14. Embrace the energetic god

Critical mass delamination

A critical mass delam is one of the more difficult methods. It takes longer and there is a chance it reverts to an overcharged delamination. It follows the steps of the previous delamination, but instead we will be pumping plasma from atmospherics. The goal is to have as much gases selected at the filters.

  1. Get the gear.
  2. Straight pipe the system.
  3. Cut the cameras.
  4. Select four different harmful gases - Oxygen, Plasma, Tritium, CO2. Alternatively if you immediately start pumping N2 from atmospherics to the SM at the start of the round it will delaminate within 12 minutes.
  5. Disable the scrubbers from the air alarm OR unwrench part of the pipe leading out.
  6. Sabotage the room.
  7. Stay close until it's too late to save.
  8. Run like hell.
  9. The Lord arrives

Cold gas, a glowy crystal, some lasers, and you: A deeper dive into the Supermatter Engine

This is very rambly, but useful information will be given throughout. It's recommended to read it all, as it covers critical aspects of atmospherics functionality and, thus, the Supermatter. But if you just want the conclusion on a whole lot of theory, skim read the bulk of it but pay attention at the end.

The basics of gas. Rule 0 of atmospherics and the Supermatter

First things first, and extremely importantly: gas does not work like you think it does.

A common, and reasonable, misconception is that gas flows. In atmospherics, gas does not move from one pipe to another. Instead, gas “Exists omnipresently within a pipenetwork”. What this means is that gas within a pipenetwork (commonly referred to as just a pipenet) exists in perfect equilibrium of both gas and temperature. If you have a pipenetwork from one end of the universe to the other, and added let’s say 1 mole of oxygen, then there would immediately be gas at the other end of the universe. Every single pipe would have the exact same gas, at the exact same pressure, at the exact same temperature. Say we then add some N2O, then the exact same thing would happen. The gas, mixed perfectly with the oxygen, across every single pipe.

tldr; gas behaves more like electricity moving across wires(I.E. instantly) than IRL gases

Now it’s important to clarify what exactly a pipenetwork is. A pipenetwork is any connection of pipes wherein a pipe can be traced to another pipe via at least 1 pipe. So it doesn’t matter how many pumps you have between your pipes if even 1 length of pipes can be traced around those pumps. At which point, it’s part of the same pipenetwork, and the pump is irrelevant.

This might sound a little weird. To clarify, don’t think of pipes like a method of transport. Nothing travels through pipes. Think of pipes like a container for gas.

For this, I like to use the basin analogy. Imagine you have 3 things: A basin or bucket or something similar, a cup, and some liquid. The pipes are the basin, the cups are the pumps, and the liquid is the gas. If you add something into the basin, it doesn’t travel in a direction towards the next area, it simply enters equilibrium with the rest of the contents (please ignore brownian motion for this analogy. If you don’t know what this is, good, it’s not helpful here). If you want to move something from one basin to another, you dip a cup in and pour it into the next basin. That’s how pumps work. They, like the cup, move the contents from one container to another in bulk loads.

Call back to what I said about pipenetworks and pumps a moment ago. Having a pump inside of a pipenetwork is like using your cup to take out of the basin and pour back into it. It accomplishes nothing, because the contents aren’t changing.

So with this in mind, how does clogging occur?


A horror story of pumps and hot gas

Pipes do not clog, period. Filters clog, pumps clog, scrubbers clog, vents can clog (depending on settings). But pipes, however, do not. There is no upper limit on the pressure of pipes. A pipe, in theory, can store infinite pressure and, thus, infinite gas.

However, there is an upper limit on what pressure pumps, filters, and scrubbers can get into pipes. This may sound similar, but it has large consequences.

For example, a pressure pump has a maximum pressure of 4500 kPa. That means that every time it pumps gas, it can move up to but no more than 4500 kPa of that gas. It also means that if the pressure of the pipenetwork it’s pumping into is equal to or greater than that value, it will be unable to move the gas. This is referred to as a pump becoming backed up or clogged.

To the right you'll find an image used earlier in this guide, but it is updated to show the separate pipenetworks the roundstart Supermatter has on Box station. Each of these pipenetworks is separate, but are in perfect equilibrium within themselves. So if you checked the gas in the green pipenetwork, it doesn’t matter where you checked, it would display the same. Likewise, the blue pipenet may be different than the green pipenet. But everywhere in the blue pipenetwork you check would, again, be identical to anywhere else in the blue pipenetwork.

But dear Mr. Guide Writer, why does this matter, at all? Why show me just how many pipenetworks exist in the round start setup, what does it matter? Two reasons.

  • Pumps, filters, and mixers do not efficiently pump connected pipenetworks at all.
  • Gas. as mentioned earlier, is always evenly spread through a pipenetwork and without direction to it. (“Gas exists omnipresently within a pipenetwork”)

Let's start with the first thing, pumps. All types of pumps (not filters and mixers and the like) have 200L volume in the small bit of pipe before them, and 200L in the small bit of pipe after them. As such, a volume pump pumps all the gas that is in that node to the other side of the pump, per second (the maximum pump rate for volume pumps is 200L/s). As such, if a pipe network has 2000L of volume, connected to a volume pump that is pumping at its max rate, it will pump 1/10th of all gas in the network, per second. However, you also have to take into account that it's always 1/10th of the gas that is in the pipes, as such, pumps will pump less moles of gas per second as there is less and less gas in the network before the pump.

Put simply, pumps exist to restrict and direct gas by their very nature. If you need to move gas from one place to another quickly, adding a pump will only slow it down. Starting to see where this is going? Well, there’s another reason pumps are bad, and it ties back in to the previous section.

Pumps have an upper-pressure limit, same for filters and mixers. For the gas pump, and the others, the pressure limit is plain to see, 4500 kPa. However, the volume pump also has a pressure limit, rated at 9000 kPa. Scrubbers in fact also have a pressure limit, sitting around 5200 kPa.

Gas pumps and mixers are especially poor, as their pumping slows down the closer they get to their pressure limit.

What does this mean for the Supermatter, especially in case of delamination? Well, the room is probably on fire, so the gas has expanded, which in turn makes it far more pressurized. The knock-on effect? Follow along with the image to the right. We’re starting at the left side of the central Supermatter chamber. The yellow pipenet before the red.

  • Yellow: First, the scrubbers work their butt off to get to their pressure limit. The gas is hot, so that doesn't take very much.
  • Red: While this happens, a gas pump takes the tiny amount of moles in the pipenetwork the scrubbers are connected to and shoves a small amount of it into the pipenetwork beyond it. Slowing down even further, as the gas is so hot it easily reaches the pressure limit.
  • Blue: This then reaches the filter, which again tries to pump the small amount of moles beyond it, with another case of pressure limit slowness and the fact, not all gas is available for pumping at any moment.

Repeat the above for all the following pumps. Add to this the fact that the Supermatter produces plasma and oxygen, which are reacting with each other and burning in the pipes, likely pushing the pressure above the limits of what the pumps can handle and... well you got the point right? That’s what happening to your pumps every single time the Supermatter ignites.

Well, that all sounded horrid, how can we prevent this?

How removing pumps made me a billionaire

The title gives it away, really. You want to replace most pumps you can find with either straight pipes, or with valves to allow for easier modification and changing where the gas goes on the fly. ESPECIALLY THE FILTERS NEED TO EITHER BE REMOVED OR UTILISED PROPERLY IN THE CASE OF A DELAMINATION OR WHEN OPTIMISING.

Now, to explain why this is the proper option in most cases. As mentioned continuously, gas in a network is always evenly spread through all connected pipe. it's always the same ratio of gasses, it's always the same temperature. It’s always in perfect equilibrium in every sense of the word.

If you’ve been following along, then you likely know what this means. By replacing all the pumps up to the space loop with pipes, clogging is no longer an issue. The gas will leave the supermatter and immediately be cooled by space. No delay, no travelling, because the pipe connected to the scrubber holds the exact same amount, temperature, etc as any of the pipes in the space loop (marked as Green)

But, why stop there? You already know that gas doesn’t travel inside of pipenetworks, so these other two pumps (Blue to Red | Green to Red) aren’t actually assisting in cooling after all* (There will be a small note at the end of this section) so why not simply replace them with pipes? Well, that has an added bonus. In a standard setup, or any setup which stops gas flowing from Blue to Red, the only connection between the gas return filters (Green circled filters at the bottom) is the heat exchange pipes in the space loop. If somewhere were to cut one, then the gas could no longer reach the return filters. Eventually the supermatter would run out of coolant, and a delam would begin.

But, say those pumps were both turned into pipes. Well, then cutting a single pipe in the space loop would do next to nothing. We’d lose the gas from that one cut pipe, but the rest of the piping is still connected, and the engine continues safely. You won’t even notice the change.

“Wait!” you may be thinking, “the pipes will leak!”

Thankfully, that makes far too much sense for atmospherics. Pipes don’t leak. At all. Now, the gas that was within that specific pipe will be expelled into the air, yes. But the gas from other pipes can and will not exit out of the newly made ‘opening’, if you can call it that.

So that’s two very nice bonuses. Gas is immediately cooled, and the supermatter is harder to tamper with. It’d would be fine if that was all these changes gave us. There’s one more nice bonus, though.

The volume of the pipenetwork is increased massively. Pumps, as we’ve discussed, have a pressure limit. The greater the number of pipes in front of a pump, the greater the volume that the pump perceives, and the more gas it can put in. Put simply, if you have a single pipe of 4500 kPa, a pressure pump cannot continue pumping. Add another pipe, and suddenly it’s 2250 kPa each, and the pressure pump will continue until both pipes are 4500 kPa. Every time a pipe is added, the ‘capacity’ increases. By replacing all these pumps with pipes you have changed a number of pipenetworks of only 10-20 each to a full pipenetwork of 50+. Suddenly the scrubbers don’t have to worry about pressure as much, especially on top of the instant cooling.

Lastly, though only vaguely related, keep your vents on internal 0, not on external 5000. Vents do not actually have a pressure limit at all. They can continue to add pressure constantly, however, they do work faster if the chamber they are connected to is lower pressure, and the gas they're pumping is cold, but this is always true. Essentially, vents pump a static amount of pressure when they're at maximum speed. If nothing very, very strange is happening, the gas that the vents are attempting to pump in is colder than what is in the chamber, as it already went through the cooling part of the pipes. As such, having the vents on internal 0, and with it, always pumping the hardest they can, they are adding gas that is colder than what is currently in the chamber itself. This contributes to the cooling down of the chamber, and is often enough to prevent a heat delamination by itself.

External 5000 suffers from the same issues as a pump does, vents will completely stop pumping in gas when the room it is trying to pump into is 5000 kPa or above, which happens fairly quickly in a small room that is white hot. So remember, internal 0, unless there is too much gas in the room (see singularity delamination).

* The small note at the end of the section: You can consider placing restrictive pumps in certain areas so hot gas can't travel through quickly and give it more time to cool, though there are often better ways to do this that are less dangerous. Still, the option is there.

Breaking the laws of thermodynamics and a final word

EDIT: Space is now 2.7K making it the best cooling solution at round start and equal to t4 freezers.

Freezers. That is all. Freezers are magical machines that break the laws of thermodynamics by even existing and work to extremely quickly heat or cool gas to the temperature they are set at. They are much, much quicker than space could ever hope to be when upgraded, and even colder. Space, at its coldest, is about 26K. Freezers can go as low as 2.7K when fully upgraded, and are much quicker at cooling. A word of warning, however. Freezers will attempt to change the temperature of the gas that is in them to the temperature it is set at, this seems obvious, but that also means it can heat gas. As space is around 26K, and unupgraded freezers only go to 73.15K. As the gas is returning from space, this will often serve the heat the gas. However, as 73.15K is still far cooler than any worrisome temperature for the Supermatter, it’s worth considering leaving them on depending on your setup. As during a delam, gas can return from the space loop still warmer than you’d like it, and it adds a second layer of security just in case. Especially if something… Unfortunate happens to the piping out there.

If you somehow read through all that, I very strongly applaud you, and I applaud you on likely becoming an engineer that is a few times less clueless. Despite all the things you now may know, there is a lot to experiment with, and lots of ways left to mess up in spectacular ways. Try to keep learning more and more as you go, and good luck in your attempts to not blow up the station.

How to cool your Supermatter to where it may become a problem

Your Tablet

Normally, most people just throw this away at the start of the shift but your tablet has a program to monitor the SM. Its good practice to take out your tablet to immediately download the Supermatter Monitoring app at roundstart. Simply keep your tablet on this and in your pocket and you will be able to constantly see the monitor for the entire round, instead of having to go to a static computer every time you want to look at its status.

Pressure vs. Volume

Normally, your Supermatter is equipped with pressure pumps which max out at 4500 kPa, the problem is that they aren't that fast. In theory Volume pumps are just as fast, but they can pump until 9000 kPa. This means that in case of a heat delamination they can continue pumping even when normal gas pumps would already have given up. By replacing everything that uses pressure pumps to volume pumps you can make the cooling of your SM a lot faster.

Pump Cleanup

The even faster way to cool your SM is to remove all of your pumps except for the ones infront of the canisters and the atmos to loop pump and then replace all of your pumps with pipes after. Pipes have no upper pressure limit, so they will never get clogged. Another benefit of straight-piping is that gas is omnipresent within a pipenet, meaning that if you have no pumps between your scrubbers and the space loop your gas is going to get cooled immediately!

The other layers

A huge part of the SM is the speed you can get gasses from the scubbers to the vents, the first and third layer helps a ton with this. By setting all your things with layer adaptors behind them and a device for every layer you can make everything a lot faster.

Error creating thumbnail: File missing

Filtering with the other layers

Normally you get 4 filters all on the second layer, but these are useless and just slow down the unfiltered gasses. Instead of having one filter you're gonna need 3 filters with layer adaptors before them.

Each filter normally filters at 200 L/s but with the layer adapators you're gonna get to 600 L/s, making your gas a lot faster since all filters can move the gas at the same time (Since gas is omnipresent within a pipenet) instead of moving it from one filter to the next.

You are also gonna need two of these for the next cooling strategy, one for going into the cooling loop and one for going into the SM.

Plasma Cooling

Plasma may be seen as a gas that can heat up quickly and makes fires, but it can be used to cool down your SM way more. The reason for that is that Plasma has a very high heat capacity (200) compared to other gases (for example, Nitrogen has a heat capacity of 20). The higher the heat capacity, the more energy it takes to raise the temperature of the gas. So you could disconnect the space loop from the rest of the cooling loop, fill it with plasma and connect both loops with heat exchangers so the cold plasma cools down the gas inside the normal cooling loop.

Plasma can keep a very cold temperature for a long time and if you filter it out of the SM into the cold loop and use it for further cooling you can keep your SM very cold.

Space cooling with the other layers

Just what it sounds like, add 2 more layers to your space cooling and it provides a great boost to how cold your SM is.

Your Freezers

The freezers you are given can be your savior but also your demise. The problem is unless you have upgraded their parts to T4 parts (the bluespace ones) it will actually heat up your gas instead of cooling it down. If you ever turn these on it will provide a great cooling boost but is not recommended below T4 parts or in an emergency.

The useless Additions

The pump infront of the SM, the bypass pump. I don't even know why it exsists but you should always remove this and change the pipes from manifolds to normal pipes. Edit: I was told this was used so rather then pumping gas into the SM you could put it into the cold loop to keep gas colder, but I've never used this myself.

The Filter to canister in the upper left corner of the cooling loop can be useful if you want to farm gases like Pluoxium with a CO2 SM, but in most cases you should remove this and replace it with a normal pipe so your coolant isn't getting slowed down on the way to the space loop.

However, you can also place a layer adaptor in front and after the filter and connect it with a straight pipe on another layer. Through that, the gas will not be slowed down because it can travel through the normal pipes, but you can also farm gases because the filter is still functional, meaning this setup has no real downsides.

Passive venting

Normally a SM has unary vents which if you set your air alarm up correctly will try to deplete its pipes to 0 kPa. Passive vents however link the atmosphere to the pipes, so the scrubbers will be scrubbing directly from the pipes and it will make gases going into the SM a lot faster. Be very careful when putting these into the SM room, one touch of the SM and you are dead. It is also recommended to put a holofan infront of the SM so gas isn't leaked. Also, this will cause your SM to lose gas because the gas goes into the pipes so make sure everything else is ready before putting these in.

Scrubbing and cooling under the SM

Error creating thumbnail: File missing

Putting things under the SM is dangerous, but if you want to cool it more this is the next step and recommended for setups that involve dangerous gases. By alt-clicking the SM you can view the floor under it and put pipes and devices under the SM. You're gonna need heat transfer pipes and scrubbers.

The Scrubbers

The scrubbers should not be scrubbing all the air but instead should be scrubbing all the O2 so a fire doesn't start and heat up the SM a ton.

The Heat Transfer Pipes

By adding heat transfer pipes with plasma and freezers hooked up to them you can greatly cool the SM. But if you change these to heaters you can also greatly heat the SM, resulting in a delamination. The freezers have to be equipped with Tier 4 parts or they will be less efficient than space.

The Anomalies

Once reaching 5k MeV (More at 7k MeV, however 5k is the safe upper limit), 7000 Kelvin or enough pressure, anomalies will start appearing outside the SM. This is a big problem because of their affects:

The easiest way to prevent anomalies from causing harm in engineering is completely removing all floor tiles leaving the cold space surrounding the SM, wrenching or remove anything that can move and welding the regular vents and scrubbers around the engine. Make sure you have a spacesuit or hardsuit of course.

Don't forget that these anomalies can yield anomaly cores which science loves.

The Pyroclastic Anomaly

The Pyroclastic Anomaly will spew out burning plasma and slimes which can make it very hard to contain the SM because everyone without sufficent heat protection will burn to death, or if you somehow survive the fire you will be greeted by very angry slimes. The best way to reduce the affect of this anomaly will be spacing the area around the SM so all the plasma from the anomaly will go into space and no fire will start. The slimes will also die from space if you do this because slimes do not like cold things. However, make sure to avoid the slimes because they do cellular damage which is very hard to heal.

The Gravitational Anomaly

The Gravitational Anomaly will pull anything unwreched and unanchored in its surrounding to itself. While not directly harmful, it can be quite annoying because it can throw you around aswell (This can be stopped by wearing magboots). It can also cause all the slimes from the pyroclastic anomalies to get sucked into the SM and slam them into it, causing a boost in MeV. This may be funny when it first happens, however the resulting power boost can result in even more anomalies or speed the delamination up.

The Shock (Flux) Anomaly

The Flux Anomaly is probably the most dangerous anomaly, as it can easily just shock you in a corner and kill you. Not even wearing a hardsuit and insulated gloves will protect you, so avoid these at all costs or you may die easily.

If you have done all of this you should be ready for a SM of pure CO2 or a little bit of tritium or something.

AN IDIOT'S TL;DR

Welcome to bottom of the page, friend.

Did that seem like a lot of information? It sure feels like it.


Hell, maybe you didn't even read it!

FINE!


Here a few pointers. Just for you, buddy.

  1. Heat bad
  2. Pressure bad
  3. High N2 good
  4. low O2 good
  5. low plasma good
  6. Pumps bad
  7. straightpipes good
  8. Mess with the SM air alarm scrubbers and vents LAST


Hope that helps, pal.