Hacking: Difference between revisions

From BeeStation Wiki
Jump to navigation Jump to search
imported>Deantwo
(A lot of this i am o)
 
(92 intermediate revisions by 30 users not shown)
Line 1: Line 1:
==What you'll need==
== Your tools ==
* '''[[Insulated Gloves]]''' Hackables have power lines, and cutting/pulsing these without gloves can harm you.
[[File:IGloves.png|link=Insulated Gloves]] '''[[Insulated Gloves]]''' for mitigating shocks. Hackables have power lines, and cutting/pulsing these without gloves can and will harm you. It's possible to hack without them, but it will be slow, painful, and you'll need ointment. Alternatively you can drink [[File:Energy_drink.png|64px]][[Guide_to_food_and_drinks#Grey_Bull|Grey Bull]], which makes you immune to shocks for a short while.  
* '''[[Screwdriver]]''' for opening up panels and the like. A necessary tool
* '''[[Wirecutters]]''' for cutting and mending wires. Also a necessary tool
* '''[[Multitool]]''' for pulsing wires; not necessary for most hacking, but makes life a lot easier.


==Important Hackables==
[[File:Screwdriver_tool.png|link=Screwdriver]] '''[[Screwdriver]]''' for opening up panels and the like. A necessary tool.


===[[Airlock]]s===
[[File:Wirecutters.png|link=Wirecutters]] '''[[Wirecutters]]''' for cutting and mending wires.
[[File:door.png|50px|link=Airlock]]     [[File:glassdoor.png|50px|link=Airlock]]     [[File:Airlock2.png|50px|link=Airlock]]


Both internal and external access airlocks are hackable. Wires are randomized at the start of each round, but are standardized throughout the station, e.g., every orange wire might toggle the bolts. This is probably where you'll be doing the most of your hacking. Remember, cutting power to the door will stop everything else from working.
[[File:Multitool.png|link=Multitool]] '''[[Multitool]]''' for pulsing wires. Not necessary for most hacking, but makes life a lot easier.
# Screwdriver in hand, click on the airlock to open the panel and expose the wiring
# With multitool, wirecutters, or an empty hand, click on the airlock to access the wiring.
# Fiddle with the wires by pulsing to test each one and cutting what you need to.
#* '''ID wire''': ''Pulsing'' will flash the 'access denied' red light; ''cutting'' will prevent anyone from opening or [[emag]]ging the door if it's a restricted door; otherwise, it does nothing.
#* '''AI control wire''': ''Pulsing'' will flash the 'AI control light' off and on quickly; ''cutting'' will prevent the AI from accessing the door unless s/he hacks the power wires
#* '''Main power wire''': ''Pulsing'' will turn off the 'test light' and kill the power for 1 minute; ''cutting'' will kill the power for 10 seconds before backup power kicks in.
#* '''Backup power wire''': ''Pulsing'' will turn off the 'test light' kill the power for 1 minute '''only if''' the main power is out, otherwise, nothing. ''Cutting'' will obviously disable the backup power.
#* '''Bolt control wire''': ''Pulsing'' will toggle the bolts; ''cutting'' will drop the bolts.
#* '''Door control wire''': If the door is ID restricted, this is pretty much useless. If not, ''Pulsing'' will open/close the door and ''cutting'' will keep it that way, sort of like bolting.
#* '''Electrifying wire''': ''Pulsing'' will electrify the door for 30 seconds; ''cutting'' will permanently electrify it until mended. You can find the wire easily because the door shoots sparks when pulsed or cut. Obviously useless if there is no power to the door.
#* '''Safety Wire:''' ''Pulse'' to toggle, ''Cut'' to disable. Disabling the safeties will cause the door to crush anyone standing in it when it tries to close. Causes minor brute damage per crush. (But knocks you down! Slow and lethal if wearing hardsuits/space suits.)
#* '''Timing Wire''' ''Pulse'' to toggle, ''Cut'' to override. Overriding the timing will cause the door to automatically close almost immediately after opening.
# Screwdriver the door again to shut the panel. Otherwise, trying to open the door will always give you the wiring popup.


====Airlock Strategies====
[[File:Signaler.png|link=Signaler]] '''[[Signaler]]''' can be used as a ghetto alternative to a Multitool and to pulse wires remotely. Attach one to a wire, then use a second signaler to pulse that wire.
* '''Ghetto hacking''' involves accessing a useless airlock and cutting all of the wires in order until the bolts drop, making a note of the wire you just cut. Keeping this in mind, you can now open restricted doors by cutting all the wires except the bolt control and then crowbarring that fucker open. Useful if you don't have a multi-tool. Note that this is a bad idea if you lack gloves.
* '''Open ID restricted doors''' by pulsing a main power wire and then crowbarring it open. If it's bolted, be sure to pulse the bolt wire before you kill the power or you're shit outta luck for a minute. (You can shorten this by cutting and mending the power wire, but by then the power would probably have reset anyway. Still, taking 20 seconds less to unhack the Escape shuttle doors is always good)
* '''Create a pain in the ass obstacle''' by dropping the bolts, cutting all the wires, and then welding the door shut. This is especially effective if you happen to have the only pair of insulated gloves on the station.
* '''Remotely pulse an airlock''' by attaching a signaler, which when signaled pulses the wire it's attached to. This allows you to remotely bolt and unbolt a door, for instance. Be sure to turn off the speaker so no one can hear it being toggled.
* '''Use multitools for bolted ''' as they are awesome. First find two wires of importance. The bolts wire, and the main power wire. Pulse a random door to find out the wires. If you hear sparks, see your health going down or see the message "You feel a powerful shock coursing through your body!", close that hacking window and move onto another door. Once you got the main power wire, head to an unbolted door, pulse the wire, crowbar it open. You get a larger window of time to crowbar, and you can do it without gloves. If a door is bolted, pulse the bolts wires, and go and cut the power then crowbar it.


===[[APC]]===
[[File:Blueprint.png|link=Station blueprints]] '''[[Station blueprints]]''' for easy peasy wire identification. If you can get it, it contains a map of all the hackable wires when read. It will remove the need for testing wires to find their function.
[[File:APC2.gif|50px|link=APC]]
== Hackables ==
=== [[File:door.png|64px|link=Airlock]] [[File:glassdoor.png|64px|link=Airlock]] [[File:Airlock2.png|64px|link=Airlock]] [[Airlock]]s ===
Both internal and external access airlocks are hackable. Wires are randomized for each airlocks on the station. Remember, cutting power to the door will stop everything else from working.
# [[Engineering_items#Screwdriver|Screwdriver]] [[File:Screwdriver_tool.png]] in hand, click on the airlock to open the panel and expose the wiring.
# With [[Engineering_items#Multitool|multitool]] [[File:Multitool.png]], [[Engineering_items#Wirecutters|wirecutters]] [[File:Wirecutters.png]], or an empty hand, click on the airlock to access the wiring.
# Hold a [[Engineering_items#Multitool|multitool]] [[File:Multitool.png]] in your active hand and click "pulse" to pulse a wire, or hold [[Engineering_items#Wirecutters|wirecutters]] [[File:Wirecutters.png]] and click "cut" to cut a wire.
# [[Engineering_items#Screwdriver|Screwdriver]] [[File:Screwdriver_tool.png]] the door again to shut the panel.
* There are two main power wires and two auxiliary power wires.
* Disabling any main power wire (by pulsing or cutting) will make the backup (auxiliary) power work after 10 seconds. Disabling both a main and an auxiliary power wire will make door lose power until either main or auxiliary power is restored.
** If the door is unpowered, it can be opened with a [[Engineering_items#Crowbar|crowbar]] [[File:Crowbar.png]], unless the bolts are down.
* Disabling AI connection will make [[AI|AI]] and [[Cyborg|Cyborgs]] unable to interact with this door. [[AI|AIs]] can still hack a door by clicking it. It takes around a minute, and once the door is hacked, they'll be able to use it forever, even without AI connection wire.
*All wires on airlocks will shock if cut without protection.
*Pulsing wires has no effect if the door is currently without power.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Main Power
|Disables main power. ||Restores main power. May shock you, but does not electrify door.||Disables main power for 1 minute (not refreshable from pulsing until on again).
|-
!Auxiliary Power
|Disables auxiliary power. May shock you, but does not electrify door.||Restores auxiliary power. May shock you, but does not electrify door.||Disables auxiliary power for 1 minute (not refreshable from pulsing until on again).
|-
!ID Scan
|Door rejects everyone. Makes it so pulsing the "open" wire will open the door.||Restores normal ID-checks.||Flashes lights on the door, as if someone without access tries to open it.
|-
!Bolts
|Drops door bolts.||Just shocks, does nothing else||Drops door bolts if they are up. Raises them if they are down and door is powered.
|-
!Bolt Lights
|Disables the red bolt lights. Only testable if bolts are down.||Enables bolt lights.||Toggles bolt lights.
|-
!Open
|Nothing.||Nothing.||Opens the door if it either requires no access or if ID scan wire has been cut.
|-
!AI Connection
|Disables AI control.||Restores AI control.||''Very briefly'' disables AI control.
|-
!High Voltage Ground (the "shock" wire)
|Electrifies the door.||De-electrifies the door.||Electrifies the door for 30 seconds.
|-
!High Voltage Circuit (2 wires)
|Just shocks, does nothing else||Just shocks, does nothing else||Shocks user
|-
!Safety
|Disables safety, letting the door crush people when it closes.||Enables safety.||Toggles safety.
|-
!Timing
|Causes the door to close almost instantly after opening.||Restores.||Toggles door timing.
|-
!Nothing (dud)
|Just shocks, does nothing else||Just shocks, does nothing else||Nothing.
|}
{| class="wikitable" style="text-align:center"
|+Status window at bottom when hacking
!Name
!Status
!Means
|-
!rowspan="2"|Bolts
|The door bolts look up.||Door bolts are up (not locked).
|-
|The door bolts have fallen!||Door bolts are down (locked).
|-
!rowspan="2"|Power
|The test light is on.||Door is powered.
|-
|The test light is off.||Door is not powered (can be opened with [[Engineering_items#Crowbar|crowbar]] [[File:Crowbar.png]]).
|-
!rowspan="2"|AI Connection
|The AI connection light is on.||AI can control the door and hasn't hacked it.
|-
|The AI connection light is off.||AI either hacked a door or can't control it.
|-
!rowspan="2"|Safety
|The 'Check Wiring' light is on.||Door safety is off (can crush people).
|-
|The 'Check Wiring' light is off.||Door safety is on (can't crush people).
|-
!rowspan="2"|Timer<br>(Has no hackable wire)
|The timer is powered on.||Door closes automatically.
|-
|The timer is powered off.||Door doesn't close automatically.
|-
!rowspan="2"|Timing
|The speed light is on.||Door timing is normal (closes after a delay).
|-
|The speed light is off.||Door timing is reduced (closes without delay).
|-
!rowspan="2"|Emergency light<br>(Has no hackable wire)
|The emergency light is on.||Emergency access is enabled (no access restrictions).
|-
|The emergency light is off.||Emergency access is disabled (normal access restrictions).
|}
====Airlock Difficulties====
Airlocks have 6 levels of difficulty levels. These changes the number and kinds of wire an airlock has and also label some wires for the easier ones, allowing you to know what the wires are in advance.
* '''None''': 4 power wires, 0 shock wires, 0 dud wires, Labelled wires: Open, Bolts, Shock, Safety, Timing.
* '''Basic''': 4 Power wires, 0 shock wires, 1 dud wire, Labelled wires: Safety, Timing.
* '''Protected''': 4 power wires, 1 shock wire, 1 dud wire.
* '''Advanced''': 4 power wires, 1 shock wire, 2 dud wires.
* '''Elite''': 4 power wires, 2 shock wires, 2 dud wires.
* '''Maximum''': 2 power wires, 2 shock wires, 2 dud wires.


Used to control power to a certain room. Nice to know when a rogue AI or douchebag engineers keep turning off your power. All APC breakers can be accessed via Power Monitoring Computers regardless of the lock status, so hope that whoever's fucking with the power isn't paying attention
# Screwdriver in hand, click on APC to open the panel and expose the wiring
# Click with an empty hand to access the wiring
# Fiddle with the wires by pulsing to test each one and cutting what you need to.
#* '''ID lock wire''': ''Pulse'' will toggle the lock on the APC for a short duration. ''cutting'' will disable toggling the lock with an ID card.
#* '''Power wires (2)''': ''Pulse'' will short out the APC. You must ''cut and mend'' the wire to restore power. Not repairing the short will render the main breaker moot, even if accessed remotely.
#* '''AI control wire''': Like the airlock, ''pulsing'' will flash the light off and on quickly; ''cutting'' will disable AI control
# Screwdriver it back up to toggle lighting, equipment, and atmospherics as you see fit (unless you've killed the power)


===[[Autolathe]]===
==== Airlock Strategies ====
[[File:autolathe.png|50px|link=Autolathe]]
* '''Use [[Engineering_items#Multitool|multitool]] [[File:Multitool.png]] to bolt doors open'''. Pulse the power wire, [[Engineering_items#Crowbar|crowbar]] [[File:Crowbar.png]] it open, then pulse the bolt wire. This will permanently bolt the door open, until someone fixes it. If a door is bolted, pulse the bolts wire, and go and then a power wire to be able to [[Engineering_items#Crowbar|crowbar]] [[File:Crowbar.png]] it.
*Start pulsing top to bottom. Look at the "test light" as you pulse. If it switches to off you did it. Just crowbar it open. If you hit the bolt wire pulse it again to lift the bolts.
* '''Use [[Engineering_items#Multitool|multitool]] [[File:Multitool.png]] to make the door stay open for a minute. '''Do this by first finding and pulsing a main power wire, then wait 10 seconds to see if auxiliary power turns on. If it doesn't go to another door and pulse the main power wire there. When auxiliary power is on (test light on), pulse wires until it turns off again. You have now found an auxiliary power wire. Then go to the door you wish to hack, pulse both the main and auxiliary power wire, then [[Engineering_items#Crowbar|crowbar]] [[File:Crowbar.png]], and it will stay open at at least nearly a minute.
* '''Ghetto hacking''' involves accessing a useless airlock and cutting all of the wires in order until the bolts drop, making a note of the wire you just cut. Keeping this in mind, you can now open restricted doors by cutting all the wires except the bolt control and then crowbarring that fucker open. Useful if you don't have a multi-tool. Note that this is a bad idea if you lack gloves.
* '''Open ID restricted doors''' by pulsing a main power wire and then crowbarring it open. If it's bolted, be sure to pulse the bolt wire before you kill the power, since you can't bolt/unbolt an unpowered door.
* '''Create a pain-in-the-ass-obstacle''' by dropping the bolts, cutting all the wires, and then welding the door shut. This is especially effective if you happen to have the only pair of insulated gloves on the station.
* '''Remotely pulse an airlock''' by attaching a [[General_items#Remote_Signaling_Device|signaler]], which when signaled pulses the wire it's attached to. This allows you to remotely bolt and unbolt a door, for instance.


''I NEED 50,000 RCDS STAT''
# Click on the autolathe to open it
# Click on the autolathe with a screwdriver in hand to access the wiring, then get a tool in your hand
# The window is glitched and won't show what wires are cut, so you better track what wires you modify. There are three important wires, which are randomized. Cutting them toggles their light permanently, pulsing does so temporarily(30 secs or something). Red light is power, green light is electrocution and blue is hacked options.
# Have fun accessing some new options
#* RCD supplies
#* Infrared beam (security)
#* Infrared sensor
#* Bullets
#* Other shit


===[[Air Alarm]]/[[Fire Alarm]]===
==== Secure airlocks ====
[[File:AirAlarm.png|50px|link=Air_Alarm]]   [[File:FireAlarm.png|50px‎|link=Fire_Alarm]]
Some airlocks are more secure than normal, and their wire panel is covered by a layer of shielding. To see the airlock's security level, examine it.
 
There are 3 levels of airlock security:<br>
Use wirecutters to enable/disable. Disabled ''Air Alarms'' will show no lights, ''Fire Alarms'' will not automatically trigger firelocks.
* '''Normal security'''
Normal airlocks, they have no additional security.
* '''Medium security'''
To create a medium security airlock, use 2 sheets of '''metal''' on a normal airlock with an open panel.<br>
No change in door resistance.<br>
To access the wire panel, you need to:
# Open the panel with a '''[[Engineering_items#Screwdriver|screwdriver]] [[File:Screwdriver_tool.png]]'''.
# Slice through the wires' protection with a '''[[Engineering_items#Welding_Tool|welding tool]]''' [[File:Welder.png]].
# Proceed as normal.
* '''High security'''
To create a high security airlock, use 2 sheets of '''plasteel''' on a normal airlock with open panel.<br>
Armor is multiplied by 1.5, making the door harder to destroy through brute force.<br>
To access the wire panel, you need to:
# Open the panel with a '''[[Engineering_items#Screwdriver|screwdriver]] [[File:Screwdriver_tool.png]]'''.
# Cut through the '''electrified''' protective grille with '''[[Engineering_items#Wirecutters|wirecutters]] [[File:Wirecutters.png]]'''. If you don't wear insulated gloves, you may get shocked.
# Slice through the outer layer of plasteel using a '''[[Engineering_items#Welding_Tool|welding tool]]''' [[File:Welder.png]].
# Remove the outer plasteel layer with a '''[[Engineering_items#Crowbar|crowbar]]''' [[File:Crowbar.png]].
# Slice through the inner layer of plasteel using a '''[[Engineering_items#Welding_Tool|welding tool]]''' [[File:Welder.png]].
# Remove the inner plasteel layer with a '''[[Engineering_items#Crowbar|crowbar]]''' [[File:Crowbar.png]].
# Proceed as normal.
=== [[File:ModernAPC.png|64px|link=APC]] [[APC]] ===
Controls power to its assigned room. All APC breakers can be accessed via Power Monitoring Computers regardless of the lock status, so hope that whoever's fucking with the power isn't paying attention.
# Screwdriver in hand, click on APC to open the panel and expose the wiring.
# Click with an empty hand to access the wiring.
# Fiddle with the wires by pulsing to test each one and cutting what you need to.
# Screwdriver it back up to toggle lighting, equipment, and atmospherics as you see fit (unless you've killed the power).
* Cover lock prevents the APC from opening. If it's off, you can use a crowbar to open the APC.
* Interface lock prevents anyone from using the APC. It is normally removed by swiping an ID card.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Power (2 wires)
|Disables power. May shock!||Restores. May shock!||Disables power for 2 minutes. You must ''cut and mend'' the wire to restore power.
|-
!ID lock
|Disable toggling the lock with an ID card.||Restores.||Unlocks APC interface for 30 seconds.
|-
!AI control
|Disables AI control.||Restores.||''Very briefly'' disables AI control.
|}
{| class="wikitable" style="text-align:center"
|+Status window
!Name
!Status
!Shows that
|-
!rowspan="2"|Lock
|The interface light is red.||APC is locked.
|-
|The interface light is green.||APC is unlocked.
|-
!rowspan="2"|Power
|The short indicator is on.||APC is not working.
|-
|The short indicator is off.||APC is working.
|-
!rowspan="2"|AI control
|The AI connection light is off.||AI/borgs can't interact with APC.
|-
|The AI connection light is on.||AI/borgs can interact with APC.
|}
=== [[File:autolathe.png|64px|link=Autolathe]] [[Autolathe]] ===
''I NEED 50,000 RCDS STAT!''
# Click on the Autolathe to open it.
# Click on the Autolathe with a screwdriver in hand to access the wiring, then get a tool in your hand.
# There are two important wires, which are randomized, while the rest are duds. Cutting them toggles their light permanently, pulsing does so temporarily (30 secs or something). Red light is power and blue is hacked options. None of them shock you, so they're safe to hack.
Have fun accessing some [[Autolathe|new options]].
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Power (shows red light if off)
|Power off.||Power on.||Short (~30 secs) toggle off.
|-
!Electrocution (shows green light if on)
|Electrocution.||Off.||Short (~30 secs) toggle on.
|-
!Hacked options (shows blue light if on)
|Options on.||Off.||Short (~30 secs) toggle on.
|}
=== [[File:AirAlarm.png|64px|link=Air_Alarm]] [[Air Alarm]] ===
Station flooded with plasma and all of the Atmos Techs and CE are incompetent and/or dead? Best to take matters into your own hands.
#Screwdriver to exposes wires.
#Click to display Air Alarm interface and Wiring interface.
#Three lights:
#*''The Air Alarm is '''locked/unlocked'''.''
#*''The Air Alarm is '''working properly!/offline'''.''
#*''The 'AI control allowed' light is '''on/off'''.''
#Five wires:
#*'''Access wire''': ''Pulsing'' toggles the interface's ID lock. ''Cutting'' locks the interface permanently until ''mended''.
#*'''Syphon wire''': ''Pulsing'' toggles PANIC SYPHON on/off.
#*'''Power wire''': ''Pulsing'' disable the Air Alarm for 30(?) seconds, you can ''cut'' and ''mend'' the wire if in a hurry. ''Cutting'' the disables the Air Alarm until mended.
#*'''AI Control wire''': ''Pulsing'' will disable AI Control for 30(?) seconds. ''Cutting'' the wire disables the AI control until 30(?) seconds after mended.
#*'''Alarm wire''': ''Cutting'' starts the alarm, ''pulsing'' resets the alarm.
#Screwdriver to close wiring.
Disabled ''Air Alarms'' will show no lights.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Power
|Disables power.||Restores.||Disables power. Can be restored with mending.
|-
!Access
|Locks the interface completely until mended.||Unlocks.||Toggles interface ID lock on/off.
|-
!Syphon
|Starts PANIC SYPHON||Nothing||Toggles PANIC SYPHON on/off.
|-
!AI control
|Disables AI control.||Restores after ~30 secs delay.||Temporarily (~30 secs) disable.
|-
!Alarm
|Starts the alarm.||Nothing||Resets the alarm.
|}
=== [[File:Security_Camera.gif|64px|link=Security Camera]] [[Security Camera]]s ===
{{anchor|Cameras}}


===Cameras===
The malfunctioning AI cannot siphon your air if you disable its eyes.
[[File:Security_Camera.gif|50px]]


Used to view rooms from, they also have upgrades which allow them to see through walls, be invincible against EMPs and have a motion detection system.
Cameras do not have a wire panel, simply click on the camera with the tools to hack it.
# With a screwdriver in hand, click on the camera.
# With a screwdriver in hand, click on the camera.
# After opening the panel, use your wirecutter on the camera. You will now get a wire cut menu like the airlock. There are multiple wires to look out for. NOTE: Every camera will have randomized wires.
# You can now do one of two things:
#* '''Power Wire''': ''Cutting'' it will disable the camera, fixing it will enable the camera. ''Pulsing'' toggle the camera on and off.
#* '''Wirecutters''': ''Cutting'' an open camera will disable the camera, ''mending'' it will re-enable the camera.<br> This will make a camera show up as "(deactivated)" in the camera list.<br> The AI will receive a camera alert upon re-activation of a camera.
#* '''Alarm Wire''': ''Pulsing'' causes a harmless beeping sound. ''Cutting'' will trigger an alarm, ''mending'' will cancel the alarm.
#* '''Multitool''': ''Pulsing'' will toggle the camera's vision range from 7 tiles (the default) to 2 tiles. The AI will not receive any alerts.
#* '''Light Wire''': ''Cutting'' this will stop the AI from using the camera's light, ''mending'' will allow the AI to use the camera light. ''Pulsing'' toggles it.
=== [[File:Generic_borg.png|64px|link=Cyborg]][[File:Engborg.png|64px|link=Cyborg]] [[Cyborg|Cyborgs]] ===
#* '''Focus Wire''': ''Cutting'' this will shorten the vision range to a default set of 2 tiles, ''mending'' it will return it back to a normal 7 vision range. ''Pulsing'' it will toggle between the short and normal vision range.
Use these tools in this order to hack a borg:
#* '''Two Nothing Wires''' - They do nothing, still required to deconstruct the camera.
#[[File:Id_regular.png]] ID Card, [[File:Emag.png]] [[Emag]] or just ask the Cyborg to unlock its panel
#[[File:Crowbar.png]] Crowbar the panel open
#[[File:Emag.png]] Optional: [[Emag]] the cyborg and skip to "Afterwards" (does not work if its AI is [[Guide_to_malfunction|malfunctional]])
#[[File:Hud-hands.gif]] Remove the power cell by clicking the borg with an empty hand
#[[File:Screwdriver_tool.png]] Screwdriver to expose wires
#[[File:Wirecutters.png]] Wirecutters or [[File:Multitool.png]] Multitool to manipulate wires
Afterwards:
#[[File:Screwdriver_tool.png]] Screwdriver to cover wires
#[[File:High power cell updated.png]] Replace the power cell
#[[File:Crowbar.png]] Crowbar the panel shut
#[[File:Id_regular.png]] Lock the panel with an ID Card. Cyborgs cannot lock their own panel.
Borgs have seven wires; five working ones and two duds:
{| class="wikitable" style="text-align:center"
!Name
!Purpose
!Cutting
!Mending
!Pulsing
|-
!Law sync module
|Borg laws get updated when their master AI's laws do. Only works when AI link/slaving is active.||Stops the borg from receiving law updates from its AI.||Re-enables LawSync.||Synchronizes laws with the borg's AI. ''Borg gently chimes.''
|-
!Intelligence link
|Slaves the borg to an AI, forcing it to obey its orders. Needed for LawSync.||Unslaves the borg from its current AI and disables LawSync.||Nothing. You have to pulse the wire to slave a borg.||Allows you to pick an AI for the borg to be slaved to.
|-
!Camera light
|Toggles the borg's camera.||Toggles the camera status and kicks out anyone using it.||Same as cutting.||Same as cutting. ''Borg's camera lense focuses loudly.''
|-
!Lockdown indicator
|Locks down the borg. Can also be done with a robotics console.||Enables lockdown.||Disables lockdown.||Toggles lockdown status.
|-
!Reset module hardware
|Resets the borg's module so it can pick another one.||Resets the Cyborg's module and prevents it from selecting a new one.||Allows the borg to pick a new module.||Nothing. ''Borg's module servos twitch.''
|-
!Two dummy wires
|Nothing||---||---||---
|}
An emagged cyborg will have no LawSync or AI link and cannot be reset: it must be deconstructed (or blown) and rebuilt.


You can find a guide to deconstruct cameras [[Guide_to_construction#Security_Camera_2|here]].
Remember, cyborgs are very expensive! Do not destroy them unless the cyborg is completely out of control, and resetting the AI and LawSync status doesn't work.


===[[quartermaster#Requisition_Me_a_Beat(ing)|MULE]]===
It's also a dick move to blow a non rogue borg. Think of it as chopping someone's arms and legs off; you'll get bwoink'd unless you did it for a good reason.
[[File:MULE.gif|50px|link=quartermaster#Requisition_Me_a_Beat(ing)]]
=== [[File:MULE.gif|64px|link=quartermaster#Requisition_Me_a_Beat(ing)]] [[quartermaster#Requisition_Me_a_Beat(ing)|MULEbot]] ===
{{anchor|MULE}}


No better way to get away from it all with a joyride on a MULE! And run over some people with it too.
No better way to get away from it all with a joyride on a MULE! And run over some people with it too.
#Unlock the controls with a Quartermaster's/Cargo Technician's/Head Of Personnel's/Captain's ID.
#Unlock the controls with a Quartermaster's/Cargo Technician's/Head Of Personnel's/Captain's ID.
#Unscrew the maintenance panel with the screwdriver.
#Unscrew the maintenance panel with the screwdriver.
#Pulse various wires with a [[multitool]]. Pay attention to the reaction the MULE gives. Also note that these wires are randomized for each MULE
#See the table below and hack what you want.
##Cutting the wire that causes the loading bay to thunk will remove cargo restrictions.
##Cutting the wire that leads to the safety light will awaken its thirst for blood and cause it to run over people in its path. DO NOT DO THIS UNLESS YOU ARE A TRAITOR OR LOVE GETTING THE SHIT ROBUSTED OUT OF YOU.
##Cutting ''one'' of the wires that makes the motor whine will safely speed up the MULE. Cutting both will immobilize it.
#Screw the panel back on.
#Screw the panel back on.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Power (2 wires)
|One or both cut = disables power.||Restores.||''The charge light flickers.'' -message.
|-
!Motor (2 wires)
|One cut = increases speed slightly. <br>Other cut = increases speed greatly. <br>Both cut = disables motor.||Restores.||''The drive motor whines briefly.'' -message.
|-
!Radio (4 wires)
|One or more cut = disables PDA control.||Restores.||''You hear a radio crackle.'' -message.
|-
!Safety
|Disables safety, awakens thirst for blood. <br>(DON'T DO THIS UNLESS YOU'RE A TRAITOR OR WANT TO DIE)||Restores.||''The external warning lights flash briefly.'' -message.
|-
!Load
|Allows non-standard cargo (people, cyborgs, and other bots).||Disables.||''The load platform clunks.'' -message.
|}
=== {{anchor|Supply Shuttle Console}}[[File:Supply_Shuttle_Console.png|64px]][[Computers#Supply_Shuttle_Console|Supply Shuttle Console]] ===
Who wants to unlock [[Quartermaster#Contraband|contraband]]?


===[[Particle Accelerator]]===
This allows you to both order (for example advanced clowning supplies) and sell (human organs, pet hides) contraband items. This will not unlock as many crates as an [[Emag]].
#[[Guide_to_construction#Computers|Disassemble]] the Supply Shuttle Console with your screwdriver, crowbar and wirecutters
#Grab the supply computer circuitboard
#Multitool it and set its receiver to the appropriate spectrum
#Put it back in and reassemble the console. You can now order and sell contraband!
(Note that contraband is illegal. Security can do whatever they wish to it, and therefore you for bringing it on board)
=== [[File:Requests_Console.gif|64px]][[Computers#Requests_Console|Requests Console]] ===
Unhappy with your requests priority level? Crank it up to 'EXTREME'!
#Crowbar the requests console panel open.
#Use your screwdriver to enable the hidden priority level.
#Close the panel with your crowbar.
=== [[Particle Accelerator]] ===
[[File:ParticleAccelerator.gif|link=Particle_Accelerator]]
[[File:ParticleAccelerator.gif|link=Particle_Accelerator]]


What a better way to release the singularity than to do it REMOTELY! That or you can hack it to make it shoot more powerful particles!


What safer way to release the [[singularity]] than doing it REMOTELY! That, or you can hack it to make it shoot more powerful particles!
#Setup the PA if you haven't already, then use a screwdriver on the computer to open the panel/expose the wires.
#Setup the PA if you haven't already, then use a screwdriver on the computer to open the panel/expose the wires.
#Now click on the computer with a hand to bring up the wire menu. Here you can then get your tools in hand.
#Now click on the computer with a hand to bring up the wire menu. Here you can then get your tools in hand.
#*'''Toggle wire''': ''Pulsing'' toggles the PA on or off, ''cutting'' it will disable the PA and stop it from turning on.
#*'''Power wire''': ''Pulsing'' toggles the PA on or off, ''cutting'' it will disable the PA and stop it from turning on.
#*'''Strength wire''': ''Pulsing'' increases the strength of the PA, ''cutting'' it will set the strength to 0 and prevent people turning it up.
#*'''Strength wire''': ''Pulsing'' increases the strength of the PA, ''cutting'' it will set the strength to 0 and prevent people turning it up.
#*'''Interface wire''': Interface wire will stop people being able to use the control computer. ''Pulsing'' will toggle this, ''cutting'' will turn it off until mended.
#*'''Interface wire''': Interface wire will stop people being able to use the control computer. ''Pulsing'' will toggle this, ''cutting'' will turn it off until mended.
#*'''Limit wire''': ''Cutting'' will allow the PA to be turned up to strength 3. When ''pulsed'' it will beep.
#*'''Limit wire''': ''Cutting'' will allow the PA to be turned up to strength 3. When ''pulsed'' it will make a large whirring noise.
#*'''Nothing wire''': Will do nothing, it's just here to make it harder.
#*'''Nothing wire''': Will do nothing, it's just here to make it harder.
#Close the panel for the PA to then work again. '''IMPORTANT:''' Don't forget to scan the parts again.
#Close the panel for the PA to then work again. '''IMPORTANT:''' Don't forget to scan the parts again.
 
You can also attach a [[Signaler]] to these wires to release the singularity, such as remotely pulsing the strength wire. Bonus points if you also pulse the interface wire so that people can't stop it!
Now remember, you can attach a [[Signaler]] to these wires to release the [[singularity]], such as remotely pulsing the strength wire. Bonus points if you also pulse the interface wire so that people can't stop it!
{| class="wikitable" style="text-align:center"
 
|+Wires
===Syndicate Bomb===
!Name
 
!Cutting
A bomb! Are you a bad enough dude to attempt to defuse a live explosive that, if it should explode, will reduce you to a fine red mist?
!Mending
 
!Pulsing
|-
!Power
|Disables power.||Restores.||Toggles power on/off.
|-
!Strength
|Sets strength to 0 and prevents people from turning it up.||Restores.||Increases the strength.
|-
!Interface
|Stops people from being able to use the control computer.||Restores.||Toggles interface off/on.
|-
!Limit
|Allows PA to be turned up to strength 3.||Restores.||Makes a large whirring noise.
|-
!Nothing
|Nothing.||Nothing.||Nothing.
|}
==== How To ====
# Set up the Particle Accelerator
# Screwdriver the monitor open
# Pulse the wires from up to down until you get the prompt stating that there's a whirring sound
# Cut the wire which prompted the statement
# Pulse the wires from up to down except for the limit wire
# Set up the tesla
Can easily be done in <30 seconds
=== [[File:Emitter_On.gif|64px]] Particle Emitter ===
There is only one wire: Pulse it to fire the emitter.
=== [[File:Syndicate_Bomb.gif|64px|link=Syndicate Bomb]] [[Syndicate Bomb]] ===
A bomb! Are you a bad enough dude?
# Check the description of the bomb to see if you have enough time left to even attempt a defusal. Use your best judgement for how much time you will need.
# Check the description of the bomb to see if you have enough time left to even attempt a defusal. Use your best judgement for how much time you will need.
# If the timer is very long you might want to ask toxins for a bomb suit in case you fail, you'll still be killed, but at least you'll leave a corpse
# If the timer is very long, you might want to ask toxins for a bomb suit in case you fail. You'll still be killed, but at least you'll leave a cloneable corpse.
# Screwdriver in hand, click on the bomb to open the panel and expose the wiring
# Screwdriver in hand, click on the bomb to open the panel and expose the wiring.
# With multitool, wirecutters, or an empty hand, click on the bomb to access the wiring.
# With multitool, wirecutters, or an empty hand, click on the bomb to access the wiring.
# CAREFULLY fiddle with the wires by pulsing to test each one and cutting what you need to.
# CAREFULLY fiddle with the wires by pulsing to test each one and cutting what you need to.
Line 117: Line 410:
#* '''Bolt wire''': ''Pulsing'' will hint at this wire's function, ''cutting'' will release the bolts holding the bomb down if they were activated to begin with. Ditch that bomb!
#* '''Bolt wire''': ''Pulsing'' will hint at this wire's function, ''cutting'' will release the bolts holding the bomb down if they were activated to begin with. Ditch that bomb!
#* '''Delay wire''': ''Pulsing'' will add time to the clock of the bomb, giving you a little more breathing room.
#* '''Delay wire''': ''Pulsing'' will add time to the clock of the bomb, giving you a little more breathing room.
#* '''Proceed wire''': ''Pulsing'' will reduce the clock, making your life that muich harder. ''Cutting'' this wire while the bomb is live will explode the bomb!
#* '''Proceed wire''': ''Pulsing'' will reduce the clock, making your life that much harder. ''Cutting'' this wire while the bomb is live will explode the bomb!
#* '''Activate wire''': ''Pulsing'' a bomb that isn't live will start the countdown and ''cutting'' a bomb that IS live will stop the countdown. If you've identified this wire, you've won!
#* '''Activate wire''': ''Pulsing'' a bomb that isn't live will start the countdown and ''cutting'' a bomb that IS live will stop the countdown. If you've identified this wire, you've won!
 
Keep in mind that randomly cutting live bomb wires carries a 40% risk of sudden death when pulsing carries just a 20% risk of sudden death! Ultimately you will HAVE to cut a wire to stop the explosion, but with a little research with pulsing you can improve your success rate. There's a test bomb in the armory if you want to practice without the risk of boom.
Keep in mind that randomly pulsing a live bomb carries a 20% risk of sudden death, but randomly cutting carries a 40% risk. Ultimately you will HAVE to cut a wire to stop the explosion, but with a little research with pulsing you can improve your success rate.
{| class="wikitable" style="text-align:center"
 
|+LIVE Bomb Wires
==Minor Hackables==
!Name
I haven't a clue why you'd ever want to hack any of these things, but you can!
!Cutting
 
!Mending
===Radio/Headset===
!Pulsing
[[File:Station_Bounced_Radio.png|50px|link=Station_Bounced_Radio]]    [[File:Headset.png|50px|link=Radio Headset]]
|-
 
!Activate
# Screwdriver in hand, click on the offending radio so it can be modified or attached
|Stops the countdown.||Nothing.||Adds time to the timer. "The bomb seems to hesitate for a moment."
# The usual radio use panel will pop up, but now with access to the wiring. If you've closed it by accident, just click on the radio as if you were going to change the settings on it.
|-
# There are three wires. Two have apparent uses; the third is pretty much useless.
!Delay
#* '''Output wire''' will disengage the speakers (or signal-receiving on a signaler)
|Nothing.||Nothing.||Adds time to the timer. "The bomb chirps."
#* '''Input wire''' will permanently disengage the microphone (or signal-sending on a signaler)
|-
Interestingly, tracking beacons and station intercoms also count as radios.
!Bolt
 
|Releases the bolts (if they were activated) so that the bomb can be moved.||Nothing.||"The bolts spin in place for a moment."
===Secure Briefcase, Safes===
|-
[[File:secure.png|50px]]   [[File:safe.png|50px]]
!Proceed
 
|Explodes.||Nothing, u ded.||Reduces time on the timer! "The bomb buzzes ominously!"
''seriously who is dumb enough to use these things anyway god damn''
|-
#Screwdriver in hand, click on the (briefcase/safe) to open the panel and expose the wiring
!Boom
#Multi-tool-spam the (briefcase/safe) until you get a confirmation that the memory is reset.
|Explodes.||Nothing, u ded.||Explodes.
#The memory is now reset. Punch in your favorite code and hit E to set it.
|}
#Screwdriver the panel shut.
{| class="wikitable" style="text-align:center"
 
|+NOT LIVE Bomb Wires
===[[Vending machines]]===
!Name
[[File:Vendboozeomat.gif|50px]] [[File:Vendsnack.gif|50px]] [[File:Vendcoffee.gif|50px]]
!Cutting
 
!Mending
!Pulsing
|-
!Activate
|Nothing.||Nothing.||Starts the countdown.
|-
!Delay
|Nothing.||Nothing.||"The bomb chirps."
|-
!Bolt
|Releases the bolts (if they were activated) so that the bomb can be moved.||Nothing.||"The bolts spin in place for a moment."
|-
!Proceed
|Nothing.||Nothing.||"The bomb buzzes ominously!"
|-
!Boom
|Makes the bomb unusable.||Restores.||Nothing.
|}
====How to remove a bomb payload====
To remove the payload from a syndicate bomb (or bomb assembly crafted from 10 plasteel) follow these steps:
#Make sure the bomb is not active. If it's counting down, cutting wires can make it explode.
#Open the bomb with a [[Engineering_items#Screwdriver|screwdriver]] [[File:Screwdriver_tool.png]].
#Click the bomb with [[Engineering_items#Wirecutters|wirecutters]] [[File:Wirecutters.png]] and cut all wires.
#Use a [[Engineering_items#Crowbar|crowbar]] [[File:Crowbar.png]]on the bomb to pry out the payload.
=== [[File:C4.gif|64px|link=Syndicate_Items#Plastic_Explosive_charge_(C4)]] [[Syndicate_Items#Plastic_Explosive_charge_(C4)|Plastic Explosives (C4)]]===
For an awesome way to go out! These do not need to be opened with a screwdriver first.  
#Only has one type of wire:
#*'''Explode wire''': When ''cut'', it explodes. When ''pulsed'', it explodes!
You can attach a [[Signaler]] to make a remote bomb.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Explode (2 wires)
|Explodes.||Nothing.||Explodes.
|}
=== [[File:Vendboozeomat.gif|64px|link=Vending machines]] [[File:Vendsec.gif|64px|link=Vending machines]] [[File:Vendmed.gif|64px|link=Vending machines]] [[File:Vendcoffee.gif|64px|link=Vending machines]] [[Vending machines|Vending Machines]] ===
The only thing worth hacking!
The only thing worth hacking!
 
#Click on the vending machine to open it.
#Click on the vending machine to open it
#Click on the vending machine with a screwdriver in hand to access the wiring, then get a tool in your hand.
#Click on the vending machine with a screwdriver in hand to access the wiring, then get a tool in your hand
#Button to toggle speaker on/off.
#Button to toggle speaker on/off.
#Four lights:
#*''The orange light is off.''Indicates the machine is electrified when on.
#*''The red light is '''blinking/off'''.'' Blinking indicate that it is working normally, off means it's in firing mode.
#*''The green light is '''off/on'''.'' Indicate that contraband is available when on.
#*''A '''purple/yellow''' light is on.'' Purple means access restrictions are on. Yellow means anyone can access.
#Four wires:
#Four wires:
#*'''Firing wire''': If ''pulsed'' will fire stuff at people. ''Cutting'' causes machine to fire stuff at people contentiously. Controlled by the blinking light.
#*'''Firing wire''': If ''pulsed'' will fire stuff at people contentiously until pulsed again. ''Cutting'' causes machine to fire stuff at people contentiously until mended. Toggles the red blinking light off when in firing mode.
#*'''Contraband wire''': ''Cutting'' does nothing, when ''pulsed'' toggles availability of illegal or rare goods.
#*'''Contraband wire''': ''Cutting'' does nothing. When ''pulsed'' toggles availability of illegal or rare goods, also toggles the green light on/off.
#*'''Access wire''': When ''cut'' it turns on a orange light, allowing for ID restricted machines (med machines, sec machines, and the bartenders Booze-o-mat) to be used by anyone.
#*'''Access wire''': When ''pulsed'' it toggles the purple/yellow light, allowing for ID restricted machines (med machines, sec machines, and the bartenders Booze-o-mat) to be used by anyone when the yellow light is on.
#*'''Shock wire''': Like the firing wire in effects from hacking, except it shocks instead of shoots. Something worth noting is that pulsing this wire shocks anyone without gloves in front of it. Very deadly.
#*'''Shock wire''': Like the firing wire in effects from hacking, except it shocks instead of shoots, and toggles the orange light on. Pulsing this wire electrifies the machine for 30 seconds.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Firing
|Causes the machine to fire stuff at people (turns off red blinking light).||Restores.||Toggles firing on/off.
|-
!Contraband
|Nothing.||Nothing.||Toggles illegal/rare goods availability on/off (shown by a green light).
|-
!Access
| Activates the access restriction.||Nothing||Toggles the access restriction(purple/yellow light).
|-
!Shock
|Causes the machine to electrocute people (shown by an orange light).||Restores.||Electrifies the machine for 30 seconds.
|}
=== [[File:secure.png|64px]] [[File:safe.png|64px]] Secure Briefcase, Wall Safe ===
#Screwdriver in hand, click on the (briefcase/safe) to open the panel and expose the wiring
#Multitool the (briefcase/safe) until you get a confirmation that the memory is reset.
#Screwdriver the panel shut.
#If the briefcase/safe is either in its default state or its memory has been reset it will say ENTER NEW PASSCODE. Punch in a 5-digit code and click E to set it.
#Punch the same code and click E to unlock.
<br>
Click R to lock it. Locking works even if no code has been set. You can set a new code with the above steps even if it's locked. Alt-click an unlocked briefcase/safe to open it.
=== [[File:Vaultsafe.png|64px]] Safe ===
A safe can be opened by doing the following while holding a [[stethoscope]]:
# Spin the dial in one direction until you hear a "tink", "krink", or "plink" from the safe.
# Spin the dial in the other direction until you hear a "tonk", "krunk", or "plunk" and a "Spring", "Sprang", "Sproing", "Clunk", or "Krunk" from the safe.
# Open.
=== [[File:Station_Bounced_Radio.png|64px|link=Station_Bounced_Radio]] [[File:Wallradio.png|64px|link=Intercom]] [[Station_Bounced_Radio|Radio]]/[[Intercom]] ===
# Screwdriver in hand, click on the radio.
# The usual radio use panel will pop up, but now with access to the wiring.
# Three wires:
#* '''Output wire''': ''Pulsing'' toggles the speaker on/off. ''Cutting'' disables the speaker without showing it.
#* '''Input wire''': ''Pulsing'' toggles the microphone on/off. ''Cutting'' disables the microphone without showing it.
#* '''Dummy wire''': ''Pulsing'' turns the microphone and speaker off, but turns them on if they are both off already. ''Cutting'' does nothing.
# Screwdriver again to close the wires.
Interestingly, [[Tracking Beacon]]s also count as radios.
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Output
|Disables speaker.||Restores.||Toggles speaker on/off.
|-
!Input
|Disables microphone.||Restores.||Toggles microphone on/off.
|-
!Dummy
|Nothing.||Nothing.||Toggles both the microphone and speaker on/off.
|}
=== [[File:Security_Gas_Mask.png|64px|link=Security_gas_mask#Security_Gas_Mask]] [[Security_gas_mask#Security_Gas_Mask|Security Gas Mask]] ===
Security Gas Mask has a hidden aggressiveness setting. Higher aggressiveness equals meaner "shitcurity" shouts coming out when the HALT-feature is used.


===[[Syndicate_Items#Plastic Explosive charge (C4)|Plastic Explosives]]===
Use a screwdriver to change it from lowest (first) to highest (last) setting. For maximum aggressiveness, use wirecutters. Note that this can't be reset once you wirecut it.
[[File:C4.gif|50px]]


For an awesome way to go out!
Turn the setting to BEEPSKY MODE by using an [[File:Emag.png]] [[Emag]].
 
=== [[File:Suit_Storage_Unit.png|64px|link=Suit Storage Unit]] [[Suit Storage Unit]] ===
#One wire.
The thing nobody remembers <s>to check</s>.
#*'''Explode wire''': When ''cut'', it explodes. When ''pulsed'', it explodes!
 
You can attach a [[Signaler]] to make a remote bomb.


Open the storage unit's maintenance panel with a screwdriver and two things can be changed:
# Pressing the button next to the green LED light will turn the safety off, allowing you to cram a body in.
# The UV energy dial can be cranked up from the original 15nm to 185nm, completely frying the contents of the storage to a crisp. Which may include the aforementioned body.
=== [[File:Scanner.gif|64px]] DNA Scanner ===
# Open maintenance panel with a screwdriver
# Use a multitool or wirecutters to access wiring
{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!ID Scan
|Disables access checks on connected console.||Restores.||Temporarily disables access checks on connected console.
|-
!Bolts
|Prevents locks being toggleable from DNA console.||Restores.||Toggles scanner locks.
|-
!Open
|Bolts open the scanner.||Nothing.||Opens/closes the scanner if it isn't locked.
|-
!Irradiate
|Disables scanner and irradiates.||Restores and irradiates.||Irradiates.
|-
!Shock (2 wires)
|High chance to shock.||High chance to shock.||Chance to shock.
|-
!Nothing (2 wires)
|Nothing.||Nothing.||Nothing.
|}
=== [[File:Tesla_coil.gif|64px]] Tesla Coil ===
Only one wire: Pulse it to trigger a tesla shock. Great if you attach a remote signaler!
==Tips==
* You can get 1000 watt powercells out of space heaters for your evil needs.
* Hacking doors: Cutting the power wire does 10 seconds to back up power. But pulsing also switches to back up power after 10 seconds, meaning if you want to open the same door for your exit you need to pulse the BACKUP wire to interrupt power. It switches back to primary after 1 minute again. Best thing is to pulse both the primary and backup then crowbar - that should give you the old style 1 minute window.
* To restore primary power to a door immediately, cut then mend the primary power wire. Cutting + mending is incredibly useful when you've accidentally electrified a door, or shorted APC power.
* Use screwdriver on mousetrap, attach to an igniter instead of a timer when making a grenade assembly, you've just made a landmine. Combine with a 100-100 potassium-water mix and anyone who steps on it will regret it.
* Singularity’s EMP can be abused to short out lockers.
* Inject plasma into a battery and insert it into a stun baton/prod. The next time someone attacks with the baton on it will blow up on them, seriously wounding both the holder and the stun target. Doing it with a high capacity battery or better will create a blast strong enough to turn the floor under the attacker to space, which will suck in the people caught in the blast and crit them before they can wake up. Use it as a suicide weapon or place it in the halls for some gullible fool to get himself killed with <s>if you want to be banned</s> '''if you're an antagonist.'''
* You can emag the light replacer, which causes all of the lights to be filled with plasma which will ignite if the light bulb's turned on.
* There is a single power cable supplying the entire station with power. If you don't feel like spending crystals for a power sink and you don't get seen for a minute near engineering, you can disable the power grid so that only very competent engineers will spot your sabotage. Though this only works if the solars aren’t set up.
* You can emag buttons to remove access restrictions.
* Wall-mounted flashers and portable flashers can be disabled with wirecutters.
* If you screwdriver a heater you can take out its really crappy battery or adjust the temperature it outputs. The highest setting, 90 C, will actually hurt people extremely slowly if they aren't wearing internals.
* You can screwdriver Detectives revolver and load .357 in it, but you can get blown up by this revolver. ADDED: Remember to unload the thing while you're doing it, or you'll shoot yourself in a similar manner to sawing a loaded shotgun.
* As a traitor engineer, you could easily do the following:
*# Go to a room, like a construction room, and find the APC's wire that shorts out the power.
*# Grab two signalers and adjust their frequencies.
*# Go to telecomms, in a hardsuit, and attach a signaler to the APC's power wire, which you found before. Close the APC and leave no traces.
*# You can now disable comms any time you want for a few minutes - and unless someone checks the APC and/or doesn’t look too closely or asks the AI, they will think it was an ionospheric anomaly. HONK.
* A good way to manually disable tcomms temperately is to set the filtering frequency on the hub to some number like 0.1. It'll block everything and most engineers don't know how to fix it.
* If you want tcomms down for good, disconnect the network links. There are -very- few engineers who can fix that, and it'll take over ten minutes if they're experienced with how tcomms works. It'll probably force a shuttle call.
* Another thing that can break tcomms: changing network of the machinery. It also breaks all links. Especially if you change it from tcommsat to something like tcomms or tcommsats, which is not that obvious when you take a look at it without knowing what is the issue. And even if they relink everything again it won't work. And then even if they realize that the problem is with the network name, when they change it back, it will reset all the links again!
* If you see a pAI with a great reputation who you like, and someone else has claimed it first, use an emag to unbind it.
* If someone is hacking a door and you want to keep them from following you, and you know all or most of the wires:
# Cut 1-3 useless wires (typically some combination of Door Control, ID Wire, Timing, Safety)
# Cut the bolt lights wire
# Cut the bolts wire
# Cut every other wire except the shock wire
# Cut the shock wire
:This makes it incredibly obnoxious to follow you - if they don't know the wires and don't have insulated gloves, they're SOL because even the AI can't help them pursue.
* Cutting the shock wire doesn't shock you, as far as I have been able to tell. Mending it, on the other hand....
* If you want to test hacking doors without pissing off sec for breaking in somewhere and you have maint, you can make your own airlock with the aux tool storage thing and make it somewhere obscure.
* Put bombs in the backpacks of brain-dead or catatonic people. ADDED: Advanced version: Get mouse traps, connect one with signaler with set frequency, then make a bomb with signaler on the same frequency. Put both in backpack. Wear it or leave it somewhere/on someone. ADDED: Wizard Mode: Take your 6 max cap bomb and build 6 voice analyzers from an autolathe. Set the trigger words to "Pete", "beat", "chick", "chicky", "boom". Find 6 station bound radios, and place each of them in a backpack with a corresponding bomb hidden about the station. Sing the song that ends the station.
* The secret to hacking syndi bombs effectively is to remember that the only wire that doesn't do anything on pulse when the bomb isn't live is the boom wire (aka the one to attach a signaler to after you start the countdown for 4 hours then call attention to it).
* You can wrench syndibombs to the ground so they can't be immediately picked up and spaced.
* Deactivating cameras has them show up as (Deactivated) to anybody scrolling through cameras, but disassembling them completely removes them entirely from the list.
* You can make remote voice-activated bombs:
*# Attach Voice Analyzer with a Remote Signalling Device and set a frequency and a code-phrase.
*# Make a grenade or a bomb, but instead of an igniter+timer, use an igniter+signaller and set it on the same frequency of your voice signaller.
*# Now the grenade/bomb will blow up once you speak the code-word!
* On a similar note, you can keep a 'revenge bomb' on you using a voice analyzer. If someone manages to send you in crit, you can whisper the code-word with your last breath (using '#'), to activate the bomb, and make your killer regret his actions.
[[Category:Guides]]
[[Category:Guides]]

Latest revision as of 00:21, 23 June 2023

Your tools

Insulated Gloves for mitigating shocks. Hackables have power lines, and cutting/pulsing these without gloves can and will harm you. It's possible to hack without them, but it will be slow, painful, and you'll need ointment. Alternatively you can drink Grey Bull, which makes you immune to shocks for a short while.

Screwdriver for opening up panels and the like. A necessary tool.

Wirecutters for cutting and mending wires.

Multitool for pulsing wires. Not necessary for most hacking, but makes life a lot easier.

Signaler can be used as a ghetto alternative to a Multitool and to pulse wires remotely. Attach one to a wire, then use a second signaler to pulse that wire.

Station blueprints for easy peasy wire identification. If you can get it, it contains a map of all the hackable wires when read. It will remove the need for testing wires to find their function.

Hackables

Airlocks

Both internal and external access airlocks are hackable. Wires are randomized for each airlocks on the station. Remember, cutting power to the door will stop everything else from working.

  1. Screwdriver in hand, click on the airlock to open the panel and expose the wiring.
  2. With multitool , wirecutters , or an empty hand, click on the airlock to access the wiring.
  3. Hold a multitool in your active hand and click "pulse" to pulse a wire, or hold wirecutters and click "cut" to cut a wire.
  4. Screwdriver the door again to shut the panel.
  • There are two main power wires and two auxiliary power wires.
  • Disabling any main power wire (by pulsing or cutting) will make the backup (auxiliary) power work after 10 seconds. Disabling both a main and an auxiliary power wire will make door lose power until either main or auxiliary power is restored.
    • If the door is unpowered, it can be opened with a crowbar , unless the bolts are down.
  • Disabling AI connection will make AI and Cyborgs unable to interact with this door. AIs can still hack a door by clicking it. It takes around a minute, and once the door is hacked, they'll be able to use it forever, even without AI connection wire.
  • All wires on airlocks will shock if cut without protection.
  • Pulsing wires has no effect if the door is currently without power.
Wires
Name Cutting Mending Pulsing
Main Power Disables main power. Restores main power. May shock you, but does not electrify door. Disables main power for 1 minute (not refreshable from pulsing until on again).
Auxiliary Power Disables auxiliary power. May shock you, but does not electrify door. Restores auxiliary power. May shock you, but does not electrify door. Disables auxiliary power for 1 minute (not refreshable from pulsing until on again).
ID Scan Door rejects everyone. Makes it so pulsing the "open" wire will open the door. Restores normal ID-checks. Flashes lights on the door, as if someone without access tries to open it.
Bolts Drops door bolts. Just shocks, does nothing else Drops door bolts if they are up. Raises them if they are down and door is powered.
Bolt Lights Disables the red bolt lights. Only testable if bolts are down. Enables bolt lights. Toggles bolt lights.
Open Nothing. Nothing. Opens the door if it either requires no access or if ID scan wire has been cut.
AI Connection Disables AI control. Restores AI control. Very briefly disables AI control.
High Voltage Ground (the "shock" wire) Electrifies the door. De-electrifies the door. Electrifies the door for 30 seconds.
High Voltage Circuit (2 wires) Just shocks, does nothing else Just shocks, does nothing else Shocks user
Safety Disables safety, letting the door crush people when it closes. Enables safety. Toggles safety.
Timing Causes the door to close almost instantly after opening. Restores. Toggles door timing.
Nothing (dud) Just shocks, does nothing else Just shocks, does nothing else Nothing.
Status window at bottom when hacking
Name Status Means
Bolts The door bolts look up. Door bolts are up (not locked).
The door bolts have fallen! Door bolts are down (locked).
Power The test light is on. Door is powered.
The test light is off. Door is not powered (can be opened with crowbar ).
AI Connection The AI connection light is on. AI can control the door and hasn't hacked it.
The AI connection light is off. AI either hacked a door or can't control it.
Safety The 'Check Wiring' light is on. Door safety is off (can crush people).
The 'Check Wiring' light is off. Door safety is on (can't crush people).
Timer
(Has no hackable wire)
The timer is powered on. Door closes automatically.
The timer is powered off. Door doesn't close automatically.
Timing The speed light is on. Door timing is normal (closes after a delay).
The speed light is off. Door timing is reduced (closes without delay).
Emergency light
(Has no hackable wire)
The emergency light is on. Emergency access is enabled (no access restrictions).
The emergency light is off. Emergency access is disabled (normal access restrictions).

Airlock Difficulties

Airlocks have 6 levels of difficulty levels. These changes the number and kinds of wire an airlock has and also label some wires for the easier ones, allowing you to know what the wires are in advance.

  • None: 4 power wires, 0 shock wires, 0 dud wires, Labelled wires: Open, Bolts, Shock, Safety, Timing.
  • Basic: 4 Power wires, 0 shock wires, 1 dud wire, Labelled wires: Safety, Timing.
  • Protected: 4 power wires, 1 shock wire, 1 dud wire.
  • Advanced: 4 power wires, 1 shock wire, 2 dud wires.
  • Elite: 4 power wires, 2 shock wires, 2 dud wires.
  • Maximum: 2 power wires, 2 shock wires, 2 dud wires.


Airlock Strategies

  • Use multitool to bolt doors open. Pulse the power wire, crowbar it open, then pulse the bolt wire. This will permanently bolt the door open, until someone fixes it. If a door is bolted, pulse the bolts wire, and go and then a power wire to be able to crowbar it.
  • Start pulsing top to bottom. Look at the "test light" as you pulse. If it switches to off you did it. Just crowbar it open. If you hit the bolt wire pulse it again to lift the bolts.
  • Use multitool to make the door stay open for a minute. Do this by first finding and pulsing a main power wire, then wait 10 seconds to see if auxiliary power turns on. If it doesn't go to another door and pulse the main power wire there. When auxiliary power is on (test light on), pulse wires until it turns off again. You have now found an auxiliary power wire. Then go to the door you wish to hack, pulse both the main and auxiliary power wire, then crowbar , and it will stay open at at least nearly a minute.
  • Ghetto hacking involves accessing a useless airlock and cutting all of the wires in order until the bolts drop, making a note of the wire you just cut. Keeping this in mind, you can now open restricted doors by cutting all the wires except the bolt control and then crowbarring that fucker open. Useful if you don't have a multi-tool. Note that this is a bad idea if you lack gloves.
  • Open ID restricted doors by pulsing a main power wire and then crowbarring it open. If it's bolted, be sure to pulse the bolt wire before you kill the power, since you can't bolt/unbolt an unpowered door.
  • Create a pain-in-the-ass-obstacle by dropping the bolts, cutting all the wires, and then welding the door shut. This is especially effective if you happen to have the only pair of insulated gloves on the station.
  • Remotely pulse an airlock by attaching a signaler, which when signaled pulses the wire it's attached to. This allows you to remotely bolt and unbolt a door, for instance.


Secure airlocks

Some airlocks are more secure than normal, and their wire panel is covered by a layer of shielding. To see the airlock's security level, examine it. There are 3 levels of airlock security:

  • Normal security

Normal airlocks, they have no additional security.

  • Medium security

To create a medium security airlock, use 2 sheets of metal on a normal airlock with an open panel.
No change in door resistance.
To access the wire panel, you need to:

  1. Open the panel with a screwdriver .
  2. Slice through the wires' protection with a welding tool .
  3. Proceed as normal.
  • High security

To create a high security airlock, use 2 sheets of plasteel on a normal airlock with open panel.
Armor is multiplied by 1.5, making the door harder to destroy through brute force.
To access the wire panel, you need to:

  1. Open the panel with a screwdriver .
  2. Cut through the electrified protective grille with wirecutters . If you don't wear insulated gloves, you may get shocked.
  3. Slice through the outer layer of plasteel using a welding tool .
  4. Remove the outer plasteel layer with a crowbar .
  5. Slice through the inner layer of plasteel using a welding tool .
  6. Remove the inner plasteel layer with a crowbar .
  7. Proceed as normal.

APC

Controls power to its assigned room. All APC breakers can be accessed via Power Monitoring Computers regardless of the lock status, so hope that whoever's fucking with the power isn't paying attention.

  1. Screwdriver in hand, click on APC to open the panel and expose the wiring.
  2. Click with an empty hand to access the wiring.
  3. Fiddle with the wires by pulsing to test each one and cutting what you need to.
  4. Screwdriver it back up to toggle lighting, equipment, and atmospherics as you see fit (unless you've killed the power).
  • Cover lock prevents the APC from opening. If it's off, you can use a crowbar to open the APC.
  • Interface lock prevents anyone from using the APC. It is normally removed by swiping an ID card.
Wires
Name Cutting Mending Pulsing
Power (2 wires) Disables power. May shock! Restores. May shock! Disables power for 2 minutes. You must cut and mend the wire to restore power.
ID lock Disable toggling the lock with an ID card. Restores. Unlocks APC interface for 30 seconds.
AI control Disables AI control. Restores. Very briefly disables AI control.
Status window
Name Status Shows that
Lock The interface light is red. APC is locked.
The interface light is green. APC is unlocked.
Power The short indicator is on. APC is not working.
The short indicator is off. APC is working.
AI control The AI connection light is off. AI/borgs can't interact with APC.
The AI connection light is on. AI/borgs can interact with APC.

Autolathe

I NEED 50,000 RCDS STAT!

  1. Click on the Autolathe to open it.
  2. Click on the Autolathe with a screwdriver in hand to access the wiring, then get a tool in your hand.
  3. There are two important wires, which are randomized, while the rest are duds. Cutting them toggles their light permanently, pulsing does so temporarily (30 secs or something). Red light is power and blue is hacked options. None of them shock you, so they're safe to hack.

Have fun accessing some new options.

Wires
Name Cutting Mending Pulsing
Power (shows red light if off) Power off. Power on. Short (~30 secs) toggle off.
Electrocution (shows green light if on) Electrocution. Off. Short (~30 secs) toggle on.
Hacked options (shows blue light if on) Options on. Off. Short (~30 secs) toggle on.

Air Alarm

Station flooded with plasma and all of the Atmos Techs and CE are incompetent and/or dead? Best to take matters into your own hands.

  1. Screwdriver to exposes wires.
  2. Click to display Air Alarm interface and Wiring interface.
  3. Three lights:
    • The Air Alarm is locked/unlocked.
    • The Air Alarm is working properly!/offline.
    • The 'AI control allowed' light is on/off.
  4. Five wires:
    • Access wire: Pulsing toggles the interface's ID lock. Cutting locks the interface permanently until mended.
    • Syphon wire: Pulsing toggles PANIC SYPHON on/off.
    • Power wire: Pulsing disable the Air Alarm for 30(?) seconds, you can cut and mend the wire if in a hurry. Cutting the disables the Air Alarm until mended.
    • AI Control wire: Pulsing will disable AI Control for 30(?) seconds. Cutting the wire disables the AI control until 30(?) seconds after mended.
    • Alarm wire: Cutting starts the alarm, pulsing resets the alarm.
  5. Screwdriver to close wiring.

Disabled Air Alarms will show no lights.

Wires
Name Cutting Mending Pulsing
Power Disables power. Restores. Disables power. Can be restored with mending.
Access Locks the interface completely until mended. Unlocks. Toggles interface ID lock on/off.
Syphon Starts PANIC SYPHON Nothing Toggles PANIC SYPHON on/off.
AI control Disables AI control. Restores after ~30 secs delay. Temporarily (~30 secs) disable.
Alarm Starts the alarm. Nothing Resets the alarm.

Security Cameras

The malfunctioning AI cannot siphon your air if you disable its eyes.

Cameras do not have a wire panel, simply click on the camera with the tools to hack it.

  1. With a screwdriver in hand, click on the camera.
  2. You can now do one of two things:
    • Wirecutters: Cutting an open camera will disable the camera, mending it will re-enable the camera.
      This will make a camera show up as "(deactivated)" in the camera list.
      The AI will receive a camera alert upon re-activation of a camera.
    • Multitool: Pulsing will toggle the camera's vision range from 7 tiles (the default) to 2 tiles. The AI will not receive any alerts.

Cyborgs

Use these tools in this order to hack a borg:

  1. ID Card, Emag or just ask the Cyborg to unlock its panel
  2. Crowbar the panel open
  3. Optional: Emag the cyborg and skip to "Afterwards" (does not work if its AI is malfunctional)
  4. Remove the power cell by clicking the borg with an empty hand
  5. Screwdriver to expose wires
  6. Wirecutters or Multitool to manipulate wires

Afterwards:

  1. Screwdriver to cover wires
  2. Replace the power cell
  3. Crowbar the panel shut
  4. Lock the panel with an ID Card. Cyborgs cannot lock their own panel.

Borgs have seven wires; five working ones and two duds:

Name Purpose Cutting Mending Pulsing
Law sync module Borg laws get updated when their master AI's laws do. Only works when AI link/slaving is active. Stops the borg from receiving law updates from its AI. Re-enables LawSync. Synchronizes laws with the borg's AI. Borg gently chimes.
Intelligence link Slaves the borg to an AI, forcing it to obey its orders. Needed for LawSync. Unslaves the borg from its current AI and disables LawSync. Nothing. You have to pulse the wire to slave a borg. Allows you to pick an AI for the borg to be slaved to.
Camera light Toggles the borg's camera. Toggles the camera status and kicks out anyone using it. Same as cutting. Same as cutting. Borg's camera lense focuses loudly.
Lockdown indicator Locks down the borg. Can also be done with a robotics console. Enables lockdown. Disables lockdown. Toggles lockdown status.
Reset module hardware Resets the borg's module so it can pick another one. Resets the Cyborg's module and prevents it from selecting a new one. Allows the borg to pick a new module. Nothing. Borg's module servos twitch.
Two dummy wires Nothing --- --- ---

An emagged cyborg will have no LawSync or AI link and cannot be reset: it must be deconstructed (or blown) and rebuilt.

Remember, cyborgs are very expensive! Do not destroy them unless the cyborg is completely out of control, and resetting the AI and LawSync status doesn't work.

It's also a dick move to blow a non rogue borg. Think of it as chopping someone's arms and legs off; you'll get bwoink'd unless you did it for a good reason.

MULEbot

No better way to get away from it all with a joyride on a MULE! And run over some people with it too.

  1. Unlock the controls with a Quartermaster's/Cargo Technician's/Head Of Personnel's/Captain's ID.
  2. Unscrew the maintenance panel with the screwdriver.
  3. See the table below and hack what you want.
  4. Screw the panel back on.
Wires
Name Cutting Mending Pulsing
Power (2 wires) One or both cut = disables power. Restores. The charge light flickers. -message.
Motor (2 wires) One cut = increases speed slightly.
Other cut = increases speed greatly.
Both cut = disables motor.
Restores. The drive motor whines briefly. -message.
Radio (4 wires) One or more cut = disables PDA control. Restores. You hear a radio crackle. -message.
Safety Disables safety, awakens thirst for blood.
(DON'T DO THIS UNLESS YOU'RE A TRAITOR OR WANT TO DIE)
Restores. The external warning lights flash briefly. -message.
Load Allows non-standard cargo (people, cyborgs, and other bots). Disables. The load platform clunks. -message.

Supply Shuttle Console

Who wants to unlock contraband?

This allows you to both order (for example advanced clowning supplies) and sell (human organs, pet hides) contraband items. This will not unlock as many crates as an Emag.

  1. Disassemble the Supply Shuttle Console with your screwdriver, crowbar and wirecutters
  2. Grab the supply computer circuitboard
  3. Multitool it and set its receiver to the appropriate spectrum
  4. Put it back in and reassemble the console. You can now order and sell contraband!

(Note that contraband is illegal. Security can do whatever they wish to it, and therefore you for bringing it on board)

Requests Console

Unhappy with your requests priority level? Crank it up to 'EXTREME'!

  1. Crowbar the requests console panel open.
  2. Use your screwdriver to enable the hidden priority level.
  3. Close the panel with your crowbar.

Particle Accelerator


What safer way to release the singularity than doing it REMOTELY! That, or you can hack it to make it shoot more powerful particles!

  1. Setup the PA if you haven't already, then use a screwdriver on the computer to open the panel/expose the wires.
  2. Now click on the computer with a hand to bring up the wire menu. Here you can then get your tools in hand.
    • Power wire: Pulsing toggles the PA on or off, cutting it will disable the PA and stop it from turning on.
    • Strength wire: Pulsing increases the strength of the PA, cutting it will set the strength to 0 and prevent people turning it up.
    • Interface wire: Interface wire will stop people being able to use the control computer. Pulsing will toggle this, cutting will turn it off until mended.
    • Limit wire: Cutting will allow the PA to be turned up to strength 3. When pulsed it will make a large whirring noise.
    • Nothing wire: Will do nothing, it's just here to make it harder.
  3. Close the panel for the PA to then work again. IMPORTANT: Don't forget to scan the parts again.

You can also attach a Signaler to these wires to release the singularity, such as remotely pulsing the strength wire. Bonus points if you also pulse the interface wire so that people can't stop it!

Wires
Name Cutting Mending Pulsing
Power Disables power. Restores. Toggles power on/off.
Strength Sets strength to 0 and prevents people from turning it up. Restores. Increases the strength.
Interface Stops people from being able to use the control computer. Restores. Toggles interface off/on.
Limit Allows PA to be turned up to strength 3. Restores. Makes a large whirring noise.
Nothing Nothing. Nothing. Nothing.

How To

  1. Set up the Particle Accelerator
  2. Screwdriver the monitor open
  3. Pulse the wires from up to down until you get the prompt stating that there's a whirring sound
  4. Cut the wire which prompted the statement
  5. Pulse the wires from up to down except for the limit wire
  6. Set up the tesla

Can easily be done in <30 seconds

Particle Emitter

There is only one wire: Pulse it to fire the emitter.

Syndicate Bomb

A bomb! Are you a bad enough dude?

  1. Check the description of the bomb to see if you have enough time left to even attempt a defusal. Use your best judgement for how much time you will need.
  2. If the timer is very long, you might want to ask toxins for a bomb suit in case you fail. You'll still be killed, but at least you'll leave a cloneable corpse.
  3. Screwdriver in hand, click on the bomb to open the panel and expose the wiring.
  4. With multitool, wirecutters, or an empty hand, click on the bomb to access the wiring.
  5. CAREFULLY fiddle with the wires by pulsing to test each one and cutting what you need to.
    • Boom wire: Pulsing will explode the bomb instantly if the bomb is live and cutting will do much the same! There's no way to prepare for the boom wire if the bomb is already live, it's just an inherent risk. Cutting a boom wire that's not live will make the bomb unusable.
    • Bolt wire: Pulsing will hint at this wire's function, cutting will release the bolts holding the bomb down if they were activated to begin with. Ditch that bomb!
    • Delay wire: Pulsing will add time to the clock of the bomb, giving you a little more breathing room.
    • Proceed wire: Pulsing will reduce the clock, making your life that much harder. Cutting this wire while the bomb is live will explode the bomb!
    • Activate wire: Pulsing a bomb that isn't live will start the countdown and cutting a bomb that IS live will stop the countdown. If you've identified this wire, you've won!

Keep in mind that randomly cutting live bomb wires carries a 40% risk of sudden death when pulsing carries just a 20% risk of sudden death! Ultimately you will HAVE to cut a wire to stop the explosion, but with a little research with pulsing you can improve your success rate. There's a test bomb in the armory if you want to practice without the risk of boom.

LIVE Bomb Wires
Name Cutting Mending Pulsing
Activate Stops the countdown. Nothing. Adds time to the timer. "The bomb seems to hesitate for a moment."
Delay Nothing. Nothing. Adds time to the timer. "The bomb chirps."
Bolt Releases the bolts (if they were activated) so that the bomb can be moved. Nothing. "The bolts spin in place for a moment."
Proceed Explodes. Nothing, u ded. Reduces time on the timer! "The bomb buzzes ominously!"
Boom Explodes. Nothing, u ded. Explodes.
NOT LIVE Bomb Wires
Name Cutting Mending Pulsing
Activate Nothing. Nothing. Starts the countdown.
Delay Nothing. Nothing. "The bomb chirps."
Bolt Releases the bolts (if they were activated) so that the bomb can be moved. Nothing. "The bolts spin in place for a moment."
Proceed Nothing. Nothing. "The bomb buzzes ominously!"
Boom Makes the bomb unusable. Restores. Nothing.

How to remove a bomb payload

To remove the payload from a syndicate bomb (or bomb assembly crafted from 10 plasteel) follow these steps:

  1. Make sure the bomb is not active. If it's counting down, cutting wires can make it explode.
  2. Open the bomb with a screwdriver .
  3. Click the bomb with wirecutters and cut all wires.
  4. Use a crowbar on the bomb to pry out the payload.

Plastic Explosives (C4)

For an awesome way to go out! These do not need to be opened with a screwdriver first.

  1. Only has one type of wire:
    • Explode wire: When cut, it explodes. When pulsed, it explodes!

You can attach a Signaler to make a remote bomb.

Wires
Name Cutting Mending Pulsing
Explode (2 wires) Explodes. Nothing. Explodes.

Vending Machines

The only thing worth hacking!

  1. Click on the vending machine to open it.
  2. Click on the vending machine with a screwdriver in hand to access the wiring, then get a tool in your hand.
  3. Button to toggle speaker on/off.
  4. Four lights:
    • The orange light is off.Indicates the machine is electrified when on.
    • The red light is blinking/off. Blinking indicate that it is working normally, off means it's in firing mode.
    • The green light is off/on. Indicate that contraband is available when on.
    • A purple/yellow light is on. Purple means access restrictions are on. Yellow means anyone can access.
  5. Four wires:
    • Firing wire: If pulsed will fire stuff at people contentiously until pulsed again. Cutting causes machine to fire stuff at people contentiously until mended. Toggles the red blinking light off when in firing mode.
    • Contraband wire: Cutting does nothing. When pulsed toggles availability of illegal or rare goods, also toggles the green light on/off.
    • Access wire: When pulsed it toggles the purple/yellow light, allowing for ID restricted machines (med machines, sec machines, and the bartenders Booze-o-mat) to be used by anyone when the yellow light is on.
    • Shock wire: Like the firing wire in effects from hacking, except it shocks instead of shoots, and toggles the orange light on. Pulsing this wire electrifies the machine for 30 seconds.
Wires
Name Cutting Mending Pulsing
Firing Causes the machine to fire stuff at people (turns off red blinking light). Restores. Toggles firing on/off.
Contraband Nothing. Nothing. Toggles illegal/rare goods availability on/off (shown by a green light).
Access Activates the access restriction. Nothing Toggles the access restriction(purple/yellow light).
Shock Causes the machine to electrocute people (shown by an orange light). Restores. Electrifies the machine for 30 seconds.

Secure Briefcase, Wall Safe

  1. Screwdriver in hand, click on the (briefcase/safe) to open the panel and expose the wiring
  2. Multitool the (briefcase/safe) until you get a confirmation that the memory is reset.
  3. Screwdriver the panel shut.
  4. If the briefcase/safe is either in its default state or its memory has been reset it will say ENTER NEW PASSCODE. Punch in a 5-digit code and click E to set it.
  5. Punch the same code and click E to unlock.


Click R to lock it. Locking works even if no code has been set. You can set a new code with the above steps even if it's locked. Alt-click an unlocked briefcase/safe to open it.

Safe

A safe can be opened by doing the following while holding a stethoscope:

  1. Spin the dial in one direction until you hear a "tink", "krink", or "plink" from the safe.
  2. Spin the dial in the other direction until you hear a "tonk", "krunk", or "plunk" and a "Spring", "Sprang", "Sproing", "Clunk", or "Krunk" from the safe.
  3. Open.

Radio/Intercom

  1. Screwdriver in hand, click on the radio.
  2. The usual radio use panel will pop up, but now with access to the wiring.
  3. Three wires:
    • Output wire: Pulsing toggles the speaker on/off. Cutting disables the speaker without showing it.
    • Input wire: Pulsing toggles the microphone on/off. Cutting disables the microphone without showing it.
    • Dummy wire: Pulsing turns the microphone and speaker off, but turns them on if they are both off already. Cutting does nothing.
  4. Screwdriver again to close the wires.

Interestingly, Tracking Beacons also count as radios.

Wires
Name Cutting Mending Pulsing
Output Disables speaker. Restores. Toggles speaker on/off.
Input Disables microphone. Restores. Toggles microphone on/off.
Dummy Nothing. Nothing. Toggles both the microphone and speaker on/off.

Security Gas Mask

Security Gas Mask has a hidden aggressiveness setting. Higher aggressiveness equals meaner "shitcurity" shouts coming out when the HALT-feature is used.

Use a screwdriver to change it from lowest (first) to highest (last) setting. For maximum aggressiveness, use wirecutters. Note that this can't be reset once you wirecut it.

Turn the setting to BEEPSKY MODE by using an Emag.

Suit Storage Unit

The thing nobody remembers to check.

Open the storage unit's maintenance panel with a screwdriver and two things can be changed:

  1. Pressing the button next to the green LED light will turn the safety off, allowing you to cram a body in.
  2. The UV energy dial can be cranked up from the original 15nm to 185nm, completely frying the contents of the storage to a crisp. Which may include the aforementioned body.

DNA Scanner

  1. Open maintenance panel with a screwdriver
  2. Use a multitool or wirecutters to access wiring
Wires
Name Cutting Mending Pulsing
ID Scan Disables access checks on connected console. Restores. Temporarily disables access checks on connected console.
Bolts Prevents locks being toggleable from DNA console. Restores. Toggles scanner locks.
Open Bolts open the scanner. Nothing. Opens/closes the scanner if it isn't locked.
Irradiate Disables scanner and irradiates. Restores and irradiates. Irradiates.
Shock (2 wires) High chance to shock. High chance to shock. Chance to shock.
Nothing (2 wires) Nothing. Nothing. Nothing.

Tesla Coil

Only one wire: Pulse it to trigger a tesla shock. Great if you attach a remote signaler!

Tips

  • You can get 1000 watt powercells out of space heaters for your evil needs.
  • Hacking doors: Cutting the power wire does 10 seconds to back up power. But pulsing also switches to back up power after 10 seconds, meaning if you want to open the same door for your exit you need to pulse the BACKUP wire to interrupt power. It switches back to primary after 1 minute again. Best thing is to pulse both the primary and backup then crowbar - that should give you the old style 1 minute window.
  • To restore primary power to a door immediately, cut then mend the primary power wire. Cutting + mending is incredibly useful when you've accidentally electrified a door, or shorted APC power.
  • Use screwdriver on mousetrap, attach to an igniter instead of a timer when making a grenade assembly, you've just made a landmine. Combine with a 100-100 potassium-water mix and anyone who steps on it will regret it.
  • Singularity’s EMP can be abused to short out lockers.
  • Inject plasma into a battery and insert it into a stun baton/prod. The next time someone attacks with the baton on it will blow up on them, seriously wounding both the holder and the stun target. Doing it with a high capacity battery or better will create a blast strong enough to turn the floor under the attacker to space, which will suck in the people caught in the blast and crit them before they can wake up. Use it as a suicide weapon or place it in the halls for some gullible fool to get himself killed with if you want to be banned if you're an antagonist.
  • You can emag the light replacer, which causes all of the lights to be filled with plasma which will ignite if the light bulb's turned on.
  • There is a single power cable supplying the entire station with power. If you don't feel like spending crystals for a power sink and you don't get seen for a minute near engineering, you can disable the power grid so that only very competent engineers will spot your sabotage. Though this only works if the solars aren’t set up.
  • You can emag buttons to remove access restrictions.
  • Wall-mounted flashers and portable flashers can be disabled with wirecutters.
  • If you screwdriver a heater you can take out its really crappy battery or adjust the temperature it outputs. The highest setting, 90 C, will actually hurt people extremely slowly if they aren't wearing internals.
  • You can screwdriver Detectives revolver and load .357 in it, but you can get blown up by this revolver. ADDED: Remember to unload the thing while you're doing it, or you'll shoot yourself in a similar manner to sawing a loaded shotgun.
  • As a traitor engineer, you could easily do the following:
    1. Go to a room, like a construction room, and find the APC's wire that shorts out the power.
    2. Grab two signalers and adjust their frequencies.
    3. Go to telecomms, in a hardsuit, and attach a signaler to the APC's power wire, which you found before. Close the APC and leave no traces.
    4. You can now disable comms any time you want for a few minutes - and unless someone checks the APC and/or doesn’t look too closely or asks the AI, they will think it was an ionospheric anomaly. HONK.
  • A good way to manually disable tcomms temperately is to set the filtering frequency on the hub to some number like 0.1. It'll block everything and most engineers don't know how to fix it.
  • If you want tcomms down for good, disconnect the network links. There are -very- few engineers who can fix that, and it'll take over ten minutes if they're experienced with how tcomms works. It'll probably force a shuttle call.
  • Another thing that can break tcomms: changing network of the machinery. It also breaks all links. Especially if you change it from tcommsat to something like tcomms or tcommsats, which is not that obvious when you take a look at it without knowing what is the issue. And even if they relink everything again it won't work. And then even if they realize that the problem is with the network name, when they change it back, it will reset all the links again!
  • If you see a pAI with a great reputation who you like, and someone else has claimed it first, use an emag to unbind it.
  • If someone is hacking a door and you want to keep them from following you, and you know all or most of the wires:
  1. Cut 1-3 useless wires (typically some combination of Door Control, ID Wire, Timing, Safety)
  2. Cut the bolt lights wire
  3. Cut the bolts wire
  4. Cut every other wire except the shock wire
  5. Cut the shock wire
This makes it incredibly obnoxious to follow you - if they don't know the wires and don't have insulated gloves, they're SOL because even the AI can't help them pursue.
  • Cutting the shock wire doesn't shock you, as far as I have been able to tell. Mending it, on the other hand....
  • If you want to test hacking doors without pissing off sec for breaking in somewhere and you have maint, you can make your own airlock with the aux tool storage thing and make it somewhere obscure.
  • Put bombs in the backpacks of brain-dead or catatonic people. ADDED: Advanced version: Get mouse traps, connect one with signaler with set frequency, then make a bomb with signaler on the same frequency. Put both in backpack. Wear it or leave it somewhere/on someone. ADDED: Wizard Mode: Take your 6 max cap bomb and build 6 voice analyzers from an autolathe. Set the trigger words to "Pete", "beat", "chick", "chicky", "boom". Find 6 station bound radios, and place each of them in a backpack with a corresponding bomb hidden about the station. Sing the song that ends the station.
  • The secret to hacking syndi bombs effectively is to remember that the only wire that doesn't do anything on pulse when the bomb isn't live is the boom wire (aka the one to attach a signaler to after you start the countdown for 4 hours then call attention to it).
  • You can wrench syndibombs to the ground so they can't be immediately picked up and spaced.
  • Deactivating cameras has them show up as (Deactivated) to anybody scrolling through cameras, but disassembling them completely removes them entirely from the list.
  • You can make remote voice-activated bombs:
    1. Attach Voice Analyzer with a Remote Signalling Device and set a frequency and a code-phrase.
    2. Make a grenade or a bomb, but instead of an igniter+timer, use an igniter+signaller and set it on the same frequency of your voice signaller.
    3. Now the grenade/bomb will blow up once you speak the code-word!
  • On a similar note, you can keep a 'revenge bomb' on you using a voice analyzer. If someone manages to send you in crit, you can whisper the code-word with your last breath (using '#'), to activate the bomb, and make your killer regret his actions.